Bells of Steel Accessory Holder (Wall or Rack Mounted)
2 colors/styles available — click a swatch to switch
$47.99$40.99Sold by Bells of Steel
Bid a not-so-fond farewell to impossibly tangled bands, sweat-soaked support wear, and chaotically misplaced Barbell Collars . You'll never look like one of those poor, helpless saps who can't do anything right in an infomercial again. Mount it directly to your wooden wall studs, your concrete wall, or your power rack (Hydra, Manticore or 2.3”) to keep your accessories secure, out of the way, and readily accessible for your next lifting masterpiece!
More like this
Bells of Steel Rack Attached Storage Basket
Tame gym clutter with the Rack Attached Storage Basket! This isn’t your grandma’s picnic basket. It’s crafted from 14-gauge steel and built to withstand the rigors of any serious gym environment. Thanks to the rugged design, all your fitness accessories are safe inside its fortress walls. Use a couple of Utility Hooks to hang your lever belt & lifting chains from the outside of the basket for even more #spacegainz Mount it on your power rack , storage system , or wall studs. IMPORTANT : Comes standard with rack-mounting hardware for tubing with ⅝” holes.
Bells of Steel 3 Barbell Wall Rack
This nifty wall mounted barbell holder lets you store your bars horizontally on your wall. It gives your bars the center-piece flair they deserve while giving you more room for activities — ahem, exercise. HDPE plastic lining protects the knurling on your barbell for a lifetime of lifting pleasure. Not so handy? No worries! All you need to install is a level and some basic tools. We highly recommend mounting it on your wall studs or using a stringer, but wall anchors are included as well as a third option.
Bells of Steel Utility Arm
Need a spot to hang your punching bag but fresh out of basement space? The Utility Arm mounts right onto your power rack or wall stud, transforming it into a full-on combat zone. Or, if you're more of a lover than a fighter, it doubles as moderate barbell , weight plate and/or accessory storage to keep your gym gear within arm's reach (literally). Equipped with 1" holes & 5/8" keyholes, the Utility Arm plays nice with Manticore & Hydra rack attachments , making it a true jack-of-all-trades. And if you're worried about space, don't sweat it!
Bells of Steel Utility Shackle Rack Attachment
Mounting gym equipment shouldn't feel like a DIY disaster waiting to happen. Whether it’s a heavy bag that’s too tricky to hang from high ceilings or gym rings and cable pulleys with a mind of their own, the Bells of Steel Utility Shackle Rack Attachment has you covered. Easily mount the Utility Shackle to a 3” x 3” power rack to keep your attachments secure. Or, mount it on a Utility Arm — maintaining full use of your rack while taking advantage of the often-overlooked side space.
Bells of Steel Above Rack Barbell Holder
Store a barbell above your power rack, converting it into a useable pull-up station - for smarter storage AND a bigger back. The 3D-printed Hydra Barbell Holder Rack Attachment is made to fit perfectly on true 3" x 3" tubing with 5/8" holes but will fit smaller racks with a DIY shim. With a 500lb capacity, this versatile storage solution will hold barbells up to 32mm in diameter. Place your barbell across the power rack for a makeshift pull-up station, ideal for lifters with a Lat Pulldown attachment.
Bells of Steel Vertical Mount Barbell Holder Rack Attachment
Ready to set a PR in home gym organization? Save space and get even more use out of your power rack by attaching a Vertical Mount Barbell Holder on the front or back of your uprights. Two bolts offer easy mounting, while an inner liner protects your barbell. The black powder coat offers rust resistance, and the 220lb max capacity can handle your barbell, even if you use it as a makeshift coat rack (please don't). Choose the Vertical Mount Barbell Holder that corresponds with your power rack measurements. Hardware included.
Bells of Steel Hanging Barbell Holders
Ready to display your barbells like the masterpieces they are? Welcome to the Metabolic Museum of Art. The Strengthsonian. The… you know what? You create one. We’re sick of doing all the heavy lifting around here. Hanging barbell holders are an economical & space-saving alternative to standalone bar storage like a 5 Barbell Holder . And when paired with a set of Plate Pegs , they can even replace an entire Bumper Plate Tree . You shouldn’t have to spend extra on a storage solution because it's a fancy, shmancy, big brand name.
