Bells of Steel Vertical Mount Barbell Holder Rack Attachment
$73.99$64.99Sold by Bells of Steel
Ready to set a PR in home gym organization? Save space and get even more use out of your power rack by attaching a Vertical Mount Barbell Holder on the front or back of your uprights. Two bolts offer easy mounting, while an inner liner protects your barbell. The black powder coat offers rust resistance, and the 220lb max capacity can handle your barbell, even if you use it as a makeshift coat rack (please don't). Choose the Vertical Mount Barbell Holder that corresponds with your power rack measurements. Hardware included.
More like this
Bells of Steel Hydra Vertical Bar Holder for Flat Foot
Ready to set a PR in home gym organization? Save space and get even more use out of your Hydra power rack or Hydra bumper plate tree by attaching this barbell holder to your flat foot system or plate tree crossmember. Two bolts offer easy mounting, while an inner liner protects your barbell. The black powder coat offers rust resistance, and the 220lb max capacity can handle your barbell, even if you use it as a makeshift coat rack (please don't). Hardware included. Check out the Vertical Barbell Holder for an upright-mounting version.
Bells of Steel 3 Barbell Wall Rack
This nifty wall mounted barbell holder lets you store your bars horizontally on your wall. It gives your bars the center-piece flair they deserve while giving you more room for activities — ahem, exercise. HDPE plastic lining protects the knurling on your barbell for a lifetime of lifting pleasure. Not so handy? No worries! All you need to install is a level and some basic tools. We highly recommend mounting it on your wall studs or using a stringer, but wall anchors are included as well as a third option.
Bells of Steel Above Rack Barbell Holder
Store a barbell above your power rack, converting it into a useable pull-up station - for smarter storage AND a bigger back. The 3D-printed Hydra Barbell Holder Rack Attachment is made to fit perfectly on true 3" x 3" tubing with 5/8" holes but will fit smaller racks with a DIY shim. With a 500lb capacity, this versatile storage solution will hold barbells up to 32mm in diameter. Place your barbell across the power rack for a makeshift pull-up station, ideal for lifters with a Lat Pulldown attachment.
Bells of Steel Accessory Holder (Wall or Rack Mounted)
Bid a not-so-fond farewell to impossibly tangled bands, sweat-soaked support wear, and chaotically misplaced Barbell Collars . You'll never look like one of those poor, helpless saps who can't do anything right in an infomercial again. Mount it directly to your wooden wall studs, your concrete wall, or your power rack (Hydra, Manticore or 2.3”) to keep your accessories secure, out of the way, and readily accessible for your next lifting masterpiece!
Bells of Steel Wall-Mounted Plate Storage Rack
Vertical storage is like a pillar of perfection, nay, a beacon of hope, of home gym storage. While we love the rack-mountable plate pegs, we also appreciate wanting more space for attachments. The Wall Mounted Plate Storage Rack is the best of both worlds. This space-saving storage solution mounts directly to a stud or concrete wall to keep your plates tidy and secure. Four 12.6″ plate pegs and a 793lb total capacity offer plenty of space for your weight plates with 2" holes. Customize the peg spacing to show off your collection in style.
Bells of Steel Adjustable Pull-up Bar Rack Attachment
The world is your oyster with this handy-dandy rack attachment. Use it as a second pull-up bar on your power rack or add it to a pair of lever arms to unlock barbell and machine-inspired exercises at home — hip thrusts, thrusters, rows, deadlifts, you name it! The beefy 6-gauge steel promises solid construction while the different finishes offer plenty of variety. With a max capacity of 500lbs, these adjustable pull-up bars are meant to withstand heavy weights. Choose the option that suits your power rack or cable tower.
Bells of Steel Utility Horn Rack Attachment
The Utility Horn easily mounts on your rack for quick access to your Olympic weight plates , bands, or chains — whatever you need handy up to 100lbs (or 132lbs for Manticore). It keeps your stuff off the floor to give you more room to smash your goals. The cotter pin offers extra security and stability while making it easy to move around until you find the perfect spot. Plus, the black powder coating provides rust resistance.
Bells of Steel USA Home Gym Builder
From commanding Six Posts to classic Four Posts to space-saving Folding Racks, we have pre-built power racks that fit the biggest AND smallest spaces. But, no gym is complete without a quality barbell & bench. Grab an ultra-versatile multi-purpose barbell or an adjustable bench to hit every angle. And if you’re a competitive athlete, we offer specialty choices whether you compete in powerlifting, bodybuilding, or professional cheese-rolling . Plus, save big when you buy in bulk!
Bells of Steel Y Dip Bar Rack Attachment
The heavy-duty Y Dip Attachment easily mounts to your rack for dips, knee or leg lifts, and more. Perfect for blasting your chest, delts, triceps, and core! You can even get creative and use this for neutral grip pull ups and inverted rows when you're short on space or time. This rack attachment boasts a black powder coat to prevent rust and UHMW lining to protect your uprights and ensure a snug fit. The UHMW-lined Manticore version can be hung vertically on your upright for storage. Easily install and adjust the height with a simple drop pin.
Bells of Steel Residential Power Rack (2.3" x 2.3", ⅝" HOLES)
The latest version of our perfect Power Rack to complement your home gym, at an affordable price that doesn't compromise quality. It's not uncommon for a bar to cost as much as your rack. We put UHMW (AKA dense plastic) on the bottom, back and front of our j-cups to ensure fewer scuffs and damage to your bar, better protecting your hard-earned dollars. Solid steel spotter arms with a secondary steel pipe covering ensures full protection for when you miss that heavy squat. The safety arms ends also act as a second pair of j-cups, making your new rack even more useful.
Bells of Steel Globe Pull Up Bar
Raise the bar on your strength training with the last pull-up bar you'll ever need. Choose from a standard grip, neutral grip, or globe grip to keep things spicy. Target your back, biceps, forearms, and core, or just hang around to boost your grip strength and decompress your spine after heavy squats. The Globe Grip Pull Up Bar has an innovative design and rust-resistant black powder coat. With a 500lb weight capacity and sturdy steel construction, this bad boy was built to last. Choose the size that corresponds with your power rack.
Bells of Steel Rack Attached Storage Basket
Tame gym clutter with the Rack Attached Storage Basket! This isn’t your grandma’s picnic basket. It’s crafted from 14-gauge steel and built to withstand the rigors of any serious gym environment. Thanks to the rugged design, all your fitness accessories are safe inside its fortress walls. Use a couple of Utility Hooks to hang your lever belt & lifting chains from the outside of the basket for even more #spacegainz Mount it on your power rack , storage system , or wall studs. IMPORTANT : Comes standard with rack-mounting hardware for tubing with ⅝” holes.
More from Bells of Steel
Add to one order and ship it together.
Bells of Steel USA Manticore Two Post Converter Bench
Remember the bench station at the gym you grew up going to? Two posts, open front, clean and simple. This is that, but better. The two-post setup uses one pair of 60" uprights at the back and the Converter Bench’s own front foot on the other end. Front foot stabilizers keep everything locked in place with built-in bar storage for more value. Add the j-cups and spotter arms of your choice for safe solo training that the old commercial gym benches never had. It’s less expensive than the four-post setup but gives you the same dedicated bench station experience.
Bells of Steel Utility Hook
The Utility Hook is the smallest—but mightiest—gym storage solution. This solid steel s-hook easily slides into tubing holes up to 11 gauge (2.9mm thick). Organize your cable attachments along the center upright of your All-in-One Trainer . Hang lifting chains off the sides of the rear upright on your Cable Tower . Store your barbell across two hooks on a 76" wide Hydra Universal Storage System. And this is just the beginning. Beyond your gym's space restrictions, the only limit is your creativity. Don't be surprised if you get hooked .
Bells of Steel Manticore Folding Half Rack - Prebuilt (3" x 3", 1" Holes)
Gym so small it could be featured on an episode of Itty-Bitty Home Gyms? Congrats! This is the rack for you. Its 1,000-pound capacity outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist — just bolt it securely before you go trying for that new chin-up PR. The uprights measure true 3″ x 3″ which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands’ imported racks.
