Bells of Steel Utility Shackle Rack Attachment

Need a spot to hang your punching bag but fresh out of basement space? The Utility Arm mounts right onto your power rack or wall stud, transforming it into a full-on combat zone. Or, if you're more of a lover than a fighter, it doubles as moderate barbell , weight plate and/or accessory storage to keep your gym gear within arm's reach (literally). Equipped with 1" holes & 5/8" keyholes, the Utility Arm plays nice with Manticore & Hydra rack attachments , making it a true jack-of-all-trades. And if you're worried about space, don't sweat it!

by Bells of Steel

Bid a not-so-fond farewell to impossibly tangled bands, sweat-soaked support wear, and chaotically misplaced Barbell Collars . You'll never look like one of those poor, helpless saps who can't do anything right in an infomercial again. Mount it directly to your wooden wall studs, your concrete wall, or your power rack (Hydra, Manticore or 2.3”) to keep your accessories secure, out of the way, and readily accessible for your next lifting masterpiece!

by Bells of Steel

Tame gym clutter with the Rack Attached Storage Basket! This isn’t your grandma’s picnic basket. It’s crafted from 14-gauge steel and built to withstand the rigors of any serious gym environment. Thanks to the rugged design, all your fitness accessories are safe inside its fortress walls. Use a couple of Utility Hooks to hang your lever belt & lifting chains from the outside of the basket for even more #spacegainz Mount it on your power rack , storage system , or wall studs. IMPORTANT : Comes standard with rack-mounting hardware for tubing with ⅝” holes.

by Bells of Steel

Don't compromise on safety when it comes to your training! The Safety Strap Connectors mount to your rack uprights and act as an anchor point for safety straps. Together, they offer unparalleled protection and peace of mind, gently catching a loaded barbell without sacrificing security. IMPORTANT: Select connectors that match the upright & hole size of your power rack.

by Bells of Steel

Store a barbell above your power rack, converting it into a useable pull-up station - for smarter storage AND a bigger back. The 3D-printed Hydra Barbell Holder Rack Attachment is made to fit perfectly on true 3" x 3" tubing with 5/8" holes but will fit smaller racks with a DIY shim. With a 500lb capacity, this versatile storage solution will hold barbells up to 32mm in diameter. Place your barbell across the power rack for a makeshift pull-up station, ideal for lifters with a Lat Pulldown attachment.

by Bells of Steel

The Utility Hook is the smallest—but mightiest—gym storage solution. This solid steel s-hook easily slides into tubing holes up to 11 gauge (2.9mm thick). Organize your cable attachments along the center upright of your All-in-One Trainer . Hang lifting chains off the sides of the rear upright on your Cable Tower . Store your barbell across two hooks on a 76" wide Hydra Universal Storage System. And this is just the beginning. Beyond your gym's space restrictions, the only limit is your creativity. Don't be surprised if you get hooked .

by Bells of Steel

Ready to set a PR in home gym organization? Save space and get even more use out of your power rack by attaching a Vertical Mount Barbell Holder on the front or back of your uprights. Two bolts offer easy mounting, while an inner liner protects your barbell. The black powder coat offers rust resistance, and the 220lb max capacity can handle your barbell, even if you use it as a makeshift coat rack (please don't). Choose the Vertical Mount Barbell Holder that corresponds with your power rack measurements. Hardware included.

by Bells of Steel

The world is your oyster with this handy-dandy rack attachment. Use it as a second pull-up bar on your power rack or add it to a pair of lever arms to unlock barbell and machine-inspired exercises at home — hip thrusts, thrusters, rows, deadlifts, you name it! The beefy 6-gauge steel promises solid construction while the different finishes offer plenty of variety. With a max capacity of 500lbs, these adjustable pull-up bars are meant to withstand heavy weights. Choose the option that suits your power rack or cable tower.

by Bells of Steel

Attaches to the front of your rack for all types of cable work from both top and bottom pulleys. Fits the 84.5" Light Commercial & Residential Rack . A durable build and 160lb capacity offer smooth reps, even when fully loaded. Each side boasts a fixed upper and lower pulley so you can curl, cross, and become a cable connoisseur. Throw your 1" or 2" weight plates on this cost-efficient option to get more for your space and moolah. IMPORTANT: Since there is no adjustable feature to this rack attachment, the Cable Crossover can only be operated from the top or bottom positions.

by Bells of Steel

Designed for the powerlifting purist or swolo artist who prefers to train alone, this adjustable Monolift Attachment delivers the stability, safety, and slick functionality of a full monolift setup, without eating up your rack space or wallet. The cantilever-style swing-back design improves bar clearance for squats and presses, so you can unrack and lift with zero wasted motion. Once the bar’s up, the arms swing cleanly out of the way, giving you more room to squat deep and lift heavy without smashing into hooks.

by Bells of Steel

Don't compromise on safety when it comes to your training. Safety Straps offer unparalleled protection and peace of mind, gently catching a loaded barbell without sacrificing security. Select the safeties that correspond with the depth and hole sizing of your power rack.

by Bells of Steel

Overview The Smith Machine Rack Attachment turns your existing rack — Hydra, Manticore, 84" Light Commercial, or most 2.3"–3" racks — into a smooth, guided Smith machine without stealing a single extra inch of floor space. Sneaky, right? Pick the classic built-in Smith bar, or go BYOB (Bring Your Own Barbell) and run your favorite bar inside the guided rails. You get the safety and consistency of a Smith, plus the familiar feel of the bar you already know and love. More control, more confidence, fewer "please don't let this rep be the one that takes me out" moments.

