Bells of Steel Hydra Batwing Storage

Like a mullet haircut, the 6 Post Power Rack is all business-in-the-front, party-in-the-back. Its 1,000-pound capacity outlasts heavy pull-ups, handles big bench presses and withstands you squatting a league of ancient Giants (pics or it didn't happen). As a beefed-up version of our classic 4 Post Rack , it'll store your weight plate collection and maximize your space - an organized being is an all-powerful being. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks.

by Bells of Steel

The Hydra 2-Sided Rack Builder is excellent for running highly efficient team training without taking up the floor space of a Hydra Rig. Everything that is pictured is included: 84" uprights, 30" crossmembers, 13" plate pegs and more! Additional Hydra attachments are optional. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks. By matching the same tubing specs as many of our American competitors, you can mix and match attachments freely without needing to stick to one brand - hello, open ecosystem!

by Bells of Steel

With this Half Rack, your home gym will be so optimized that they'll be calling you The Jacked Effi-cionado. Its 1,000-pound capacity outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks. By matching the same tubing specs as many of our American competitors, you can mix and match attachments freely without needing to stick to one brand - hello, open ecosystem!

by Bells of Steel

Ready to set a PR in home gym organization? Save space and get even more use out of your power rack by attaching a Vertical Mount Barbell Holder on the front or back of your uprights. Two bolts offer easy mounting, while an inner liner protects your barbell. The black powder coat offers rust resistance, and the 220lb max capacity can handle your barbell, even if you use it as a makeshift coat rack (please don't). Choose the Vertical Mount Barbell Holder that corresponds with your power rack measurements. Hardware included.

by Bells of Steel

Bid a not-so-fond farewell to impossibly tangled bands, sweat-soaked support wear, and chaotically misplaced Barbell Collars . You'll never look like one of those poor, helpless saps who can't do anything right in an infomercial again. Mount it directly to your wooden wall studs, your concrete wall, or your power rack (Hydra, Manticore or 2.3”) to keep your accessories secure, out of the way, and readily accessible for your next lifting masterpiece!

by Bells of Steel

Ready to set a PR in home gym organization? Save space and get even more use out of your Hydra power rack or Hydra bumper plate tree by attaching this barbell holder to your flat foot system or plate tree crossmember. Two bolts offer easy mounting, while an inner liner protects your barbell. The black powder coat offers rust resistance, and the 220lb max capacity can handle your barbell, even if you use it as a makeshift coat rack (please don't). Hardware included. Check out the Vertical Barbell Holder for an upright-mounting version.

by Bells of Steel

The 4 Post Power Rack is to home gyms, what maple syrup is to Canada: world-renowned, and the sign of impeccable taste. *chef's kiss* It outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist - just bolt it down before you go trying for that new chin-up PR. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks.

by Bells of Steel

Store a barbell above your power rack, converting it into a useable pull-up station - for smarter storage AND a bigger back. The 3D-printed Hydra Barbell Holder Rack Attachment is made to fit perfectly on true 3" x 3" tubing with 5/8" holes but will fit smaller racks with a DIY shim. With a 500lb capacity, this versatile storage solution will hold barbells up to 32mm in diameter. Place your barbell across the power rack for a makeshift pull-up station, ideal for lifters with a Lat Pulldown attachment.

by Bells of Steel

Vertical storage is like a pillar of perfection, nay, a beacon of hope, of home gym storage. While we love the rack-mountable plate pegs, we also appreciate wanting more space for attachments. The Wall Mounted Plate Storage Rack is the best of both worlds. This space-saving storage solution mounts directly to a stud or concrete wall to keep your plates tidy and secure. Four 12.6″ plate pegs and a 793lb total capacity offer plenty of space for your weight plates with 2" holes. Customize the peg spacing to show off your collection in style.

by Bells of Steel

This squat stand is to home gyms what the Double Double is to Canada — simple, powerful, and a cultural phenomenon. Its 1,000-pound capacity outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist - just bolt it down before you go trying for that new chin-up PR. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks.

by Bells of Steel

Need a spot to hang your punching bag but fresh out of basement space? The Utility Arm mounts right onto your power rack or wall stud, transforming it into a full-on combat zone. Or, if you're more of a lover than a fighter, it doubles as moderate barbell , weight plate and/or accessory storage to keep your gym gear within arm's reach (literally). Equipped with 1" holes & 5/8" keyholes, the Utility Arm plays nice with Manticore & Hydra rack attachments , making it a true jack-of-all-trades. And if you're worried about space, don't sweat it!

by Bells of Steel

These Storage Shelves are designed to handle everything from dumbbells to med balls without sacrificing floor space or durability. This versatile beast adapts as your gear (and impulse buys) grow. Each shelf holds up to 450kg (almost 1,000lbs!). Mount to your Hydra or Manticore power rack with ⅝” holes/keyholes. Choose between: Solid-bottom Dumbbell & Kettlebell Shelf – Mount flat or tilted, with an optional lip to keep your gear from bailing. Open-rail Bumper & Med Ball Shelf – Two rails, open center, built to cradle the heaviest bumpers to the tiniest B.o.S medicine balls.

by Bells of Steel

The B.o.S. Women's Barbell 3.0 is dollar-for-dollar the best women's weightlifting barbell you can buy. Olympic weightlifting isn't just a sport, it's an art. This requires a bar to match your skill and strength - the B.o.S. Women's Barbell 3.0 is that masterpiece. In fact, it won Garage Gym Reviews' Best Olympic Weightlifting Bar for Women in 2023! Its 25mm shaft, needle bearings, and hard chrome finish deliver a smooth spin, a lively whip, and a secure grip. And while not IWF approved, you can still use it to practice for the big stage. Looking for a multi-purpose bar instead?

by Bells of Steel

Remember the bench station at the gym you grew up going to? Two posts, open front, clean and simple. This is that, but better. The two-post setup uses one pair of 60" uprights at the back and the Converter Bench’s own front foot on the other end. Front foot stabilizers keep everything locked in place with built-in bar storage for more value. Add the j-cups and spotter arms of your choice for safe solo training that the old commercial gym benches never had. It’s less expensive than the four-post setup but gives you the same dedicated bench station experience.

by Bells of Steel

The four-post bench station is what you see at powerlifting meets and serious commercial gyms. It’s a dedicated bench press station, made your way when you add your favourite safeties and j-cups — and the Converter Bench makes it happen. What makes this one different from the competition is the floating bench design. The Converter Bench hangs between the specialty crossmembers with ZERO POSTS UNDERNEATH. That means you can tuck your feet back as far as you want without hitting anything. For powerlifters who rely on leg drive, this is a big deal.

by Bells of Steel

If you want bragging rights for having the nicest plates on the block, then these Urethane Change Plates are a must-have. Due to their urethane construction, colors have more "pop" to them. This makes lettering and numbers appear crisper, adding a noticeable level of professionalism that'll make others go "DAAAAAMNN!" Urethane is also a much harder material than rubber, so these urethane change plates are a huge step above the durability of rubber bumpers — even our competition bumper plates can't match their toughness.

by Bells of Steel

Bid a not-so-fond farewell to impossibly tangled bands, sweat-soaked support wear, and chaotically misplaced Barbell Collars . You'll never look like one of those poor, helpless saps who can't do anything right in an infomercial again. Mount it directly to your wooden wall studs, your concrete wall, or your power rack (Hydra, Manticore or 2.3”) to keep your accessories secure, out of the way, and readily accessible for your next lifting masterpiece!

by Bells of Steel

Weighing in at a beefy 73lbs for maximum stability, the Squat Stands 3.0 can be used in home gyms or commercial settings, for instance, weightlifting clubs. Superior 1" spacing through the bench and pull zone and 2" spacing above and below allow you to select the perfect height for your j-cups, for precision lift-offs that can make the difference between a good rep and a superb rep. Trying to decide between squat stands and a power rack? Then check out Squat Stands vs Power Racks: How to Choose .

by Bells of Steel

A replacement seat pad (smaller pad, for the butt) for the Buzzsaw Bench . Compatible with: - Buzzsaw Bench (BSAW-BEN) - Buzzsaw Bench (BLUT-BSAW2-BEN) - Buzzsaw Bench (SPU-BSAW2-BEN) - Buzzsaw Bench (BSAW2-BEN)

by Bells of Steel

Gym so small it could be featured on an episode of Itty-Bitty Home Gyms? Congrats! This is the rack for you. Its 1,000-pound capacity outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist — just bolt it securely before you go trying for that new chin-up PR. The uprights measure true 3″ x 3″ which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands’ imported racks.

by Bells of Steel

It's time to bump up your lifting game. These crumb bumper plates have a thick stainless steel insert ring with 3 anchor points to prevent common bumper breakdowns. The crumb material is quieter than urethane bumpers. Ideal for lifters who don't have a platform and features coloured flecks for easier weight identification. The number one advantage of bumpers is safety for the lifter. A lifter who hesitates to dump a bad lift because they're afraid of damage to the floor or the equipment is more likely to get hurt. Bumpers take any worry about damage completely out of the equation.

by Bells of Steel

Remember the bench station at the gym you grew up going to? Two posts, open front, clean and simple. This is that, but better. The two-post setup uses one pair of 60" uprights at the back and the Converter Bench’s own front foot on the other end. Front foot stabilizers keep everything locked in place. Add your choice of j-cups and spotter arms for safe solo training that the old commercial gym benches never had. It’s less expensive than the four-post setup but gives you the same dedicated bench station experience.

by Bells of Steel

Sick of bracing your feet on a skinny beam mid–lat pulldown? Enter the Footplate for Cable Towers & All In One Trainers: a simple, sturdy add-on that fixes one of the most annoying cable tower quirks. No bolts, no assembly, no fuss. Just pop it out of the box, set it in place, and once your feet are planted, it stays locked down tighter than your lifting belt on PR day. Small upgrade, BIG difference in comfort and stability. This grippy checkerboard steel plate slides right onto your Bells of Steel 2.3” x 2.3” (60mm) setup: Cable Tower , All-in-One Trainer , or Power Rack .

by Bells of Steel

Broaden the weight range of your adjustable kettlebell to 9-11.5kg! This plastic bottom shell weighs just 0.7kg (1.5lb), making your empty Adjustable Kettlebell as light as 9kg (19.6lb). That's 3kg less than an empty full-steel version! Access the 9.5-11.5kg (20-25lb) increments using your kettlebell plates. The lighter range is great for single-arm exercises or beginners who don't want to shell out the money for a lighter kettlebell . Weight increments: - 9kg (empty) - 9.5kg - 10kg - 10.5kg - 11kg - 11.5kg IMPORTANT: Warranty is void if dropped.

by Bells of Steel