Bells of Steel Utility Hook
$14.99$13.99Sold by Bells of Steel
The Utility Hook is the smallest—but mightiest—gym storage solution. This solid steel s-hook easily slides into tubing holes up to 11 gauge (2.9mm thick). Organize your cable attachments along the center upright of your All-in-One Trainer . Hang lifting chains off the sides of the rear upright on your Cable Tower . Store your barbell across two hooks on a 76" wide Hydra Universal Storage System. And this is just the beginning. Beyond your gym's space restrictions, the only limit is your creativity. Don't be surprised if you get hooked .
More like this
Bells of Steel Rack Attached Storage Basket
Tame gym clutter with the Rack Attached Storage Basket! This isn’t your grandma’s picnic basket. It’s crafted from 14-gauge steel and built to withstand the rigors of any serious gym environment. Thanks to the rugged design, all your fitness accessories are safe inside its fortress walls. Use a couple of Utility Hooks to hang your lever belt & lifting chains from the outside of the basket for even more #spacegainz Mount it on your power rack , storage system , or wall studs. IMPORTANT : Comes standard with rack-mounting hardware for tubing with ⅝” holes.
Bells of Steel Fixed Barbell Rack
Like a new parent, the Fixed Barbell Rack will have you showing off your babies with pride. Store up to 10 barbells with a space-efficient, easy-to-access design. This high-touch storage system fits various brands of fixed barbells, so you don't have to marry Bells of Steel (but you should; we're a catch.) The storage hooks are 35.5″ apart, so non-Bells of Steel barbells will also fit as long as the shaft of your bars is at least 36″ long. The Fixed Barbell Rack can hold fixed barbells or traditional Olympic barbells .
Bells of Steel Utility Arm
Need a spot to hang your punching bag but fresh out of basement space? The Utility Arm mounts right onto your power rack or wall stud, transforming it into a full-on combat zone. Or, if you're more of a lover than a fighter, it doubles as moderate barbell , weight plate and/or accessory storage to keep your gym gear within arm's reach (literally). Equipped with 1" holes & 5/8" keyholes, the Utility Arm plays nice with Manticore & Hydra rack attachments , making it a true jack-of-all-trades. And if you're worried about space, don't sweat it!
Bells of Steel Accessory Holder (Wall or Rack Mounted)
Bid a not-so-fond farewell to impossibly tangled bands, sweat-soaked support wear, and chaotically misplaced Barbell Collars . You'll never look like one of those poor, helpless saps who can't do anything right in an infomercial again. Mount it directly to your wooden wall studs, your concrete wall, or your power rack (Hydra, Manticore or 2.3”) to keep your accessories secure, out of the way, and readily accessible for your next lifting masterpiece!
Bells of Steel Above Rack Barbell Holder
Store a barbell above your power rack, converting it into a useable pull-up station - for smarter storage AND a bigger back. The 3D-printed Hydra Barbell Holder Rack Attachment is made to fit perfectly on true 3" x 3" tubing with 5/8" holes but will fit smaller racks with a DIY shim. With a 500lb capacity, this versatile storage solution will hold barbells up to 32mm in diameter. Place your barbell across the power rack for a makeshift pull-up station, ideal for lifters with a Lat Pulldown attachment.
Bells of Steel Utility Shackle Rack Attachment
Mounting gym equipment shouldn't feel like a DIY disaster waiting to happen. Whether it’s a heavy bag that’s too tricky to hang from high ceilings or gym rings and cable pulleys with a mind of their own, the Bells of Steel Utility Shackle Rack Attachment has you covered. Easily mount the Utility Shackle to a 3” x 3” power rack to keep your attachments secure. Or, mount it on a Utility Arm — maintaining full use of your rack while taking advantage of the often-overlooked side space.
Bells of Steel 3 Barbell Wall Rack
This nifty wall mounted barbell holder lets you store your bars horizontally on your wall. It gives your bars the center-piece flair they deserve while giving you more room for activities — ahem, exercise. HDPE plastic lining protects the knurling on your barbell for a lifetime of lifting pleasure. Not so handy? No worries! All you need to install is a level and some basic tools. We highly recommend mounting it on your wall studs or using a stringer, but wall anchors are included as well as a third option.
Bells of Steel Wall-Mounted Plate Storage Rack
Vertical storage is like a pillar of perfection, nay, a beacon of hope, of home gym storage. While we love the rack-mountable plate pegs, we also appreciate wanting more space for attachments. The Wall Mounted Plate Storage Rack is the best of both worlds. This space-saving storage solution mounts directly to a stud or concrete wall to keep your plates tidy and secure. Four 12.6″ plate pegs and a 793lb total capacity offer plenty of space for your weight plates with 2" holes. Customize the peg spacing to show off your collection in style.
Bells of Steel Hanging Barbell Holders
Ready to display your barbells like the masterpieces they are? Welcome to the Metabolic Museum of Art. The Strengthsonian. The… you know what? You create one. We’re sick of doing all the heavy lifting around here. Hanging barbell holders are an economical & space-saving alternative to standalone bar storage like a 5 Barbell Holder . And when paired with a set of Plate Pegs , they can even replace an entire Bumper Plate Tree . You shouldn’t have to spend extra on a storage solution because it's a fancy, shmancy, big brand name.
Bells of Steel Vertical Mount Barbell Holder Rack Attachment
Ready to set a PR in home gym organization? Save space and get even more use out of your power rack by attaching a Vertical Mount Barbell Holder on the front or back of your uprights. Two bolts offer easy mounting, while an inner liner protects your barbell. The black powder coat offers rust resistance, and the 220lb max capacity can handle your barbell, even if you use it as a makeshift coat rack (please don't). Choose the Vertical Mount Barbell Holder that corresponds with your power rack measurements. Hardware included.
Bells of Steel USA Storage Shelves
These Storage Shelves are designed to handle everything from dumbbells to med balls without sacrificing floor space or durability. This versatile beast adapts as your gear (and impulse buys) grow. Each shelf holds up to 450kg (almost 1,000lbs!). Mount to your Hydra or Manticore power rack with ⅝” holes/keyholes. Choose between: Solid-bottom Dumbbell & Kettlebell Shelf – Mount flat or tilted, with an optional lip to keep your gear from bailing. Open-rail Bumper & Med Ball Shelf – Two rails, open center, built to cradle the heaviest bumpers to the tiniest B.o.S medicine balls.
Bells of Steel Residential Dumbbell Rack
Step up your home gym game with the upgraded Residential Dumbbell Rack! This three-tier Dumbbell Rack can handle up to 1,000lbs and is perfect for your home gym. Each rack fits our 5-50lb set or 55-80lb set of dumbbells . Its 2' x 4' footprint occupies minimal space in your living lifting room and weighs only 73lbs, making this must-have storage unit easy to assemble and move. Version 2.0 features: 2.3" x 2.3" tubing with ⅝” holes, so it’s compatible with 2.3” rack attachments. Need an adaptable storage rack? Check out the Commercial Interchangeable Weight Rack .
More from Bells of Steel
Add to one order and ship it together.
Bells of Steel Fat Bar - Tricep Pressdown
Sculpt your arms into a set of triumphantly terrific triceps with the Fat Bar Tricep Pressdown! Whether you’re into grappling sports, arm wrestling, or just want to build your grip strength, fat bar attachments are a game-changer. Its unique design builds your grip in ways a typical cable attachment can’t match and allows for peak tricep targeting on tricep pushdowns. Compatible with any cable machine using a carabiner. IMPORTANT: Requires a carabiner (not included by default) for use on your cable machine.
Bells of Steel Manticore Flat Foot Components
Upgrade your non-flat-foot Manticore (or 3"x3" with 1" holes) power racks with our flat foot support system. Grab a pair of flat feet, some reinforcement plates, and an optional cross-member to hold everything together. The flat feet come in 54" and 63" lengths, with an optional 43" flat foot crossmember to connect them for added stability. The 54" length can be paired with the 24" and 30" crossmember depths, while the 63" length can be paired with the 24", 30" and 43" depths.
Bells of Steel Lat Pulldown Low Row Machine
Overview The Bells of Steel Lat Pulldown / Low Row Machine is a heavy duty back-training beast built for lifters who want buttery-smooth cable work without sacrificing half their house of gains. With a smooth 310 lb selectorized stack or plate loaded option, adjustable thigh pads, built-in band pegs, and high/low pulley versatility, this machine delivers wide-grip lat work, heavy low rows, arm training, and cable accessory movements — big back energy without the space demands of a full functional trainer.
Bells of Steel Classic Figure 8 Lifting Straps
So you think you shouldn’t lift heavier than you can hold? Pfffft . Get a GRIP. Sure, we’re all for improving your grip s trength and * ahem * getting your hands dirty, but let’s be real: your grip shouldn’t limit you from growing the LARGEST muscles in your body. The Figure 8 design provides an ultra-fast and easy setup, with durable quality made to last. Studies showed that using straps leads to greater perceived grip security and power — and there’s nothing we weightlifters more than a placebo effect. I’ll take my questionable supps shaken, not stirred, thanks.
Bells of Steel Hydra Flat Foot Power Rack - Prebuilt (3" x 3", ⅝" Holes)
The Flat Foot Power Rack is where classic design and rock-solid stability team up with a chalky fist bump of swoleship. Its 1,000-pound capacity outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks. By matching the same tubing specs as many of our American competitors, you can mix and match attachments freely without needing to stick to one brand - hello, open ecosystem!
Bells of Steel Roll of Gym Flooring (50')
Made of recycled rubber powder, this ultra-smooth rubber roll is perfect for covering your whole home gym or commercial gym. With a home gym you get the joy of adding flooring around awkwardly shaped objects like furnaces, vents, and load-bearing walls. No reason to panic, though! A sharp utility knife and some careful trimming will save the day. Its easy-to-clean rubber surface simply needs a quick once-over with a mop, and you're good to go. And while mopping is a great warm-up, maybe wait until after you squat so you don't turn your PR into an ER.
Bells of Steel USA Blitz Bike Monitor
Replacement monitor for the Blitz Bike & Residential Blitz Bike .
Bells of Steel Weighted Vest
The Weight Vest turns up the burn on your bodyweight exercises, conditioning workouts, and cardio sessions. Adjustable for a snug fit, it hugs your body like your favorite hoodie but adds, well, weights. Using it is simple: slide in your desired training plates — available in 5lb, 7.5lb, 10lb, and 20lb pairs — and strap the vest on. It’s highly adjustable with thick-padded shoulder straps & raised padded areas inside, improving breathability. The weight stays close to your body, so you can focus on form.
Bells of Steel Ergo Rubber Hex Dumbbells
These commercial-grade dumbbells are hex -ceptionally priced. Our hex dumbbells are made of 50% virgin and 50% recycled rubber — the perfect blend of environmentally-friendly and durable materials to reduce the noise and impact they make against your home gym flooring . Their chrome-plated handles are resistant to corrosion and rust and are ergonomically shaped for a comfortable grip. Plus, they feature fully-welded heads to maximize longevity. Prefer a consistently straight handle to hold? Straight Handle Dumbbells are also available.
Bells of Steel Squat Stands (2.3" x 2.3", ⅝" HOLES)
Weighing in at a beefy 73lbs for maximum stability, the Squat Stands 3.0 can be used in home gyms or commercial settings, for instance, weightlifting clubs. Superior 1" spacing through the bench and pull zone and 2" spacing above and below allow you to select the perfect height for your j-cups, for precision lift-offs that can make the difference between a good rep and a superb rep. Trying to decide between squat stands and a power rack? Then check out Squat Stands vs Power Racks: How to Choose .
Bells of Steel Glute Ham Slider
The perfect posterior chain pulverizer, the Glute Ham Slider allows you to tuck your heels or toes into to perform a multitude of hamstring blasting movements or use the handles for ab rolls and other creative upper body exercises. Use the eyelet to connect to a cable machine for even more versatility. The heavy-duty wheels and black powder coat provide durability, rust resistance, and a smooth ride with a space-efficient design that makes storage simple.
Bells of Steel USA Buzzsaw Seat Pad
A replacement seat pad (smaller pad, for the butt) for the Buzzsaw Bench . Compatible with: - Buzzsaw Bench (BSAW-BEN) - Buzzsaw Bench (BLUT-BSAW2-BEN) - Buzzsaw Bench (SPU-BSAW2-BEN) - Buzzsaw Bench (BSAW2-BEN)