Bells of Steel Rack Attached Storage Basket

The Utility Hook is the smallest—but mightiest—gym storage solution. This solid steel s-hook easily slides into tubing holes up to 11 gauge (2.9mm thick). Organize your cable attachments along the center upright of your All-in-One Trainer . Hang lifting chains off the sides of the rear upright on your Cable Tower . Store your barbell across two hooks on a 76" wide Hydra Universal Storage System. And this is just the beginning. Beyond your gym's space restrictions, the only limit is your creativity. Don't be surprised if you get hooked .

by Bells of Steel

Bid a not-so-fond farewell to impossibly tangled bands, sweat-soaked support wear, and chaotically misplaced Barbell Collars . You'll never look like one of those poor, helpless saps who can't do anything right in an infomercial again. Mount it directly to your wooden wall studs, your concrete wall, or your power rack (Hydra, Manticore or 2.3”) to keep your accessories secure, out of the way, and readily accessible for your next lifting masterpiece!

by Bells of Steel

Like a new parent, the Fixed Barbell Rack will have you showing off your babies with pride. Store up to 10 barbells with a space-efficient, easy-to-access design. This high-touch storage system fits various brands of fixed barbells, so you don't have to marry Bells of Steel (but you should; we're a catch.) The storage hooks are 35.5″ apart, so non-Bells of Steel barbells will also fit as long as the shaft of your bars is at least 36″ long. The Fixed Barbell Rack can hold fixed barbells or traditional Olympic barbells .

by Bells of Steel

The Utility Horn easily mounts on your rack for quick access to your Olympic weight plates , bands, or chains — whatever you need handy up to 100lbs (or 132lbs for Manticore). It keeps your stuff off the floor to give you more room to smash your goals. The cotter pin offers extra security and stability while making it easy to move around until you find the perfect spot. Plus, the black powder coating provides rust resistance.

by Bells of Steel

Need a spot to hang your punching bag but fresh out of basement space? The Utility Arm mounts right onto your power rack or wall stud, transforming it into a full-on combat zone. Or, if you're more of a lover than a fighter, it doubles as moderate barbell , weight plate and/or accessory storage to keep your gym gear within arm's reach (literally). Equipped with 1" holes & 5/8" keyholes, the Utility Arm plays nice with Manticore & Hydra rack attachments , making it a true jack-of-all-trades. And if you're worried about space, don't sweat it!

by Bells of Steel

Vertical storage is like a pillar of perfection, nay, a beacon of hope, of home gym storage. While we love the rack-mountable plate pegs, we also appreciate wanting more space for attachments. The Wall Mounted Plate Storage Rack is the best of both worlds. This space-saving storage solution mounts directly to a stud or concrete wall to keep your plates tidy and secure. Four 12.6″ plate pegs and a 793lb total capacity offer plenty of space for your weight plates with 2" holes. Customize the peg spacing to show off your collection in style.

by Bells of Steel

This nifty wall mounted barbell holder lets you store your bars horizontally on your wall. It gives your bars the center-piece flair they deserve while giving you more room for activities — ahem, exercise. HDPE plastic lining protects the knurling on your barbell for a lifetime of lifting pleasure. Not so handy? No worries! All you need to install is a level and some basic tools. We highly recommend mounting it on your wall studs or using a stringer, but wall anchors are included as well as a third option.

by Bells of Steel

Store a barbell above your power rack, converting it into a useable pull-up station - for smarter storage AND a bigger back. The 3D-printed Hydra Barbell Holder Rack Attachment is made to fit perfectly on true 3" x 3" tubing with 5/8" holes but will fit smaller racks with a DIY shim. With a 500lb capacity, this versatile storage solution will hold barbells up to 32mm in diameter. Place your barbell across the power rack for a makeshift pull-up station, ideal for lifters with a Lat Pulldown attachment.

by Bells of Steel

Ready to set a PR in home gym organization? Save space and get even more use out of your power rack by attaching a Vertical Mount Barbell Holder on the front or back of your uprights. Two bolts offer easy mounting, while an inner liner protects your barbell. The black powder coat offers rust resistance, and the 220lb max capacity can handle your barbell, even if you use it as a makeshift coat rack (please don't). Choose the Vertical Mount Barbell Holder that corresponds with your power rack measurements. Hardware included.

by Bells of Steel

Ready to display your barbells like the masterpieces they are? Welcome to the Metabolic Museum of Art. The Strengthsonian. The… you know what? You create one. We’re sick of doing all the heavy lifting around here. Hanging barbell holders are an economical & space-saving alternative to standalone bar storage like a 5 Barbell Holder . And when paired with a set of Plate Pegs , they can even replace an entire Bumper Plate Tree . You shouldn’t have to spend extra on a storage solution because it's a fancy, shmancy, big brand name.

by Bells of Steel

Keep your change plates conveniently stored and accessible to bust through your next plateau. With 8" loadable sleeves, Change Plate Pegs bolt onto your rack uprights for easy access to your Olympic change plates . Triple pegs for additional storage to keep your fractional plates organized and ready for your next 1lb PR. Trust us — it counts! You can throw resistance bands and other accessories on there, too, if you want; we aren't checking. The Manticore version comes with UHMW protection for your uprights , and rubber stoppers to prevent your plates from hitting the mounting bolt heads.

by Bells of Steel

These Storage Shelves are designed to handle everything from dumbbells to med balls without sacrificing floor space or durability. This versatile beast adapts as your gear (and impulse buys) grow. Each shelf holds up to 450kg (almost 1,000lbs!). Mount to your Hydra or Manticore power rack with ⅝” holes/keyholes. Choose between: Solid-bottom Dumbbell & Kettlebell Shelf – Mount flat or tilted, with an optional lip to keep your gear from bailing. Open-rail Bumper & Med Ball Shelf – Two rails, open center, built to cradle the heaviest bumpers to the tiniest B.o.S medicine balls.

by Bells of Steel

Your college days might be over, but it's not too late to do another keg stand train like a varsity athlete. Its 1,000-pound capacity outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks. By matching the same tubing specs as many of our American competitors, you can mix and match attachments freely without needing to stick to one brand - hello, open ecosystem!

by Bells of Steel

The perfect posterior chain pulverizer, the Glute Ham Slider allows you to tuck your heels or toes into to perform a multitude of hamstring blasting movements or use the handles for ab rolls and other creative upper body exercises. Use the eyelet to connect to a cable machine for even more versatility. The heavy-duty wheels and black powder coat provide durability, rust resistance, and a smooth ride with a space-efficient design that makes storage simple.

by Bells of Steel

If you want bragging rights for having the nicest plates on the block, then these Urethane Change Plates are a must-have. Due to their urethane construction, colors have more "pop" to them. This makes lettering and numbers appear crisper, adding a noticeable level of professionalism that'll make others go "DAAAAAMNN!" Urethane is also a much harder material than rubber, so these urethane change plates are a huge step above the durability of rubber bumpers — even our competition bumper plates can't match their toughness.

by Bells of Steel

With the Luxury Sit Up Mat, you’ll be looking forward to those hard-core workouts. This mat is designed to maintain your lumbar curvature so the focus stays on your core rather than letting your hip flexors take over. This lightweight, portable mat is textured to prevent slipping, so you get more out of every rep. The extra padding protects your back and tailbone, providing extra comfort on hard gym floors.

by Bells of Steel

Sick of bracing your feet on a skinny beam mid–lat pulldown? Enter the Footplate for Cable Towers & All In One Trainers: a simple, sturdy add-on that fixes one of the most annoying cable tower quirks. No bolts, no assembly, no fuss. Just pop it out of the box, set it in place, and once your feet are planted, it stays locked down tighter than your lifting belt on PR day. Small upgrade, BIG difference in comfort and stability. This grippy checkerboard steel plate slides right onto your Bells of Steel 2.3” x 2.3” (60mm) setup: Cable Tower , All-in-One Trainer , or Power Rack .

by Bells of Steel

Replacement monitor for the Blitz Bike & Residential Blitz Bike .

by Bells of Steel

While we value honesty in a relationship, your hips should actually lie sometimes — particularly whenever (wherever) you’re doing sit-ups. The Sit Up Mat is designed to maintain your lumbar curvature so the focus stays on your core rather than letting your hip flexors take over. This lightweight, portable mat is textured to prevent slipping, so you get more out of every rep. You can also use it for cushioning during floor work or handstand push-ups, a makeshift yoga block, or a pillow when you get sent to sleep in your garage gym after buying yet another B.o.S. Bestseller . Feeling boujie?

by Bells of Steel

It's time to bump up your lifting game! These non-smelly, DB (dead bounce) virgin rubber bumper plates have a thick stainless steel insert ring with 3 anchor points to prevent common bumper breakdowns. The number one advantage of bumpers is safety for the lifter. A lifter who hesitates to dump a barbell because they're afraid of damage to the floor or the equipment is more likely to get hurt. Bumpers take any worry about damage completely out of the equation.

by Bells of Steel

A replacement seat pad (smaller pad, for the butt) for the Buzzsaw Bench . Compatible with: - Buzzsaw Bench (BSAW-BEN) - Buzzsaw Bench (BLUT-BSAW2-BEN) - Buzzsaw Bench (SPU-BSAW2-BEN) - Buzzsaw Bench (BSAW2-BEN)

by Bells of Steel

These commercial-grade dumbbells are hex -ceptionally priced. Our hex dumbbells are made of 50% virgin and 50% recycled rubber — the perfect blend of environmentally-friendly and durable materials to reduce the noise and impact they make against your home gym flooring . Their chrome-plated handles are resistant to corrosion and rust and are ergonomically shaped for a comfortable grip. Plus, they feature fully-welded heads to maximize longevity. Prefer a consistently straight handle to hold? Straight Handle Dumbbells are also available.

by Bells of Steel

Elevate your cardio workouts with the Blitz Magnetic Resistance Manual Treadmill! 6 magnetic resistance levels, so you can walk, jog, sprint, or sled push. Magnetic resistance offers an ultra-smooth and highly responsive experience with minimal maintenance. The steep 17° curve will light your posterior chain on fire. When you're ready to really feel the burn, crank up the resistance and brace against the padded front handles for a sled push - turning your monotonous cardio workouts into exciting calorie bonfires.

by Bells of Steel

Adjustable jump rope with a 10' max length and ergonomic handles so you can crush your cardio and plyo training. Includes two cable types and a convenient storage bag so you can double under your way to cardio dominance.

by Bells of Steel