Bells of Steel Safety Strap Connectors
Don't compromise on safety when it comes to your training! The Safety Strap Connectors mount to your rack uprights and act as an anchor point for safety straps. Together, they offer unparalleled protection and peace of mind, gently catching a loaded barbell without sacrificing security. IMPORTANT: Select connectors that match the upright & hole size of your power rack.
Bells of Steel Fixed Barbell Rack
Like a new parent, the Fixed Barbell Rack will have you showing off your babies with pride. Store up to 10 barbells with a space-efficient, easy-to-access design. This high-touch storage system fits various brands of fixed barbells, so you don't have to marry Bells of Steel (but you should; we're a catch.) The storage hooks are 35.5″ apart, so non-Bells of Steel barbells will also fit as long as the shaft of your bars is at least 36″ long. The Fixed Barbell Rack can hold fixed barbells or traditional Olympic barbells .
Bells of Steel Utility Hook
The Utility Hook is the smallest—but mightiest—gym storage solution. This solid steel s-hook easily slides into tubing holes up to 11 gauge (2.9mm thick). Organize your cable attachments along the center upright of your All-in-One Trainer . Hang lifting chains off the sides of the rear upright on your Cable Tower . Store your barbell across two hooks on a 76" wide Hydra Universal Storage System. And this is just the beginning. Beyond your gym's space restrictions, the only limit is your creativity. Don't be surprised if you get hooked .
Bells of Steel Hydra Batwing Storage
The Hydra Batwing Customizer mounts to the sides of your power rack to unlock huge storage for weight plates and accessories in a small footprint! Choose the height of your uprights and the number of cross-members, then add optional accessories for the perfect fit to match your space and training style. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks.
Bells of Steel Safety Straps for Hydra & Manticore Racks
Don't compromise on safety when it comes to your training. Safety Straps offer unparalleled protection and peace of mind, gently catching a loaded barbell without sacrificing security. Select the safeties that correspond with the depth and hole sizing of your power rack.
More from Bells of Steel
Add to one order and ship it together.
Bells of Steel Crumb Bumper Plates
It's time to bump up your lifting game. These crumb bumper plates have a thick stainless steel insert ring with 3 anchor points to prevent common bumper breakdowns. The crumb material is quieter than urethane bumpers. Ideal for lifters who don't have a platform and features coloured flecks for easier weight identification. The number one advantage of bumpers is safety for the lifter. A lifter who hesitates to dump a bad lift because they're afraid of damage to the floor or the equipment is more likely to get hurt. Bumpers take any worry about damage completely out of the equation.
Bells of Steel Dead Bounce Conflict Bumper Plate Sets
It's time to bump up your lifting game! These non-smelly, DB (dead bounce) virgin rubber bumper plates have a thick stainless steel insert ring with 3 anchor points to prevent common bumper breakdowns. The number one advantage of bumpers is safety for the lifter. A lifter who hesitates to dump a barbell because they're afraid of damage to the floor or the equipment is more likely to get hurt. Bumpers take any worry about damage completely out of the equation.
Bells of Steel Plastic Bottom for Adjustable Kettlebell
Broaden the weight range of your adjustable kettlebell to 9-11.5kg! This plastic bottom shell weighs just 0.7kg (1.5lb), making your empty Adjustable Kettlebell as light as 9kg (19.6lb). That's 3kg less than an empty full-steel version! Access the 9.5-11.5kg (20-25lb) increments using your kettlebell plates. The lighter range is great for single-arm exercises or beginners who don't want to shell out the money for a lighter kettlebell . Weight increments: - 9kg (empty) - 9.5kg - 10kg - 10.5kg - 11kg - 11.5kg IMPORTANT: Warranty is void if dropped.
Bells of Steel Manticore Flat Foot Components
Upgrade your non-flat-foot Manticore (or 3"x3" with 1" holes) power racks with our flat foot support system. Grab a pair of flat feet, some reinforcement plates, and an optional cross-member to hold everything together. The flat feet come in 54" and 63" lengths, with an optional 43" flat foot crossmember to connect them for added stability. The 54" length can be paired with the 24" and 30" crossmember depths, while the 63" length can be paired with the 24", 30" and 43" depths.
Bells of Steel Crumb Bumper Plate Sets
It's time to bump up your lifting game. These crumb bumper plates have a thick stainless steel insert ring with 3 anchor points to prevent common bumper breakdowns. The crumb material is quieter than urethane bumpers. Ideal for lifters who don't have a platform and features coloured flecks for easier weight identification. The number one advantage of bumpers is safety for the lifter. A lifter who hesitates to dump a bad lift because they're afraid of damage to the floor or the equipment is more likely to get hurt. Bumpers take any worry about damage completely out of the equation.
Bells of Steel Tricep Pressdown With Ergo Handgrips
Sculpt your arms into a set of triumphantly terrific triceps! The Tricep Pressdown with Ergo Handgrips is compatible with any cable machine using carabiners. The rubberized grips and large ends are grippy and comfortable to hold, so you work your tris to failure without feeling like you're holding onto a wet spaghetti noodle. IMPORTANT: Requires a carabiner (not included by default) for use on your cable machine.
Bells of Steel Viking Press Attachment
A barbell and a rack? Everyone has that. A Viking press landmine attachment in the corner? That's a different gym... and a different kind of shoulder day. Dust off the beater bar. Drop it into a landmine , load plates, slide the attachment over the sleeve, lock the knob. You're doing the viking press exercise in under a minute, no Strongman meet required. FOUR GRIP POSITIONS. 2 neutral, 2 regular. Narrow or wide, palms in or palms forward: press the way your shoulders actually want to move.
Bells of Steel Rubber Coated Iron Weight Plate Sets
If Mighty Grip Plates & Dead Bounce Conflict Bumper Plates had a baby, this would be it. The Rubber Coated Iron Weight Plates feature a durable 100% virgin rubber coating that is nearly odorless, so you’ll avoid the foul smell of low-quality rubber while protecting your equipment from damage. Plus, they’ll minimize noise — in case the clangin’ & bangin’ of iron plates remind you of nails on a chalkboard (we like your shopping habits, so we’ll let this one slide). The large ergonomic handles and rubber coating improve comfort on farmer walks, back extensions, and weighted crunches.
Bells of Steel LB Competition Bumper Plates
Wickedly precise and boldly colored, the Competition Bumper Plates are the perfect calibrated plates for Olympic lifting. These competition bumper plates don't just look amazing, they also closely align with IWF specs and outperform all-black bumpers . While they're not IWF approved, they do check the key boxes: 450mm diameter, color-coded, and guaranteed to +/- 0.1% of the claimed weight. The galvanized center hub with its co-molded steel collar won't spin or break from the rubber and uses an innovative method to securely lock the bolts in place.
Bells of Steel Ergo Rubber Hex Dumbbell Sets
These commercial-grade dumbbells are hex -ceptionally priced. Our hex dumbbells are made of 50% virgin and 50% recycled rubber — the perfect blend of environmentally-friendly and durable materials to reduce the noise and impact they make against your home gym flooring . Their chrome-plated handles are resistant to corrosion and rust and are ergonomically shaped for a comfortable grip. Plus, they feature fully-welded heads to maximize longevity. Prefer a consistently straight handle to hold? Straight Handle Dumbbells are also available.
Bells of Steel Nylon Adjustable Length Single Handle Cable Attachment
Isolate your arms, chest & more! The Nylon Adjustable Length Single Handle is compatible with any cable machine using carabiners and is excellent for curls, shoulder raises and chest flies. The handle rotates smoothly and the grips are comfortable to hold, so you can train to failure without feeling like you're holding onto a wet spaghetti noodle. Even better, it features 5 attachment points to your carabiner to make length adjustments a breeze. IMPORTANT: Requires a carabiner (not included by default) for use on your cable machine.
Bells of Steel USA Divider for Bumper Plate Shelf (Pack of 3)
These adjustable shelf dividers are designed to work seamlessly with both our dumbbell/kettlebell shelves and bumper plate/med ball shelves. Unlike fixed-slot dividers that lock you into rigid spacing, these dividers clamp on securely wherever you want them, giving you total control over your storage layout. IMPORTANT: Compatible with Bells of Steel Storage Shelves.