Bells of Steel Hydra Vertical Uprights
Looking to upgrade your Hydra Rack? Or build your own franken-rack? Maybe even upgrade your non-Bells of Steel Rack that's also true 3 x 3 inch with 5/8 inch holes?Uprights are the vertical bars that connect the crossmembers of your power rack. They're easy to install and come in different lengths and styles to suit your needs and preferencesThey add functionality to your rack by allowing you to mount rack attachments like a seal row pad, lever arms, and more.Unless otherwise indicated, uprights are sold in pairs (2 pieces) and do not include hardware.
Bells of Steel Oly Lifting Needle Bearing Bar - Women's
The B.o.S. Women's Barbell 3.0 is dollar-for-dollar the best women's weightlifting barbell you can buy. Olympic weightlifting isn't just a sport, it's an art. This requires a bar to match your skill and strength - the B.o.S. Women's Barbell 3.0 is that masterpiece. In fact, it won Garage Gym Reviews' Best Olympic Weightlifting Bar for Women in 2023! Its 25mm shaft, needle bearings, and hard chrome finish deliver a smooth spin, a lively whip, and a secure grip. And while not IWF approved, you can still use it to practice for the big stage. Looking for a multi-purpose bar instead?
Bells of Steel USA Hydra Two Post Converter Bench
Remember the bench station at the gym you grew up going to? Two posts, open front, clean and simple. This is that, but better. The two-post setup uses one pair of 60" uprights at the back and the Converter Bench’s own front foot on the other end. Front foot stabilizers keep everything locked in place. Add your choice of j-cups and spotter arms for safe solo training that the old commercial gym benches never had. It’s less expensive than the four-post setup but gives you the same dedicated bench station experience.
Bells of Steel Belt Squat Machine
Out-train back pain and upper body mobility limitations while building lower body strength. The Belt Squat Machine is space-efficient and versatile, unlocking endless exercises for your home gym at an unbeatable price. Built like a tank, this beast boasts an impressive 700lb capacity (step aside, Hip Thrust Machine ). Plus, its innovative design features commercial-grade Zerk bearings and band pegs for improving your lockout strength. Despite its beastly strength, this strength machine is a gentle giant in your gym space.
Bells of Steel Machined Iron Olympic Weight Plate Sets
Weight is weight, right? But what if I told you your sloppy, 45lb plates you got for your 16th birthday from the local big box store were lying to you? The process of casting molten hot iron into molds can be fickle. Machined iron plates are cast in a specialty casting factory with over 40 years of experience, then finished on a lathe that shaves off excessive weight from the back of the plate, followed by polishing and machining edges for an even smoother, more aesthetic plate. The machined plates have a guaranteed tolerance of +/- 1% for 45, 35, and 25 and +/- 3% for 15, 10, 5, and 2.5.
Bells of Steel Viking Press Attachment
A barbell and a rack? Everyone has that. A Viking press landmine attachment in the corner? That's a different gym... and a different kind of shoulder day. Dust off the beater bar. Drop it into a landmine , load plates, slide the attachment over the sleeve, lock the knob. You're doing the viking press exercise in under a minute, no Strongman meet required. FOUR GRIP POSITIONS. 2 neutral, 2 regular. Narrow or wide, palms in or palms forward: press the way your shoulders actually want to move.
Bells of Steel USA Utility Flat Bench Pad Spare Parts
SPARE PART: Flat Utility Bench Pad
Bells of Steel Foam Roller Storage
Wall-mounted Foam Roller Storage saves floor space, is adaptable to any foam roller length, and fits foam rollers up to 6" in diameter. Designed to work like a can dispenser of ye olden days of the 1980s, this storage system will keep your foam rollers neatly stacked and off of the floor, preventing any mishaps that set you a PR in medical bills. IMPORTANT: Mounting hardware is included. Brackets must be securely mounted to a wall stud or concrete wall for user and equipment safety.
Bells of Steel Accessory Holder (Wall or Rack Mounted)
Bid a not-so-fond farewell to impossibly tangled bands, sweat-soaked support wear, and chaotically misplaced Barbell Collars . You'll never look like one of those poor, helpless saps who can't do anything right in an infomercial again. Mount it directly to your wooden wall studs, your concrete wall, or your power rack (Hydra, Manticore or 2.3”) to keep your accessories secure, out of the way, and readily accessible for your next lifting masterpiece!