Bells of Steel Dead Bounce Conflict Bumper Plates

It's time to bump up your lifting game! These non-smelly, DB (dead bounce) virgin rubber bumper plates have a thick stainless steel insert ring with 3 anchor points to prevent common bumper breakdowns. The number one advantage of bumpers is safety for the lifter. A lifter who hesitates to dump a barbell because they're afraid of damage to the floor or the equipment is more likely to get hurt. Bumpers take any worry about damage completely out of the equation.

by Bells of Steel

It's time to bump up your lifting game! These medium-bounce rubber bumper plates have a thick stainless steel insert ring with 3 anchor points to prevent common bumper breakdowns. The number one advantage of bumpers is safety for the lifter. A lifter who hesitates to dump a bad lift because they're afraid of damage to the floor or the equipment is more likely to get hurt. Bumpers take any worry about damage completely out of the equation.

by Bells of Steel

It's time to bump up your lifting game! These medium-bounce rubber bumper plates have a thick stainless steel insert ring with 3 anchor points to prevent common bumper breakdowns. The number one advantage of bumpers is safety for the lifter. A lifter who hesitates to dump a bad lift because they're afraid of damage to the floor or the equipment is more likely to get hurt. Bumpers take any worry about damage completely out of the equation.

by Bells of Steel

If Mighty Grip Plates & Dead Bounce Conflict Bumper Plates had a baby, this would be it. The Rubber Coated Iron Weight Plates feature a durable 100% virgin rubber coating that is nearly odorless, so you’ll avoid the foul smell of low-quality rubber while protecting your equipment from damage. Plus, they’ll minimize noise — in case the clangin’ & bangin’ of iron plates remind you of nails on a chalkboard (we like your shopping habits, so we’ll let this one slide). The large ergonomic handles and rubber coating improve comfort on farmer walks, back extensions, and weighted crunches.

by Bells of Steel

If Mighty Grip Plates & Dead Bounce Conflict Bumper Plates had a baby, this would be it. The Rubber Coated Iron Weight Plates feature a durable 100% virgin rubber coating that is nearly odorless, so you’ll avoid the foul smell of low-quality rubber while protecting your equipment from damage. Plus, they’ll minimize noise — in case the clangin’ & bangin’ of iron plates remind you of nails on a chalkboard (we like your shopping habits, so we’ll let this one slide). The large ergonomic handles and rubber coating improve comfort on farmer walks, back extensions, and weighted crunches.

by Bells of Steel

Wickedly precise and boldly colored, the Competition Bumper Plates are the perfect calibrated plates for Olympic lifting. These competition bumper plates don't just look amazing, they also closely align with IWF specs and outperform all-black bumpers . While they're not IWF approved, they do check the key boxes: 450mm diameter, color-coded, and guaranteed to +/- 0.1% of the claimed weight. The galvanized center hub with its co-molded steel collar won't spin or break from the rubber and uses an innovative method to securely lock the bolts in place.

by Bells of Steel

Wickedly precise and boldly colored, the Competition Bumper Plates are the perfect calibrated plates for Olympic lifting. These competition bumper plates don't just look amazing, they also closely align with IWF specs and outperform all-black bumpers . While they're not IWF approved, they do check the key boxes: 450mm diameter, color-coded, and guaranteed to +/- 0.1% of the claimed weight. The galvanized center hub with its co-molded steel collar won't spin or break from the rubber and uses an innovative method to securely lock the bolts in place.

by Bells of Steel

Wickedly precise and boldly colored, the Competition Bumper Plates are the perfect calibrated plates for Olympic lifting. These competition bumper plates don't just look amazing, they also closely align with IWF specs and outperform all-black bumpers . While they're not IWF approved, they do check the key boxes: 450mm diameter, color-coded, and guaranteed to -0.05%/+0.1% of the claimed weight. The galvanized center hub with its co-molded steel collar won't spin or break from the rubber and uses an innovative method to securely lock the bolts in place.

by Bells of Steel

Set a strong foundation for strength with Technique Bumper Plates. These weight plates are the same size as their heavier big brothers, so your barbell height stays consistent whether you're warming up or learning the snatch (good luck). Your form stays flawless, and you stay injury-free—unless you trip over your own feet, but we can't help with that. Technique plates are perfect for beginners who are learning the ropes—or the bars. No more trying to guestimate your starting position with an empty bar or tiny 5lb plates.

by Bells of Steel

Heavy-duty drop pads absorb impact, reduce noise, and protect your floors and weights during lifts.

by Bells of Steel

Tired of playing plate Jenga in your home gym? The Residential Bumper Plate Tree is your budget-friendly solution to weight plate chaos, handling up to 858lbs of weight without the higher price tag of commercial-grade options. Crafted from 14-gauge steel with a 57lb weight, this unit is sturdy enough for most lifters, while the rubber feet keep your floors safe from battle scars. Plus, the four welded bar holders mean your barbells can finally stop napping on the floor.

by Bells of Steel

Our Weightlifting Platforms bring together shock absorption, protection, and undeniable style, complete with bamboo centers that scream classy lifter energy in 8 unique configurations. Whether you’re tight on space or rocking a full pain cave, there’s a setup for you: Three-Layer Platforms (Three Layer 4 Square & 3 Square): Designed for lifters who go big and drop harder. The triple-layer base fits Deadlift Pads for unmatched noise and momentum absorption. Single-Layer Platforms (12, 9, 8, 6, 4 & 3 Square): Rubber-backed, bamboo-centered, and ready for action.

by Bells of Steel

Experience pain-free mobility and floor exercises on hard basement or garage gym floors. 2.5" of plush, cushy foam with a non-slip surface make your uncomfortable workouts as comfortable as possible (Burpees not included-those just suck). When you're done, use the convenient transport handles to fold it and tuck it away. Or keep it under your desk at work for naps. Not that we do that here, Kaevon...

by Bells of Steel

Replacement monitor for the Blitz Bike & Residential Blitz Bike .

by Bells of Steel

The Utility Hook is the smallest—but mightiest—gym storage solution. This solid steel s-hook easily slides into tubing holes up to 11 gauge (2.9mm thick). Organize your cable attachments along the center upright of your All-in-One Trainer . Hang lifting chains off the sides of the rear upright on your Cable Tower . Store your barbell across two hooks on a 76" wide Hydra Universal Storage System. And this is just the beginning. Beyond your gym's space restrictions, the only limit is your creativity. Don't be surprised if you get hooked .

by Bells of Steel

Sculpt your arms into a set of triumphantly terrific triceps! The Tricep Pressdown with Ergo Handgrips is compatible with any cable machine using carabiners. The rubberized grips and large ends are grippy and comfortable to hold, so you work your tris to failure without feeling like you're holding onto a wet spaghetti noodle. IMPORTANT: Requires a carabiner (not included by default) for use on your cable machine.

by Bells of Steel

It's time to bump up your lifting game. These crumb bumper plates have a thick stainless steel insert ring with 3 anchor points to prevent common bumper breakdowns. The crumb material is quieter than urethane bumpers. Ideal for lifters who don't have a platform and features coloured flecks for easier weight identification. The number one advantage of bumpers is safety for the lifter. A lifter who hesitates to dump a bad lift because they're afraid of damage to the floor or the equipment is more likely to get hurt. Bumpers take any worry about damage completely out of the equation.

by Bells of Steel

Most ab wheels wobble, flex, and occasionally remind you what your carpet tastes like. The ABsyidyan Stainless Steel Ab Roller is built on a simple idea: your ab wheel shouldn’t be the weakest thing in your gym. STAINLESS STEEL SHAFT. EXTRA-WIDE DUAL WHEEL. 500+ LB CAPACITY. No plastic axles. No wobbly single wheels. Just a rock-solid roller that keeps up when things get hard. The extra-wide dual wheel gives you a stable base on any surface—hardwood, rubber, tile, or carpet—while the non-slip tread keeps you tracking straight.

by Bells of Steel

With the Kettlebell Rack, you can display your kettlebells with the tender love and appreciation they deserve. Each rack boasts a 500lb capacity for a beefy 1,000lb total. You'll be hard-pressed (or snatched, or cleaned, or swung) to overload this baby. While designed to hold competition kettlebells , you can also use it for rubber hex dumbells or powder-coated kettlebells . Just be careful that round gear doesn't merrily roll away! Designed with space in mind, this compact rack will restore order to the lawless wasteland that is your home gym. There's a new sheriff in town. Ye-freaking-haw!

by Bells of Steel

We married two Cable Towers together using a Bare Steel Pull-Up Bar to create a joyous union for your home gym. And just like that, a multi-use cable tower/squat stand station was born! Add a set of J-Cups , and you’re ready to squat! Or bench. Or anything else, really. Olympic Weight Plate loadable sleeves keep costs low and possibilities high, while the 210-pound Weight Stack version is the crème de la crème of convenience. Dual Nylon Adjustable Handles on the upright with 30+ height settings create... 30, carry the 1...endless possibilities!

by Bells of Steel

It's time to bump up your lifting game! These non-smelly, DB (dead bounce) virgin rubber bumper plates have a thick stainless steel insert ring with 3 anchor points to prevent common bumper breakdowns. The number one advantage of bumpers is safety for the lifter. A lifter who hesitates to dump a barbell because they're afraid of damage to the floor or the equipment is more likely to get hurt. Bumpers take any worry about damage completely out of the equation.

by Bells of Steel

Isolate your arms, chest & more! The Adjustable Aluminum Handles are compatible with any cable machine using carabiners and are excellent for curls, shoulder raises, chest flies, and much more. The 5.25" wide handles rotate smoothly and the aluminum coating will help keep those pesky rust fairies away. Adjust them to the perfect length using the five heavy-duty d-rings. IMPORTANT: Requires carabiners (not included by default) for use on your cable machine.

by Bells of Steel

Gym so small it could be featured on an episode of Itty-Bitty Home Gyms? Congrats! This is the rack for you. Its 1,000-pound capacity outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist — just bolt it securely before you go trying for that new chin-up PR. The uprights measure true 3″ x 3″ which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands’ imported racks.

by Bells of Steel

Sculpt your arms into a set of triumphantly terrific triceps with the Fat Bar Tricep Pressdown! Whether you’re into grappling sports, arm wrestling, or just want to build your grip strength, fat bar attachments are a game-changer. Its unique design builds your grip in ways a typical cable attachment can’t match and allows for peak tricep targeting on tricep pushdowns. Compatible with any cable machine using a carabiner. IMPORTANT: Requires a carabiner (not included by default) for use on your cable machine.

by Bells of Steel