by Bells of Steel

Isolate your triceps into a set of triumphantly terrific triceps! This single tricep pulldown rope is spin-off the classic tricep rope extension, compatible with any cable machine using carabiners. The nylon ropes and hard plastic ends are durable and long-lasting. Plus, the 25mm diameter comfortable to hold, so you work your tris to failure without feeling like you're holding onto a wet spaghetti noodle. Built specifically for tricep targeting but also works great for hitting your biceps, shoulders, and core with hammer curls, facepulls, and woodchoppers.

by Bells of Steel

If Mighty Grip Plates & Dead Bounce Conflict Bumper Plates had a baby, this would be it. The Rubber Coated Iron Weight Plates feature a durable 100% virgin rubber coating that is nearly odorless, so you’ll avoid the foul smell of low-quality rubber while protecting your equipment from damage. Plus, they’ll minimize noise — in case the clangin’ & bangin’ of iron plates remind you of nails on a chalkboard (we like your shopping habits, so we’ll let this one slide). The large ergonomic handles and rubber coating improve comfort on farmer walks, back extensions, and weighted crunches.

by Bells of Steel

The four-post bench station is what you see at powerlifting meets and serious commercial gyms. It’s a dedicated bench press station, made your way when you add your favourite safeties and j-cups — and the Converter Bench makes it happen. What makes this one different from the competition is the floating bench design. The Converter Bench hangs between the specialty crossmembers with ZERO POSTS UNDERNEATH. That means you can tuck your feet back as far as you want without hitting anything. For powerlifters who rely on leg drive, this is a big deal.

by Bells of Steel

This squat stand is to home gyms what the Double Double is to Canada — simple, powerful, and a cultural phenomenon. Its 1,000-pound capacity outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist - just bolt it down before you go trying for that new chin-up PR. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks.

by Bells of Steel

Protect your floors and your gear from big lifts with easy-to-clean recycled rubber flooring. Sold in 4' x 6' sheets for maximum floor coverage (which is great, because these heavy-duty 33lb-37.5lb mats are a pain in the glutes to move). Choose between 6mm or 8mm thick to suit your space. IMPORTANT: We are unable to ship these by UPS, so if your total order is less than 500lbs, we will be unable to ship the mats to you. Sold in single sheets.

by Bells of Steel

Sculpt your arms into a set of triumphantly terrific triceps! The Tricep Pressdown with Ergo Handgrips is compatible with any cable machine using carabiners. The rubberized grips and large ends are grippy and comfortable to hold, so you work your tris to failure without feeling like you're holding onto a wet spaghetti noodle. IMPORTANT: Requires a carabiner (not included by default) for use on your cable machine.

by Bells of Steel

The Utility Horn easily mounts on your rack for quick access to your Olympic weight plates , bands, or chains — whatever you need handy up to 100lbs (or 132lbs for Manticore). It keeps your stuff off the floor to give you more room to smash your goals. The cotter pin offers extra security and stability while making it easy to move around until you find the perfect spot. Plus, the black powder coating provides rust resistance.

by Bells of Steel

Looking to upgrade your Hydra Rack? Or build your own franken-rack? Maybe even upgrade your non-Bells of Steel Rack that's also true 3 x 3 inch with 5/8 inch holes?Uprights are the vertical bars that connect the crossmembers of your power rack. They're easy to install and come in different lengths and styles to suit your needs and preferencesThey add functionality to your rack by allowing you to mount rack attachments like a seal row pad, lever arms, and more.Unless otherwise indicated, uprights are sold in pairs (2 pieces) and do not include hardware.

by Bells of Steel

Weighing in at a beefy 73lbs for maximum stability, the Squat Stands 3.0 can be used in home gyms or commercial settings, for instance, weightlifting clubs. Superior 1" spacing through the bench and pull zone and 2" spacing above and below allow you to select the perfect height for your j-cups, for precision lift-offs that can make the difference between a good rep and a superb rep. Trying to decide between squat stands and a power rack? Then check out Squat Stands vs Power Racks: How to Choose .

by Bells of Steel

Wickedly precise and boldly colored, the Competition Bumper Plates are the perfect calibrated plates for Olympic lifting. These competition bumper plates don't just look amazing, they also closely align with IWF specs and outperform all-black bumpers . While they're not IWF approved, they do check the key boxes: 450mm diameter, color-coded, and guaranteed to +/- 0.1% of the claimed weight. The galvanized center hub with its co-molded steel collar won't spin or break from the rubber and uses an innovative method to securely lock the bolts in place.

by Bells of Steel

So you think you shouldn’t lift heavier than you can hold? Pfffft . Get a GRIP. Sure, we’re all for improving your grip s trength and * ahem * getting your hands dirty, but let’s be real: your grip shouldn’t limit you from growing the LARGEST muscles in your body. The Figure 8 design provides an ultra-fast and easy setup, with durable quality made to last. Studies showed that using straps leads to greater perceived grip security and power — and there’s nothing we weightlifters more than a placebo effect. I’ll take my questionable supps shaken, not stirred, thanks.

by Bells of Steel

Overview The Bells of Steel Lat Pulldown / Low Row Machine is a heavy duty back-training beast built for lifters who want buttery-smooth cable work without sacrificing half their house of gains. With a smooth 310 lb selectorized stack or plate loaded option, adjustable thigh pads, built-in band pegs, and high/low pulley versatility, this machine delivers wide-grip lat work, heavy low rows, arm training, and cable accessory movements — big back energy without the space demands of a full functional trainer.

by Bells of Steel