Hardwick's Hardware Split Doorknob Spindle ~ Standard Thread - 2-1/4" Long

Vintage-style Hardware Traditional-style 2-1/2" overall length Standard 20 TPI thread Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Straight split-style spindle Product Description Specs An old-style threaded split spindle rod for doorknobs. It is designed for when a single doorknob is installed on one side of the door. Made of solid steel, this spindle is sturdy & durable.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Straight rigid-style spindle Product Description Specs An old-style threaded spindle rod for doorknobs. Made of solid steel, this spindle is sturdy & durable. This particular spindle has a size of 3/8" - 20 threads per inch (TPI), which is a standard & common size for many doorknobs. Excellent for your reproduction doorknobs, or just a replacement for your old chewed-up spindles. Available in several lengths.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Coarse 16 TPI thread Made of solid steel 3/8" size from point to point on rod - Coarse 16 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Straight split-style spindle Product Description Specs An old-style threaded split spindle with three threaded holes for threaded doorknobs, or old doorknobs with square holes . It is designed for when a single doorknob is installed on one side of the door. Made of solid steel, this spindle is sturdy & durable.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Straight half-length spindle Product Description Specs An old-style threaded half spindle rod for doorknobs. Designed for mortise locks or rim locks where only one doorknob is used. It is secured by a screw at the end of the spindle. Made of solid steel, this spindle is sturdy & durable. This particular spindle has a size of 3/8"-20 threads per inch (TPI), which is a standard & common size for many doorknobs.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 5/16" (8 mm) thick square shaft in center (measured on the flats) Swivel-style spindle Product Description Specs An old-style threaded swivel spindle rod for doorknobs that use a privacy (locking) mechanism. Made of solid steel, this spindle is sturdy & durable. This particular spindle has a size of 3/8" - 20 threads per inch (TPI), but has a little extra thicker square size (5/16").

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style - D esigned for non-turning doorknobs Common 20 TPI thread 1" overall length - See here for the longer length Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Includes four flat-head philips screws Sold as two dummy spindles in bag Product Description Specs An old-style threaded spindle rod for dummy doorknobs. Designed specifically for doorknobs where a non-turning doorknob is desired, such as pantry doors, closet doors, folding doors, & French doors.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style - Designed for non-turning doorknobs Coarse 16 TPI thread 1-1/4" overall length Made of solid steel 3/8" size from point to point on rod - Coarse 16 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Includes four flat-head philips screws Sold as two dummy spindles in bag Product Description Specs An old-style threaded spindle rod for dummy doorknobs. Designed specifically for doorknobs where a non-turning doorknob is desired, such as pantry doors, closet doors, folding doors, & French doors.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Thumb turn is made of solid brass Solid steel 2-1/2" long threaded rod Common 20 TPI thread 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Includes two flat-head slotted screws Product Description Specs An old-style spindle rod with a solid brass thumbturn & small rosette. This piece is excellent for closet, pantry, or smaller doors. The shaft is made of solid steel, making the spindle is sturdy & durable.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Thumb turn is made of solid brass Solid steel 3" long threaded rod Common 20 TPI thread 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Includes two flat-head slotted screws Product Description Specs An old-style spindle rod with a solid brass thumbturn & small rosette. This piece is excellent for closet, pantry, or smaller doors. The shaft is made of solid steel, making the spindle is sturdy & durable.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Threaded nut for 3/8-20 thread spindles Zinc plated steel 3/16" thickness of nut Sold as single piece Product Description Specs 3/8-20 thread h exagonal nut for optional use with doorknob spindles. Intended for use with split spindles in doors that have a knob from only one side. By tightening the nut against the door lock’s hub, it helps set the spindle in the lock. Made of zinc-plated steel. Outer diameter of nut measures 5/8". 3/16" thickness.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Designed for traditional-style doorknobs with a spindle 28 TPI x 1/4" diameter set screw 1/4" length Hex recessed head Includes a 1/8" hex key Sold as two set screws in pack Available in brass finish, oil rubbed bronze, & polished nickel finishes Product Description Specs These set screws work with traditional-style doorknobs that take threaded spindles. The thread size of the set screw is 28 TPI x 1/4" diameter width, which is a common thread size for holes on old-style door knobs. The screws are made of steel material & are sold in pairs.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Classic & Traditional Timeline Style: Timeless classic style - Late 19th century, Early 20th century up to Modern style interiors Heavy solid brass core doorknob Classic smooth old-style design Set includes two knobs with spindle 2-1/4" diameter knob Will fit doors with a thickness of 1" to 2-1/2" Set includes a 4" long, 3/8" - 20 TPI spindle, two set-screws along with a hex key for fastening knobs to spindle Available in unlacquered brass (will patina naturally), oil rubbed bronze, brushed nickel, lacquered brass, & polished nickel finishes Product…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Klein Tools Model No. 670-6 Crank-action handle spins screws fast with one hand Special heat-treated shaft 3/16" Slotted - 6" long blade Internal flanges inside handle provide solid, twist-resistant blade anchor Premium chrome-plated for smooth feel & corrosion resistance Cushion-Grip handle for greater torque & comfort Product Description Specs Save time & effort, especially on long-threaded screws in switch plates, light fixtures, etc. with Klein's "Rapi-Driv" screwdriver. Crank-action gets the job done fast with less fatigue.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Sheffield, England Crown Tools Model No. 1763 3/8" (10 mm) cutting edge H ot forged from the finest Carbon steel & hardened ready for use L eather shock absorbing washer Steel ferrule around handle-end for use with chisel mallets Varnished Beechwood handle Product Description Specs 3 /8" (10 mm) Mortise Chisel made by Crown Tools . This chisel has a stiff thick blade for clearing out wood waste & has wide side edges that help keep the chisel square when working in the mortise. The mortice chisel has a leather disc shock absorber to help absorb mallet blows.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Channellock Model 414 13-1/2" Size Parrot Jaws are self-gripping and ideal for use on round surfaces 2" Jaw Capacity Permalock fastener eliminates nut & bolt failure with increased joint strength Laser-hardened teeth for superior grip & longevity Forged high carbon U.S. steel for maximum strength and durability is specially coated for ultimate rust prevention Undercut tongue & groove won't slip Vinyl blue comfort grips Product Description Specs This Channellock 13-1/2" Nutbuster Tongue & Groove Plier has a special parrot nose & double tongue & groove…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Wera Model "334/6" | 105650 6 piece slotted & phillips screwdriver set Multi-component Kraftform handle for fast & ergonomic screwdriving Hexagonal anti-roll feature against rolling away Lasertip tips for more secure fit in the screw head Set Includes: Phillips Screwdriver #1 x 80 mm (Wera model 350PH Screwdriver) Phillips Screwdriver #2 x 100 mm (Wera model 350PH Screwdriver) Slotted Screwdriver 1.2 x 6.5 x 150 mm (Wera model 334PH Screwdriver) Slotted Screwdriver 0.5 x 3 x 80 mm (Wera model 335PH Screwdriver) Slotted Screwdriver 0.8 x 4 x 100 mm (Wera model 335PH…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Switzerland Model D02 - Fren Green Swiss Multi-Tool Knife 3 -3/4" closed length 440 stainless polished blade Includes 75 mm blade, blade lock, reamer/punch, sewing awl, cork screw, #1 phillips screwdriver, tweezers Product Description Specs Swiza D02 Fern Green Swiss Multi-Tool Knife. 3-3/4" closed length. Includes 75 mm blade, blade lock, reamer/punch, sewing awl, cork screw, #1 phillips screwdriver, tweezers. Swiss Army Style Knife. Made in Switzerland. From the Manufacturer: Swiza - Made in Jura, Switzerland.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Channellock Model 440 12" size Straight Jaw Tongue & Groove Pliers provide a strong, versatile grip for use in both directions 2.25" Jaw Capacity Permalock fastener eliminates nut & bolt failure with increased joint strength 90° laser-hardened teeth for superior grip & longevity Forged high carbon U.S.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Klein Tools Model D2000-9ST Heavy Duty - C uts ACSR, screws, nails & most hardened wire I ronworker's Pliers twist & cut soft annealed rebar tie wire H igh-leverage design; rivet is closer to the cutting edge for 46-Percent greater cutting & gripping power than other plier designs P recision-hardened plier head I nduction hardened cutting knives for long life Heavy-duty knurled jaws 9-1/4" overall length H ot-riveted joint ensures smooth action & no handle wobble Hook bend handle & spring-loaded action for self-opening Product Description Specs Klein…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Channellock Model GL10 9-1/2" size Special design & ergonomic offset head accommodates many shapes with greater leverage Patented "Safe-T-Stop" feature prevents finger pinch 1.25" Jaw Capacity Permalock fastener eliminates nut & bolt failure with increased joint strength Forged high carbon U.S. steel for maximum strength and durability is specially coated for ultimate rust prevention Vinyl blue comfort grips Product Description Specs This Channellock 9-1/2" Tongue & Groove "GripLock" Plier has an ergonomically designed offset head that provides more leverage.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Channellock Model 442 12" size V-Jaws for more points of contact on round stock and tubing 2.25" Jaw Capacity Permalock fastener eliminates nut & bolt failure with increased joint strength 90° laser-hardened teeth for superior grip & longevity Forged high carbon U.S. steel for maximum strength and durability is specially coated for ultimate rust prevention Undercut tongue & groove won't slip Vinyl blue comfort grips Product Description Specs This Channellock 12" V-Jaw Tongue & Groove Plier has a unique v jaw design that creates more points of contact on round…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Sheffield, England Crown Tools Model No. 1764 1/2" (12 mm) cutting edge H ot forged from the finest Carbon steel & hardened ready for use L eather shock absorbing washer Steel ferrule around handle-end for use with chisel mallets Varnished Beechwood handle Product Description Specs 1 /2" (12 mm) Mortise Chisel made by Crown Tools . This chisel has a stiff thick blade for clearing out wood waste & has wide side edges that help keep the chisel square when working in the mortise. The mortice chisel has a leather disc shock absorber to help absorb mallet blows.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan 3-piece set - SAE Drop-forged chrome vanadium Wrenches included: 3/8" x 7/16", 1/2" x 9/16", 5/8" x 11/16" Designed to grip all six sides of a nut Great for brake line nuts & fittings Product Description Specs This Japanese-made 3-piece SAE flare nut wrench set offers a size range from 3/8" to 11/16" . A regular wrench can only grip onto two sides of a nut, but flare nut wrenches are designed to grip all six sides of a nut. Great for use on hex nuts made of softer materials. Great for brake line nuts & fittings.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Model No. 3242 Provides extra leverage when positioning steel members & aligning bolt holes 30" overall length - 3/4" hex thickness Hex bars are made of hardened steel for durability & long life Forged fit-up bar is pointed on one end Chisel-end is at a 15° angle to give greater leverage Product Description Specs K lein Tools Hex Connecting Bars are designed so they provide extra-leverage when positioning steel members & aligning bolt holes. Hex bars are made of hardened steel for durability & long life. The chisel-end is at a 15° angle to give greater leverage.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho