Hardwick's Hardware Split Doorknob Spindle with Threaded Holes ~ Coarse Thread

Vintage-style Hardware Traditional-style 2-1/4" overall length Standard 20 TPI thread Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Straight split-style spindle Product Description Specs An old-style threaded split spindle rod for doorknobs. It is designed for when a single doorknob is installed on one side of the door. Made of solid steel, this spindle is sturdy & durable.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style 2-1/2" overall length Standard 20 TPI thread Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Straight split-style spindle Product Description Specs An old-style threaded split spindle rod for doorknobs. It is designed for when a single doorknob is installed on one side of the door. Made of solid steel, this spindle is sturdy & durable.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Straight rigid-style spindle Product Description Specs An old-style threaded spindle rod for doorknobs. Made of solid steel, this spindle is sturdy & durable. This particular spindle has a size of 3/8" - 20 threads per inch (TPI), which is a standard & common size for many doorknobs. Excellent for your reproduction doorknobs, or just a replacement for your old chewed-up spindles. Available in several lengths.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Straight half-length spindle Product Description Specs An old-style threaded half spindle rod for doorknobs. Designed for mortise locks or rim locks where only one doorknob is used. It is secured by a screw at the end of the spindle. Made of solid steel, this spindle is sturdy & durable. This particular spindle has a size of 3/8"-20 threads per inch (TPI), which is a standard & common size for many doorknobs.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 5/16" (8 mm) thick square shaft in center (measured on the flats) Swivel-style spindle Product Description Specs An old-style threaded swivel spindle rod for doorknobs that use a privacy (locking) mechanism. Made of solid steel, this spindle is sturdy & durable. This particular spindle has a size of 3/8" - 20 threads per inch (TPI), but has a little extra thicker square size (5/16").

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style - Designed for non-turning doorknobs Coarse 16 TPI thread 1-1/4" overall length Made of solid steel 3/8" size from point to point on rod - Coarse 16 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Includes four flat-head philips screws Sold as two dummy spindles in bag Product Description Specs An old-style threaded spindle rod for dummy doorknobs. Designed specifically for doorknobs where a non-turning doorknob is desired, such as pantry doors, closet doors, folding doors, & French doors.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style - D esigned for non-turning doorknobs Common 20 TPI thread 1" overall length - See here for the longer length Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Includes four flat-head philips screws Sold as two dummy spindles in bag Product Description Specs An old-style threaded spindle rod for dummy doorknobs. Designed specifically for doorknobs where a non-turning doorknob is desired, such as pantry doors, closet doors, folding doors, & French doors.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Threaded nut for 3/8-20 thread spindles Zinc plated steel 3/16" thickness of nut Sold as single piece Product Description Specs 3/8-20 thread h exagonal nut for optional use with doorknob spindles. Intended for use with split spindles in doors that have a knob from only one side. By tightening the nut against the door lock’s hub, it helps set the spindle in the lock. Made of zinc-plated steel. Outer diameter of nut measures 5/8". 3/16" thickness.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Designed for traditional-style doorknobs with a spindle 28 TPI x 1/4" diameter set screw 1/4" length Hex recessed head Includes a 1/8" hex key Sold as two set screws in pack Available in brass finish, oil rubbed bronze, & polished nickel finishes Product Description Specs These set screws work with traditional-style doorknobs that take threaded spindles. The thread size of the set screw is 28 TPI x 1/4" diameter width, which is a common thread size for holes on old-style door knobs. The screws are made of steel material & are sold in pairs.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Thumb turn is made of solid brass Solid steel 3" long threaded rod Common 20 TPI thread 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Includes two flat-head slotted screws Product Description Specs An old-style spindle rod with a solid brass thumbturn & small rosette. This piece is excellent for closet, pantry, or smaller doors. The shaft is made of solid steel, making the spindle is sturdy & durable.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Thumb turn is made of solid brass Solid steel 2-1/2" long threaded rod Common 20 TPI thread 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Includes two flat-head slotted screws Product Description Specs An old-style spindle rod with a solid brass thumbturn & small rosette. This piece is excellent for closet, pantry, or smaller doors. The shaft is made of solid steel, making the spindle is sturdy & durable.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Classic & Traditional Timeline Style: Timeless classic style - Late 19th century, Early 20th century up to Modern style interiors Heavy solid brass core doorknob Classic smooth old-style design 2-1/4" diameter knob Spindle hole in brass base is threaded 3/8" - 20 TPI Doorknob includes one set-screw Available in unlacquered brass (will patina naturally), oil rubbed bronze, brushed nickel, lacquered brass, & polished nickel finishes Product Description Specs A high quality solid brass single doorknob with a classic & smooth design.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Model No. 714 Made of durable engineering plastic 3" ruler for measuring screw lengths Product Description Specs This handy screw thread gage quickly identifies thread pitch, tap size & drill bit size for machine & wood screws, self tapping screws, bolts & common rivets & cotter pins up to 5/16" (8 mm). Made in USA.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Precision 7/16" size swivel pounce wheel Designed for perforating, dotting, imprinting, tracing, quilting, embossing, overstiching, etc. Body made of Aluminum Product Description Specs Excel 7/16" Swivel Pounce Wheel. Great for tracing, pattern making, marking, quilting, sewing, wooden working & other transferring applications. Made by Excel Blades. Made in USA.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Model No. 16651 Vermont American #8 Hinge Bit Self-Centering Drill & Driver Accurately centers pilot holes & drives screws without re-chucking Product Description Specs Vermont American #8 Hinge Bit. Self-Centering Drill & Driver. Accurately centers pilot holes & drives screws without re-chucking. Made in USA.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

