Bells of Steel Safety Straps for Hydra & Manticore Racks

Don't compromise on safety when it comes to your training. Safety Straps offer unparalleled protection and peace of mind, gently catching a loaded barbell without sacrificing security. Select the safeties that correspond with the depth and hole sizing of your power rack.

by Bells of Steel

Don't compromise on safety when it comes to your training! The Safety Strap Connectors mount to your rack uprights and act as an anchor point for safety straps. Together, they offer unparalleled protection and peace of mind, gently catching a loaded barbell without sacrificing security. IMPORTANT: Select connectors that match the upright & hole size of your power rack.

by Bells of Steel

Don't compromise on safety when it comes to your training. These Flip Down Safeties offer the confidence and reliability of a spotter without the weird-feeling personal space invasion. Select the safeties that correspond with the depth and hole sizing of your power rack.

by Bells of Steel

Don't compromise on safety when it comes to your training. These Pin Pipe Safeties offer unparalleled protection and peace of mind at a reasonable cost. Select the safeties that correspond with the depth and hole sizing of your power rack.

by Bells of Steel

You may be more than a pretty face, but dropping a loaded barbell while benching certainly won’t improve things. Stay safe while benching or squatting with the heavy-duty Spotter Arms Attachment! Or use them as a secondary squat/bench station for barbell supersets! UHMW lining protects your barbell from damage, while the Manticore version boasts extra UHMW to keep your rack uprights in tip-top shape. - 60mm version: compatible with our 60mm racks and non-B.o.S. 2.3" x 2.3" racks with 5/8" holes. - Hydra version: compatible with our Hydra racks and non-B.o.S.

by Bells of Steel

Bid a not-so-fond farewell to impossibly tangled bands, sweat-soaked support wear, and chaotically misplaced Barbell Collars . You'll never look like one of those poor, helpless saps who can't do anything right in an infomercial again. Mount it directly to your wooden wall studs, your concrete wall, or your power rack (Hydra, Manticore or 2.3”) to keep your accessories secure, out of the way, and readily accessible for your next lifting masterpiece!

by Bells of Steel

The robust Sandwich J-cups are heavy-duty and a serious plus when using a safety squat bar. The beefy sandwich design, abrasion-resistant lining, and sloped backing protect your bar and you while re-racking. 60mm version: Fits our 60mm racks + cable towers & non-B.o.S. 60mm x 60mm racks with 5/8" holes. Thick HDPE padding protects your bar & features an 880lb combined capacity. Hydra version: Fits our Hydra racks & non-B.o.S. true 3" x 3" racks with 5/8" holes. Thick HDPE padding protects your bar & features a 1,000lb combined capacity.

by Bells of Steel

The world is your oyster with this handy-dandy rack attachment. Use it as a second pull-up bar on your power rack or add it to a pair of lever arms to unlock barbell and machine-inspired exercises at home — hip thrusts, thrusters, rows, deadlifts, you name it! The beefy 6-gauge steel promises solid construction while the different finishes offer plenty of variety. With a max capacity of 500lbs, these adjustable pull-up bars are meant to withstand heavy weights. Choose the option that suits your power rack or cable tower.

by Bells of Steel

Band Pegs are designed to help strengthen those sticking points and blast through plateaus. Use bands to add resistance to squats, rack pulls, benching, and more. The carabiners offer extra security if you have nightmares about bands coming unhooked and slapping you silly. Select the band pegs that match your power rack specs. Sold in pairs.

by Bells of Steel

Mounting gym equipment shouldn't feel like a DIY disaster waiting to happen. Whether it’s a heavy bag that’s too tricky to hang from high ceilings or gym rings and cable pulleys with a mind of their own, the Bells of Steel Utility Shackle Rack Attachment has you covered. Easily mount the Utility Shackle to a 3” x 3” power rack to keep your attachments secure. Or, mount it on a Utility Arm — maintaining full use of your rack while taking advantage of the often-overlooked side space.

by Bells of Steel

The heavy-duty Y Dip Attachment easily mounts to your rack for dips, knee or leg lifts, and more. Perfect for blasting your chest, delts, triceps, and core! You can even get creative and use this for neutral grip pull ups and inverted rows when you're short on space or time. This rack attachment boasts a black powder coat to prevent rust and UHMW lining to protect your uprights and ensure a snug fit. The UHMW-lined Manticore version can be hung vertically on your upright for storage. Easily install and adjust the height with a simple drop pin.

by Bells of Steel

Take your training to new angles with the Landmine Rack Attachment! This mighty rack attachment brings a whole new dimension to your strength workouts, from explosive landmine presses to rotational core work. The Standard version fits any rack with 5/8" holes (including 60mm & Hydra racks ) provided the tubing length or width is no greater than 3". It boasts a beefy 315lb capacity with a UHMW-lined sleeve to protect your favorite Olympic barbell as you squat, press, row, Viking Press, and twist to target different muscle groups for an explosive workout.

by Bells of Steel

Bid a not-so-fond farewell to impossibly tangled bands, sweat-soaked support wear, and chaotically misplaced Barbell Collars . You'll never look like one of those poor, helpless saps who can't do anything right in an infomercial again. Mount it directly to your wooden wall studs, your concrete wall, or your power rack (Hydra, Manticore or 2.3”) to keep your accessories secure, out of the way, and readily accessible for your next lifting masterpiece!

by Bells of Steel

Remember the bench station at the gym you grew up going to? Two posts, open front, clean and simple. This is that, but better. The two-post setup uses one pair of 60" uprights at the back and the Converter Bench’s own front foot on the other end. Front foot stabilizers keep everything locked in place. Add your choice of j-cups and spotter arms for safe solo training that the old commercial gym benches never had. It’s less expensive than the four-post setup but gives you the same dedicated bench station experience.

by Bells of Steel

Gym so small it could be featured on an episode of Itty-Bitty Home Gyms? Congrats! This is the rack for you. Its 1,000-pound capacity outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist — just bolt it securely before you go trying for that new chin-up PR. The uprights measure true 3″ x 3″ which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands’ imported racks.

by Bells of Steel

Wickedly precise and boldly colored, the Competition Bumper Plates are the perfect calibrated plates for Olympic lifting. These competition bumper plates don't just look amazing, they also closely align with IWF specs and outperform all-black bumpers . While they're not IWF approved, they do check the key boxes: 450mm diameter, color-coded, and guaranteed to +/- 0.1% of the claimed weight. The galvanized center hub with its co-molded steel collar won't spin or break from the rubber and uses an innovative method to securely lock the bolts in place.

by Bells of Steel

We married two Cable Towers together using a Bare Steel Pull-Up Bar to create a joyous union for your home gym. And just like that, a multi-use cable tower/squat stand station was born! Add a set of J-Cups , and you’re ready to squat! Or bench. Or anything else, really. Olympic Weight Plate loadable sleeves keep costs low and possibilities high, while the 210-pound Weight Stack version is the crème de la crème of convenience. Dual Nylon Adjustable Handles on the upright with 30+ height settings create... 30, carry the 1...endless possibilities!

by Bells of Steel

If Mighty Grip Plates & Dead Bounce Conflict Bumper Plates had a baby, this would be it. The Rubber Coated Iron Weight Plates feature a durable 100% virgin rubber coating that is nearly odorless, so you’ll avoid the foul smell of low-quality rubber while protecting your equipment from damage. Plus, they’ll minimize noise — in case the clangin’ & bangin’ of iron plates remind you of nails on a chalkboard (we like your shopping habits, so we’ll let this one slide). The large ergonomic handles and rubber coating improve comfort on farmer walks, back extensions, and weighted crunches.

by Bells of Steel

The four-post bench station is what you see at powerlifting meets and serious commercial gyms. It’s a dedicated bench press station, made your way when you add your favourite safeties and j-cups — and the Converter Bench makes it happen. What makes this one different from the competition is the floating bench design. The Converter Bench hangs between the specialty crossmembers with ZERO POSTS UNDERNEATH. That means you can tuck your feet back as far as you want without hitting anything. For powerlifters who rely on leg drive, this is a big deal.

by Bells of Steel

So you think you shouldn’t lift heavier than you can hold? Pfffft . Get a GRIP. Sure, we’re all for improving your grip s trength and * ahem * getting your hands dirty, but let’s be real: your grip shouldn’t limit you from growing the LARGEST muscles in your body. The Figure 8 design provides an ultra-fast and easy setup, with durable quality made to last. Studies showed that using straps leads to greater perceived grip security and power — and there’s nothing we weightlifters more than a placebo effect. I’ll take my questionable supps shaken, not stirred, thanks.

by Bells of Steel

Broaden the weight range of your adjustable kettlebell to 9-11.5kg! This plastic bottom shell weighs just 0.7kg (1.5lb), making your empty Adjustable Kettlebell as light as 9kg (19.6lb). That's 3kg less than an empty full-steel version! Access the 9.5-11.5kg (20-25lb) increments using your kettlebell plates. The lighter range is great for single-arm exercises or beginners who don't want to shell out the money for a lighter kettlebell . Weight increments: - 9kg (empty) - 9.5kg - 10kg - 10.5kg - 11kg - 11.5kg IMPORTANT: Warranty is void if dropped.

by Bells of Steel

Your college days might be over, but it's not too late to do another keg stand train like a varsity athlete. Its 1,000-pound capacity outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks. By matching the same tubing specs as many of our American competitors, you can mix and match attachments freely without needing to stick to one brand - hello, open ecosystem!

by Bells of Steel

Take your strength training further with the Nuobell 50 to 80-pound Expansion Kit! When 50 pounds no longer challenges you, this kit efficiently upgrades your existing Nuobell set to a powerful 80 pounds per dumbbell. This comprehensive kit includes all the necessary weights and a longer cradle, pre-assembled to smoothly transition your Nuobell set from 50 to 80 pounds—saving you the expense and space of acquiring a whole new set. Download Nuobell 50 to 80 LB Expansion Kit - Standard (Chrome) Product…

by Bells of Steel

Adjustable jump rope with a 10' max length and ergonomic handles so you can crush your cardio and plyo training. Includes two cable types and a convenient storage bag so you can double under your way to cardio dominance.

by Bells of Steel