Hardwick's Hardware Doorknob Half Spindle ~ Wide Size

Vintage-style Hardware Traditional-style Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 5/16" (8 mm) thick square shaft in center (measured on the flats) Straight rigid-style spindle Product Description Specs An old-style threaded spindle rod for doorknobs. Made of solid steel, this spindle is sturdy & durable. This particular spindle has a size of 3/8" - 20 threads per inch (TPI), but has a little extra thicker square size (5/16"). Excellent for your reproduction doorknobs, or just a replacement for your old chewed-up spindles.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style 2-1/2" overall length Standard 20 TPI thread Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Straight split-style spindle Product Description Specs An old-style threaded split spindle rod for doorknobs. It is designed for when a single doorknob is installed on one side of the door. Made of solid steel, this spindle is sturdy & durable.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style 2-1/4" overall length Standard 20 TPI thread Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Straight split-style spindle Product Description Specs An old-style threaded split spindle rod for doorknobs. It is designed for when a single doorknob is installed on one side of the door. Made of solid steel, this spindle is sturdy & durable.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Coarse 16 TPI thread Made of solid steel 3/8" size from point to point on rod - Coarse 16 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Straight split-style spindle Product Description Specs An old-style threaded split spindle with three threaded holes for threaded doorknobs, or old doorknobs with square holes . It is designed for when a single doorknob is installed on one side of the door. Made of solid steel, this spindle is sturdy & durable.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Swivel-style spindle Product Description Specs An old-style threaded swivel spindle rod for doorknobs that use a privacy (locking) mechanism. Made of solid steel, this spindle is sturdy & durable. This particular spindle has a size of 3/8" - 20 threads per inch (TPI), which is a standard & common size for many doorknobs.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style - D esigned for non-turning doorknobs Common 20 TPI thread 1" overall length - See here for the longer length Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Includes four flat-head philips screws Sold as two dummy spindles in bag Product Description Specs An old-style threaded spindle rod for dummy doorknobs. Designed specifically for doorknobs where a non-turning doorknob is desired, such as pantry doors, closet doors, folding doors, & French doors.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style - Designed for non-turning doorknobs Coarse 16 TPI thread 1-1/4" overall length Made of solid steel 3/8" size from point to point on rod - Coarse 16 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Includes four flat-head philips screws Sold as two dummy spindles in bag Product Description Specs An old-style threaded spindle rod for dummy doorknobs. Designed specifically for doorknobs where a non-turning doorknob is desired, such as pantry doors, closet doors, folding doors, & French doors.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Threaded nut for 3/8-20 thread spindles Zinc plated steel 3/16" thickness of nut Sold as single piece Product Description Specs 3/8-20 thread h exagonal nut for optional use with doorknob spindles. Intended for use with split spindles in doors that have a knob from only one side. By tightening the nut against the door lock’s hub, it helps set the spindle in the lock. Made of zinc-plated steel. Outer diameter of nut measures 5/8". 3/16" thickness.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Designed for traditional-style doorknobs with a spindle 28 TPI x 1/4" diameter set screw 1/4" length Hex recessed head Includes a 1/8" hex key Sold as two set screws in pack Available in brass finish, oil rubbed bronze, & polished nickel finishes Product Description Specs These set screws work with traditional-style doorknobs that take threaded spindles. The thread size of the set screw is 28 TPI x 1/4" diameter width, which is a common thread size for holes on old-style door knobs. The screws are made of steel material & are sold in pairs.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Inside size: 9/32" (7 mm) Outside size: 5/16" (8 mm) Zinc plated steel 5/8" length Sold as single piece Product Description Specs Spindle sleeve (converter) allows a 9/32" (7 mm) wide door spindle to fit snugly in a 5/16" (8 mm) wide hub. Enables a firm & smooth doorknob operation. 5/8" long length. Spindle converter is made of steel material, & is zinc plated; sold as a single piece. Hardwick & Sons is pleased to offer vintage-style hardware for the many people who desire to fashion their homes with charm, quality, & style.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Thumb turn is made of solid brass Solid steel 2-1/2" long threaded rod Common 20 TPI thread 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Includes two flat-head slotted screws Product Description Specs An old-style spindle rod with a solid brass thumbturn & small rosette. This piece is excellent for closet, pantry, or smaller doors. The shaft is made of solid steel, making the spindle is sturdy & durable.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Thumb turn is made of solid brass Solid steel 3" long threaded rod Common 20 TPI thread 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Includes two flat-head slotted screws Product Description Specs An old-style spindle rod with a solid brass thumbturn & small rosette. This piece is excellent for closet, pantry, or smaller doors. The shaft is made of solid steel, making the spindle is sturdy & durable.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional & classic Made of genuine glass Attractive "Black" colored glass Non-lacquered brass finish on brass base (will patina naturally over time) Includes a 8-32 thread machine truss-head screw which allows for invisible rear mounting Product Description Specs This turn-of-century reproduction glass knob has an exquisite & charming star-shaped design fitting for period cabinets & furniture. The glass is carefully set into a handsome brass base with a threaded shank in the back.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Alfa Tools Crimped Wire Wheel 2" diameter wheel Coarse 1/4" shank - 1" length 0.012" Wire Diameter 6000 RPM max Product Description Specs Alfa Tools 2" Coarse Wire Wheel - 1/4" Shank. 0 .012" Wire Diameter. 6000 RPM max. All-steel construction. Applications include deburring, blending, removal of rust, scale, dirt, & finish preparation prior to painting or plating. Made by Alfa Tools. Made in Spain.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Model No. L30BBK Includes 4 woodburning tips: All-Purpose Tip, Script Point, Shading Point, & Dot Point Includes 4 branding tips: Square Point, Circle Point, Diamond Point, & Triangle Point Pen develops point temperatures up to 1050 ° F that burns wood faster & darker - Especially good for harder woods like Cherry & Walnut Includes small metal tool stand & box for tool storage 30 watts Product Description Specs Pen develops point temperatures up to 1050°F that burns wood faster & darker.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Aladdin Mantle Lamp Company Model N186-3N Plated nickel finish Heelless gallery style Includes Nite Light Product Description Specs Aladdin Nickel Electric Burner with Lox-On Gallery & Nite Light. Heelless gallery style. N186-3N. Includes Nite Light. Product Model # Aladdin Nickel Electric Burner with Nite Light N186-3N For California Residents: WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

White painted finish on steel material 5/8" radius corners 4" x 4" size hinge Button tip Removable pin Includes flat head screws Sold as three hinges in pack Product Description Specs Three 4 " White Painted Door Hinges with 5/8" radius corners & a removable pin. White color finish on steel material. Countersunk holes. Includes flat head screws. 4" x 4" door hinge size. Five knuckle, full mortise design. Ultra Hardware No. 61756.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Classic & original shirt 100% spun soft cotton Adult male fit Available in S, M, L, XL, & XXL Product Description Specs The classic & iconic "I Got Hammered at Hardwick's" T-shirt. The shirt is made of heavyweight 100% spun soft cotton & the shirt color is in a nice ash gray color with jet black lettering print. Double needle sleeves & hem for durability. A customer favorite!

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Weller Model No. SP15N 15W medium duty soldering iron kit Maximum tip temperature of 750° F Great for a variety of projects: Electronics, small appliances, lawn & garden projects 15 watts Product Description Specs Weller 15W Medium Duty Soldering Iron Kit. Kit includes S5 2mm tip & stand. Made by Weller - Apex Tool Group.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Un-opened package - New Stock Norton - Model 87944 Made in USA 3 sharpening stones included in kit: Medium grit, Fine grit, Very Fine grit 6" x 2" x 5/16" size sharpening stones Includes sharpening base Product Description Specs Norton Angle-Rite Sharpener - 3 Stone Sharpening Kit with base. Made in USA. Product Norton Angle-Rite Sharpener - 3 Stone Sharpening…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Model LS087 Forged & tempered 5/8" width of square end 3/4" width of leaf end 9-1/2" overall length Product Description Specs These Marshalltown QLT Ornamental Tools are forged & tempered. This small tool has a trowel end & square end that are used to detail foam shapes & unusual wall surfaces. Ideal for working in small areas . Product Overall Length Square End Width Leaf End Width Model # Marshalltown Small Tool Leaf & 5/8" Square 9-1/2" 5/8" 3/4"…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Model No. 8071 Great for reaching hard to get at screws #1 & #2 Phillips - 1/4" & 3/8" slotted bits Blades are made of machined, ground & hardened tool steel Drive rotation can be reversed instantly 4" overall length Knurled bits allow screws to be finger tightened Product Description Specs This is a Ratcheting Screwdriver with #1, #2 Phillips & 1/4", 3/8" slotted bits & a pass-through handle is ideal for use where screws are concealed or obstructed, leverage is required, or where turning space is limited.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan Small-sized chisel set good for fine detail woodwork 3/16" small gouge 1/4" large gouge 3/16" bent V parting tool 1/2" straight skew chisel 7/16" straight chisel 7/16" bent straight chisel Product Description Specs A good & basic Japanese-made 6-piece set of palm handle chisels. They are great for fine detail carving woodwork. Six of the most basic & useful chisel styles are included in this set, & the half-round palm-style handles are made of hardwood. Made in Japan.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Model No. 714 Made of durable engineering plastic 3" ruler for measuring screw lengths Product Description Specs This handy screw thread gage quickly identifies thread pitch, tap size & drill bit size for machine & wood screws, self tapping screws, bolts & common rivets & cotter pins up to 5/16" (8 mm). Made in USA.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho