Hardwick's Hardware Spindle Sleeve Converter - 5/8" Long

Vintage-style Hardware Traditional-style Inside size: 9/32" (7 mm) Outside size: 5/16" (8 mm) Zinc plated steel Sold in pairs Product Description Specs Spindle sleeves (converters) allows a 9/32" (7 mm) wide door spindle to fit snugly in a 5/16" (8 mm) wide hub. Enables a firm & smooth doorknob operation. Made of steel material, & is zinc plated; sold in pairs. Hardwick & Sons is pleased to offer vintage-style hardware for the many people who desire to fashion their homes with charm, quality, & style.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 5/16" (8 mm) thick square shaft in center (measured on the flats) Straight half-length spindle Product Description Specs An old-style threaded half spindle rod for doorknobs. Designed for mortise locks or rim locks where only one doorknob is used. It is secured by a screw at the end of the spindle. Made of solid steel, this spindle is sturdy & durable.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 5/16" (8 mm) thick square shaft in center (measured on the flats) Swivel-style spindle Product Description Specs An old-style threaded swivel spindle rod for doorknobs that use a privacy (locking) mechanism. Made of solid steel, this spindle is sturdy & durable. This particular spindle has a size of 3/8" - 20 threads per inch (TPI), but has a little extra thicker square size (5/16").

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Coarse 16 TPI thread Made of solid steel 3/8" size from point to point on rod - Coarse 16 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Straight split-style spindle Product Description Specs An old-style threaded split spindle with three threaded holes for threaded doorknobs, or old doorknobs with square holes . It is designed for when a single doorknob is installed on one side of the door. Made of solid steel, this spindle is sturdy & durable.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Threaded nut for 3/8-20 thread spindles Zinc plated steel 3/16" thickness of nut Sold as single piece Product Description Specs 3/8-20 thread h exagonal nut for optional use with doorknob spindles. Intended for use with split spindles in doors that have a knob from only one side. By tightening the nut against the door lock’s hub, it helps set the spindle in the lock. Made of zinc-plated steel. Outer diameter of nut measures 5/8". 3/16" thickness.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Straight rigid-style spindle Product Description Specs An old-style threaded spindle rod for doorknobs. Made of solid steel, this spindle is sturdy & durable. This particular spindle has a size of 3/8" - 20 threads per inch (TPI), which is a standard & common size for many doorknobs. Excellent for your reproduction doorknobs, or just a replacement for your old chewed-up spindles. Available in several lengths.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style 2-1/2" overall length Standard 20 TPI thread Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Straight split-style spindle Product Description Specs An old-style threaded split spindle rod for doorknobs. It is designed for when a single doorknob is installed on one side of the door. Made of solid steel, this spindle is sturdy & durable.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style 2-1/4" overall length Standard 20 TPI thread Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Straight split-style spindle Product Description Specs An old-style threaded split spindle rod for doorknobs. It is designed for when a single doorknob is installed on one side of the door. Made of solid steel, this spindle is sturdy & durable.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style - D esigned for non-turning doorknobs Common 20 TPI thread 1" overall length - See here for the longer length Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Includes four flat-head philips screws Sold as two dummy spindles in bag Product Description Specs An old-style threaded spindle rod for dummy doorknobs. Designed specifically for doorknobs where a non-turning doorknob is desired, such as pantry doors, closet doors, folding doors, & French doors.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Adapter ring to increase the diameter of the base of a doorknob from 5/8" to 23/32" (just below 3/4"), or to reduce the diameter of the doorknob ring from 3/4" to 5/8" Made of solid brass Product Description Specs A solid brass a dapter ring to increase the diameter of the base of a doorknob from 5/8" to 23/32" (just below 3/4"), or to reduce the diameter of the door knob ring from 3/4" to 5/8". This ring fits at the base of doorknobs & is used for installing them in wider door roses.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style - Designed for non-turning doorknobs Coarse 16 TPI thread 1-1/4" overall length Made of solid steel 3/8" size from point to point on rod - Coarse 16 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Includes four flat-head philips screws Sold as two dummy spindles in bag Product Description Specs An old-style threaded spindle rod for dummy doorknobs. Designed specifically for doorknobs where a non-turning doorknob is desired, such as pantry doors, closet doors, folding doors, & French doors.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Designed for traditional-style doorknobs with a spindle 28 TPI x 1/4" diameter set screw 1/4" length Hex recessed head Includes a 1/8" hex key Sold as two set screws in pack Available in brass finish, oil rubbed bronze, & polished nickel finishes Product Description Specs These set screws work with traditional-style doorknobs that take threaded spindles. The thread size of the set screw is 28 TPI x 1/4" diameter width, which is a common thread size for holes on old-style door knobs. The screws are made of steel material & are sold in pairs.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Alfa Tools Crimped Wire Wheel 2" diameter wheel Coarse 1/4" shank - 1" length 0.012" Wire Diameter 6000 RPM max Product Description Specs Alfa Tools 2" Coarse Wire Wheel - 1/4" Shank. 0 .012" Wire Diameter. 6000 RPM max. All-steel construction. Applications include deburring, blending, removal of rust, scale, dirt, & finish preparation prior to painting or plating. Made by Alfa Tools. Made in Spain.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

All steel tri-square 9" size Beams & blades are precision ground Hardened blade Product Description Specs Alfa Tools 9" Solid Steel Square. Made from high quality tool steel. Squares have true right angle inside & outside. Beams & blades are precision ground. Blade is hardened. Length of the blade is measured from inner edge of the beam to the end of the blade. All steel tri square. Made by Alfa Tools.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Model No. 520202 - Unused old stock - small amount of rust on shank 1/4" Core Box 2" Overall Length 1/4" shank Product Description Specs Irwin Carbide 1/4" Core Box Router Bit - Made in USA. Carbide - High Grade Steel construction Router Bit. 2" overall length. 1/4" shank. Irwin Blue Diamond Model No. 520202. Made in USA. Product Model # Irwin Carbide 1/4" Core Box Router Bit - Made in USA…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

20 oz head weight Drop Forged Steel Head Head made in Japan - Handle made with American Hickory Mill Face - Rip Hammer 15-1/2" overall length Hickory hardwood handle Product Description Specs A Japanese 20 oz Mill Face Rip Hammer with Hickory Handle . Mill waffle face. 15-1/2" overall length. Head made in Japan. Handle made from American Hickory. Mill waffle face.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Model No. 8071 Great for reaching hard to get at screws #1 & #2 Phillips - 1/4" & 3/8" slotted bits Blades are made of machined, ground & hardened tool steel Drive rotation can be reversed instantly 4" overall length Knurled bits allow screws to be finger tightened Product Description Specs This is a Ratcheting Screwdriver with #1, #2 Phillips & 1/4", 3/8" slotted bits & a pass-through handle is ideal for use where screws are concealed or obstructed, leverage is required, or where turning space is limited.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Model S-389-4 - Display floor model - Un-used - Last one For finding centers & truing layout lines Product Description Specs General Tools Wiggler & Center Finder Set. For finding centers & truing layout lines. For locating true vertical center lines of rounds. For holding dial indicators. For set-ups where locations are to be made ground or machine surfaces. Model S-389-4.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Precision 7/16" size swivel pounce wheel Designed for perforating, dotting, imprinting, tracing, quilting, embossing, overstiching, etc. Body made of Aluminum Product Description Specs Excel 7/16" Swivel Pounce Wheel. Great for tracing, pattern making, marking, quilting, sewing, wooden working & other transferring applications. Made by Excel Blades. Made in USA.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA D esigned to remove broken studs, bolts, socket screws & fittings Un-used old stock Large EX-10 size Aggressive left hand spiral design for extra gripping power Product Description Specs Irwin Spiral Flute Screw Extractor - L arge EX-10 size . Remove broken bolts & screws with these spiral shaft extractors. Irwin Hanson EX-10 Spiral Flute Screw Extractor - Made in USA. Made in USA.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Trewax Heavy-Duty Floor Stripper Wax Stripper for vinyl, stone, & tile floors 32 fl oz container Product Description Specs Trewax's no scrub formula is a combination of emulsifiers that quickly and easily penetrate and lift all brands of floor finishes for easy pick up with a mop or wet vacuum. Safe for any surface except wood. Easy-to-use without any offensive odors. Covers approximately 640 sq ft, depending on how porous the flooring is and how many coats of wax need removed. Concentrated. 32 fl oz.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Palm Wood blank 6" x 3/4" x 3/4" size Wooden blank for pen wood turning Sold as single piece Product Description Specs Palm Wood Blank . 6" length x 3/4" height x 3/4" width size. Pen turning blank. Exotic Wood Blank. Wood grain & color shade may vary from wood blank to wood blank. No exchanges based on wood grain & color.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Classic & original shirt 100% spun soft cotton Adult male fit Available in S, M, L, XL, & XXL Product Description Specs The classic & iconic "I Got Hammered at Hardwick's" T-shirt. The shirt is made of heavyweight 100% spun soft cotton & the shirt color is in a nice ash gray color with jet black lettering print. Double needle sleeves & hem for durability. A customer favorite!

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Weller Model No. SP15N 15W medium duty soldering iron kit Maximum tip temperature of 750° F Great for a variety of projects: Electronics, small appliances, lawn & garden projects 15 watts Product Description Specs Weller 15W Medium Duty Soldering Iron Kit. Kit includes S5 2mm tip & stand. Made by Weller - Apex Tool Group.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho