Hardwick's Hardware Split Doorknob Spindle ~ Standard Thread - 2-1/2" Long

Vintage-style Hardware Traditional-style 2-1/4" overall length Standard 20 TPI thread Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Straight split-style spindle Product Description Specs An old-style threaded split spindle rod for doorknobs. It is designed for when a single doorknob is installed on one side of the door. Made of solid steel, this spindle is sturdy & durable.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Straight rigid-style spindle Product Description Specs An old-style threaded spindle rod for doorknobs. Made of solid steel, this spindle is sturdy & durable. This particular spindle has a size of 3/8" - 20 threads per inch (TPI), which is a standard & common size for many doorknobs. Excellent for your reproduction doorknobs, or just a replacement for your old chewed-up spindles. Available in several lengths.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Coarse 16 TPI thread Made of solid steel 3/8" size from point to point on rod - Coarse 16 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Straight split-style spindle Product Description Specs An old-style threaded split spindle with three threaded holes for threaded doorknobs, or old doorknobs with square holes . It is designed for when a single doorknob is installed on one side of the door. Made of solid steel, this spindle is sturdy & durable.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Straight half-length spindle Product Description Specs An old-style threaded half spindle rod for doorknobs. Designed for mortise locks or rim locks where only one doorknob is used. It is secured by a screw at the end of the spindle. Made of solid steel, this spindle is sturdy & durable. This particular spindle has a size of 3/8"-20 threads per inch (TPI), which is a standard & common size for many doorknobs.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 5/16" (8 mm) thick square shaft in center (measured on the flats) Swivel-style spindle Product Description Specs An old-style threaded swivel spindle rod for doorknobs that use a privacy (locking) mechanism. Made of solid steel, this spindle is sturdy & durable. This particular spindle has a size of 3/8" - 20 threads per inch (TPI), but has a little extra thicker square size (5/16").

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style - D esigned for non-turning doorknobs Common 20 TPI thread 1" overall length - See here for the longer length Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Includes four flat-head philips screws Sold as two dummy spindles in bag Product Description Specs An old-style threaded spindle rod for dummy doorknobs. Designed specifically for doorknobs where a non-turning doorknob is desired, such as pantry doors, closet doors, folding doors, & French doors.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style - Designed for non-turning doorknobs Coarse 16 TPI thread 1-1/4" overall length Made of solid steel 3/8" size from point to point on rod - Coarse 16 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Includes four flat-head philips screws Sold as two dummy spindles in bag Product Description Specs An old-style threaded spindle rod for dummy doorknobs. Designed specifically for doorknobs where a non-turning doorknob is desired, such as pantry doors, closet doors, folding doors, & French doors.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Thumb turn is made of solid brass Solid steel 2-1/2" long threaded rod Common 20 TPI thread 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Includes two flat-head slotted screws Product Description Specs An old-style spindle rod with a solid brass thumbturn & small rosette. This piece is excellent for closet, pantry, or smaller doors. The shaft is made of solid steel, making the spindle is sturdy & durable.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Thumb turn is made of solid brass Solid steel 3" long threaded rod Common 20 TPI thread 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Includes two flat-head slotted screws Product Description Specs An old-style spindle rod with a solid brass thumbturn & small rosette. This piece is excellent for closet, pantry, or smaller doors. The shaft is made of solid steel, making the spindle is sturdy & durable.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Threaded nut for 3/8-20 thread spindles Zinc plated steel 3/16" thickness of nut Sold as single piece Product Description Specs 3/8-20 thread h exagonal nut for optional use with doorknob spindles. Intended for use with split spindles in doors that have a knob from only one side. By tightening the nut against the door lock’s hub, it helps set the spindle in the lock. Made of zinc-plated steel. Outer diameter of nut measures 5/8". 3/16" thickness.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Designed for traditional-style doorknobs with a spindle 28 TPI x 1/4" diameter set screw 1/4" length Hex recessed head Includes a 1/8" hex key Sold as two set screws in pack Available in brass finish, oil rubbed bronze, & polished nickel finishes Product Description Specs These set screws work with traditional-style doorknobs that take threaded spindles. The thread size of the set screw is 28 TPI x 1/4" diameter width, which is a common thread size for holes on old-style door knobs. The screws are made of steel material & are sold in pairs.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Classic & Traditional Timeline Style: Timeless classic style - Late 19th century, Early 20th century up to Modern style interiors Heavy solid brass core doorknob Classic smooth old-style design Set includes two knobs with spindle 2-1/4" diameter knob Will fit doors with a thickness of 1" to 2-1/2" Set includes a 4" long, 3/8" - 20 TPI spindle, two set-screws along with a hex key for fastening knobs to spindle Available in unlacquered brass (will patina naturally), oil rubbed bronze, brushed nickel, lacquered brass, & polished nickel finishes Product…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Un-opened package - New Stock Norton - Model 87944 Made in USA 3 sharpening stones included in kit: Medium grit, Fine grit, Very Fine grit 6" x 2" x 5/16" size sharpening stones Includes sharpening base Product Description Specs Norton Angle-Rite Sharpener - 3 Stone Sharpening Kit with base. Made in USA. Product Norton Angle-Rite Sharpener - 3 Stone Sharpening…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Model No. 520202 - Unused old stock - small amount of rust on shank 1/4" Core Box 2" Overall Length 1/4" shank Product Description Specs Irwin Carbide 1/4" Core Box Router Bit - Made in USA. Carbide - High Grade Steel construction Router Bit. 2" overall length. 1/4" shank. Irwin Blue Diamond Model No. 520202. Made in USA. Product Model # Irwin Carbide 1/4" Core Box Router Bit - Made in USA…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Number "6" house number Made of die-cast aluminum material - Black hammered look 3-1/2" size Includes two small nails Product Description Specs Number Six Black Hammered House Number in a 3-1/2" Size. M ade of die-cast aluminum material with a black hammered style . Mounting nails included. #6 House Number. Hy-Ko Model No. DC-3/6.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Milwaukee 1/2" Socket Adapter to 1/4" Hex 2" overall length Sold as one bit in pack Product Description Specs Milwaukee 1/2" Socket Adapter to 1/4" Ball Hex. Insert Bit - 2" Long. Shockwave Bit. Made by Milwaukee Tool. Product Title Overall Length Model # Milwaukee 1/2" Socket Adapter to 1/4" Hex 2"…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Curved Pruning Saw with Rubber Grip - Versatile coarse saw designed for green woods Crosscut Teeth: 6 TPI - Coarse Cut 20-1/2" overall length 13" Blade Length Plastic & rubberized handle Includes hard plastic sheath Product Description Specs This Large Curved Pruning Saw with Rubber Grip cuts medium to large branches with an ergonomically designed, rubberized, non-slip grip handle. The teeth on the saw have 6 TPI which allows for very fast aggressive cutting. Versatile large coarse garden outdoor saw designed for green woods. Includes hard plastic sheath for storage.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Model LS087 Forged & tempered 5/8" width of square end 3/4" width of leaf end 9-1/2" overall length Product Description Specs These Marshalltown QLT Ornamental Tools are forged & tempered. This small tool has a trowel end & square end that are used to detail foam shapes & unusual wall surfaces. Ideal for working in small areas . Product Overall Length Square End Width Leaf End Width Model # Marshalltown Small Tool Leaf & 5/8" Square 9-1/2" 5/8" 3/4"…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Classic & original shirt 100% spun soft cotton Adult male fit Available in S, M, L, XL, & XXL Product Description Specs The classic & iconic "I Got Hammered at Hardwick's" T-shirt. The shirt is made of heavyweight 100% spun soft cotton & the shirt color is in a nice ash gray color with jet black lettering print. Double needle sleeves & hem for durability. A customer favorite!

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Zinc-plated steel #6 size Available as singles, or in a bulk box Product Description Specs #6 washer in zinc-plated steel material. Available as singles, or in a bulk box of 100 pcs. Hardwick & Sons is pleased to offer vintage-style hardware for the many people who desire to fashion their homes with charm, quality, & style. The traditional-style hardware that we showcase are true & faithful reproductions of classic hardware pieces found in the many homes from across America throughout the past century.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

General Tools Model 138T Taper design for the removal of faucet seats Hardened alloy steel Fits most faucet seats Zinc plated to prevent rust Product Description Specs This General Tools Tapered Faucet Seat Wrench 138T is ideal for professional or DIY plumbing . Taper design for the removal of faucet seats. Hardened alloy steel. Fits most faucet seats. Zinc plated to prevent rust.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Adjustable Frame Accepts 10" & 12" Hacksaw Blades 16" overall length Two Cutting Positions & 3-1/2" Cutting Depth Product Description Specs An Adjustable Frame Hacksaw is ideal for cutting glass, ceramic tile, hardened steel or bone, & variety of other materials at home or on a job site. It has two cutting positions & 3-1/2" cutting depth. Accepts 10" & 12" hacksaw blades.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

11" overall length Angled chisel on one end for prying Nail puller on the other end Product Description Specs A basic small length mini c rowbar. Pull, pry & straighten, with an angled chisel on one end for prying & lifting, & the other end of crow bar is slotted for pulling nails. A "seconds" crow bar prybar.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Model No. 15-106A Excellent for cutting intricate patterns & irregular shapes High-grade carbon hardened & tempered blade provides clean, controlled cutting action 6-1/2" cutting depth - 360 º blade pivot at 45º increments Nickel-plated steel frame & cushion handle Cuts wood, plastic, light metal & wallboard Product Description Specs This FatMax Coping Saw has a high-grade carbon hardened & tempered blade & an ergonomically-designed cushion grip handle.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho