Bells of Steel Dead Bounce Conflict Bumper Plate Sets

It's time to bump up your lifting game! These non-smelly, DB (dead bounce) virgin rubber bumper plates have a thick stainless steel insert ring with 3 anchor points to prevent common bumper breakdowns. The number one advantage of bumpers is safety for the lifter. A lifter who hesitates to dump a barbell because they're afraid of damage to the floor or the equipment is more likely to get hurt. Bumpers take any worry about damage completely out of the equation.

by Bells of Steel

It's time to bump up your lifting game! These medium-bounce rubber bumper plates have a thick stainless steel insert ring with 3 anchor points to prevent common bumper breakdowns. The number one advantage of bumpers is safety for the lifter. A lifter who hesitates to dump a bad lift because they're afraid of damage to the floor or the equipment is more likely to get hurt. Bumpers take any worry about damage completely out of the equation.

by Bells of Steel

It's time to bump up your lifting game! These medium-bounce rubber bumper plates have a thick stainless steel insert ring with 3 anchor points to prevent common bumper breakdowns. The number one advantage of bumpers is safety for the lifter. A lifter who hesitates to dump a bad lift because they're afraid of damage to the floor or the equipment is more likely to get hurt. Bumpers take any worry about damage completely out of the equation.

by Bells of Steel

If Mighty Grip Plates & Dead Bounce Conflict Bumper Plates had a baby, this would be it. The Rubber Coated Iron Weight Plates feature a durable 100% virgin rubber coating that is nearly odorless, so you’ll avoid the foul smell of low-quality rubber while protecting your equipment from damage. Plus, they’ll minimize noise — in case the clangin’ & bangin’ of iron plates remind you of nails on a chalkboard (we like your shopping habits, so we’ll let this one slide). The large ergonomic handles and rubber coating improve comfort on farmer walks, back extensions, and weighted crunches.

by Bells of Steel

If Mighty Grip Plates & Dead Bounce Conflict Bumper Plates had a baby, this would be it. The Rubber Coated Iron Weight Plates feature a durable 100% virgin rubber coating that is nearly odorless, so you’ll avoid the foul smell of low-quality rubber while protecting your equipment from damage. Plus, they’ll minimize noise — in case the clangin’ & bangin’ of iron plates remind you of nails on a chalkboard (we like your shopping habits, so we’ll let this one slide). The large ergonomic handles and rubber coating improve comfort on farmer walks, back extensions, and weighted crunches.

by Bells of Steel

Wickedly precise and boldly colored, the Competition Bumper Plates are the perfect calibrated plates for Olympic lifting. These competition bumper plates don't just look amazing, they also closely align with IWF specs and outperform all-black bumpers . While they're not IWF approved, they do check the key boxes: 450mm diameter, color-coded, and guaranteed to +/- 0.1% of the claimed weight. The galvanized center hub with its co-molded steel collar won't spin or break from the rubber and uses an innovative method to securely lock the bolts in place.

by Bells of Steel

Wickedly precise and boldly colored, the Competition Bumper Plates are the perfect calibrated plates for Olympic lifting. These competition bumper plates don't just look amazing, they also closely align with IWF specs and outperform all-black bumpers . While they're not IWF approved, they do check the key boxes: 450mm diameter, color-coded, and guaranteed to +/- 0.1% of the claimed weight. The galvanized center hub with its co-molded steel collar won't spin or break from the rubber and uses an innovative method to securely lock the bolts in place.

by Bells of Steel

Set a strong foundation for strength with Technique Bumper Plates. These weight plates are the same size as their heavier big brothers, so your barbell height stays consistent whether you're warming up or learning the snatch (good luck). Your form stays flawless, and you stay injury-free—unless you trip over your own feet, but we can't help with that. Technique plates are perfect for beginners who are learning the ropes—or the bars. No more trying to guestimate your starting position with an empty bar or tiny 5lb plates.

by Bells of Steel

Wickedly precise and boldly colored, the Competition Bumper Plates are the perfect calibrated plates for Olympic lifting. These competition bumper plates don't just look amazing, they also closely align with IWF specs and outperform all-black bumpers . While they're not IWF approved, they do check the key boxes: 450mm diameter, color-coded, and guaranteed to -0.05%/+0.1% of the claimed weight. The galvanized center hub with its co-molded steel collar won't spin or break from the rubber and uses an innovative method to securely lock the bolts in place.

by Bells of Steel

Heavy-duty drop pads absorb impact, reduce noise, and protect your floors and weights during lifts.

by Bells of Steel

Tired of playing plate Jenga in your home gym? The Residential Bumper Plate Tree is your budget-friendly solution to weight plate chaos, handling up to 858lbs of weight without the higher price tag of commercial-grade options. Crafted from 14-gauge steel with a 57lb weight, this unit is sturdy enough for most lifters, while the rubber feet keep your floors safe from battle scars. Plus, the four welded bar holders mean your barbells can finally stop napping on the floor.

by Bells of Steel

Our Weightlifting Platforms bring together shock absorption, protection, and undeniable style, complete with bamboo centers that scream classy lifter energy in 8 unique configurations. Whether you’re tight on space or rocking a full pain cave, there’s a setup for you: Three-Layer Platforms (Three Layer 4 Square & 3 Square): Designed for lifters who go big and drop harder. The triple-layer base fits Deadlift Pads for unmatched noise and momentum absorption. Single-Layer Platforms (12, 9, 8, 6, 4 & 3 Square): Rubber-backed, bamboo-centered, and ready for action.

by Bells of Steel

If Mighty Grip Plates & Dead Bounce Conflict Bumper Plates had a baby, this would be it. The Rubber Coated Iron Weight Plates feature a durable 100% virgin rubber coating that is nearly odorless, so you’ll avoid the foul smell of low-quality rubber while protecting your equipment from damage. Plus, they’ll minimize noise — in case the clangin’ & bangin’ of iron plates remind you of nails on a chalkboard (we like your shopping habits, so we’ll let this one slide). The large ergonomic handles and rubber coating improve comfort on farmer walks, back extensions, and weighted crunches.

by Bells of Steel

Made of recycled rubber powder, this ultra-smooth rubber roll is perfect for covering your whole home gym or commercial gym. With a home gym you get the joy of adding flooring around awkwardly shaped objects like furnaces, vents, and load-bearing walls. No reason to panic, though! A sharp utility knife and some careful trimming will save the day. Its easy-to-clean rubber surface simply needs a quick once-over with a mop, and you're good to go. And while mopping is a great warm-up, maybe wait until after you squat so you don't turn your PR into an ER.

by Bells of Steel

A barbell and a rack? Everyone has that. A Viking press landmine attachment in the corner? That's a different gym... and a different kind of shoulder day. Dust off the beater bar. Drop it into a landmine , load plates, slide the attachment over the sleeve, lock the knob. You're doing the viking press exercise in under a minute, no Strongman meet required. FOUR GRIP POSITIONS. 2 neutral, 2 regular. Narrow or wide, palms in or palms forward: press the way your shoulders actually want to move.

by Bells of Steel

The Utility Horn easily mounts on your rack for quick access to your Olympic weight plates , bands, or chains — whatever you need handy up to 100lbs (or 132lbs for Manticore). It keeps your stuff off the floor to give you more room to smash your goals. The cotter pin offers extra security and stability while making it easy to move around until you find the perfect spot. Plus, the black powder coating provides rust resistance.

by Bells of Steel

Replacement monitor for the Blitz Bike & Residential Blitz Bike .

by Bells of Steel

The Utility Hook is the smallest—but mightiest—gym storage solution. This solid steel s-hook easily slides into tubing holes up to 11 gauge (2.9mm thick). Organize your cable attachments along the center upright of your All-in-One Trainer . Hang lifting chains off the sides of the rear upright on your Cable Tower . Store your barbell across two hooks on a 76" wide Hydra Universal Storage System. And this is just the beginning. Beyond your gym's space restrictions, the only limit is your creativity. Don't be surprised if you get hooked .

by Bells of Steel

If you want bragging rights for having the nicest plates on the block, then these Urethane Change Plates are a must-have. Due to their urethane construction, colors have more "pop" to them. This makes lettering and numbers appear crisper, adding a noticeable level of professionalism that'll make others go "DAAAAAMNN!" Urethane is also a much harder material than rubber, so these urethane change plates are a huge step above the durability of rubber bumpers — even our competition bumper plates can't match their toughness.

by Bells of Steel

These adjustable shelf dividers are designed to work seamlessly with both our dumbbell/kettlebell shelves and bumper plate/med ball shelves. Unlike fixed-slot dividers that lock you into rigid spacing, these dividers clamp on securely wherever you want them, giving you total control over your storage layout. IMPORTANT: Compatible with Bells of Steel Storage Shelves.

by Bells of Steel

The Weight Vest turns up the burn on your bodyweight exercises, conditioning workouts, and cardio sessions. Adjustable for a snug fit, it hugs your body like your favorite hoodie but adds, well, weights. Using it is simple: slide in your desired training plates — available in 5lb, 7.5lb, 10lb, and 20lb pairs — and strap the vest on. It’s highly adjustable with thick-padded shoulder straps & raised padded areas inside, improving breathability. The weight stays close to your body, so you can focus on form.

by Bells of Steel

Looking to upgrade your Hydra Rack? Or build your own franken-rack? Maybe even upgrade your non-Bells of Steel Rack that's also true 3 x 3 inch with 5/8 inch holes?Uprights are the vertical bars that connect the crossmembers of your power rack. They're easy to install and come in different lengths and styles to suit your needs and preferencesThey add functionality to your rack by allowing you to mount rack attachments like a seal row pad, lever arms, and more.Unless otherwise indicated, uprights are sold in pairs (2 pieces) and do not include hardware.

by Bells of Steel

Broaden the weight range of your adjustable kettlebell to 9-11.5kg! This plastic bottom shell weighs just 0.7kg (1.5lb), making your empty Adjustable Kettlebell as light as 9kg (19.6lb). That's 3kg less than an empty full-steel version! Access the 9.5-11.5kg (20-25lb) increments using your kettlebell plates. The lighter range is great for single-arm exercises or beginners who don't want to shell out the money for a lighter kettlebell . Weight increments: - 9kg (empty) - 9.5kg - 10kg - 10.5kg - 11kg - 11.5kg IMPORTANT: Warranty is void if dropped.

by Bells of Steel

So you think you shouldn’t lift heavier than you can hold? Pfffft . Get a GRIP. Sure, we’re all for improving your grip s trength and * ahem * getting your hands dirty, but let’s be real: your grip shouldn’t limit you from growing the LARGEST muscles in your body. The Figure 8 design provides an ultra-fast and easy setup, with durable quality made to last. Studies showed that using straps leads to greater perceived grip security and power — and there’s nothing we weightlifters more than a placebo effect. I’ll take my questionable supps shaken, not stirred, thanks.

by Bells of Steel