8" length size 7/8" width Zinc-plated steel material Countersunk holes Product Description Specs These flat mending plate irons are designed for furniture, cabinets, shelving support, etc. Allows for quick & easy repair of items in the workshop, home, & other applications. Made of steel material with a zinc plated finish. Countersunk holes. 8" long size. Screws not included.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan Made of Aogami No. 2 high carbon steel "Blue Carbon Steel" 6 piece set Wooden handles Includes tool roll Product Description Specs These Japanese carving knives are used for marking, trimming, carving & shaping woodworking & bamboo. 6 PC set. Includes a tool roll for storage. Made by Ikeuchi Hamono. Made in Japan. Hardwick & Sons is pleased to offer quality tools from Japan for the many people who desire special & well-crafted tools.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Number "5" house number Made of solid brass material - Lacquered finish 4" size 1/4" thickness Includes two flat head phillips screws Product Description Specs Number Five Solid Brass House Number in a 4" Size. M ade of solid brass material - 1/4" thickness . Lacquered brass finish . Includes two flat head phillips screws. #5 House Number. Hy-Ko Model No. BR-90/5.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

All steel tri-square 9" size Beams & blades are precision ground Hardened blade Product Description Specs Alfa Tools 9" Solid Steel Square. Made from high quality tool steel. Squares have true right angle inside & outside. Beams & blades are precision ground. Blade is hardened. Length of the blade is measured from inner edge of the beam to the end of the blade. All steel tri square. Made by Alfa Tools.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made of cast iron 3-1/2" reach 8" length Black enamel finish Product Description Specs A cast iron holdfast with an 11/16″ diameter post & a reach of 3-1/2″. Use a mallet & a vertical blow to lock material tight against the bench surface. Sideways blows will “unlock”. Designed for holding work in place on benchtops & made of cast iron with a black enamel finish.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Thexton Part No. 356 Un-opened package Product Description Specs Thexton Cooling System Flush Tool. Thexton Manufacturing Company, Minneapolis MINN. Product Thexton Cooling System Flush…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

20 oz head weight Drop Forged Steel Head Head made in Japan - Handle made with American Hickory Mill Face - Rip Hammer 15-1/2" overall length Hickory hardwood handle Product Description Specs A Japanese 20 oz Mill Face Rip Hammer with Hickory Handle . Mill waffle face. 15-1/2" overall length. Head made in Japan. Handle made from American Hickory. Mill waffle face.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Model No. L30BBK Includes 4 woodburning tips: All-Purpose Tip, Script Point, Shading Point, & Dot Point Includes 4 branding tips: Square Point, Circle Point, Diamond Point, & Triangle Point Pen develops point temperatures up to 1050 ° F that burns wood faster & darker - Especially good for harder woods like Cherry & Walnut Includes small metal tool stand & box for tool storage 30 watts Product Description Specs Pen develops point temperatures up to 1050°F that burns wood faster & darker.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

3M Model 62093H1-DC Designed for use for mold remediation, sanding/scraping lead based paint in accordance with local government regulations or guidance Product Description Specs This 3M Demolition & Renovation Respirator is for u se for particulates during sawing, sanding, & grinding. Balanced design for more comfort. Can be used for sanding and scraping of lead-based paint in certain projects. NIOSH (National Institute for Occupational Safety and Health) approved: P100. Replacement filter cartridge available . NIOSH approved: Organic vapor/acid gas/P-100.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho