Hardwick's Hardware Spindle Sleeve Converters - One Pair

Vintage-style Hardware Traditional-style Inside size: 9/32" (7 mm) Outside size: 5/16" (8 mm) Zinc plated steel 5/8" length Sold as single piece Product Description Specs Spindle sleeve (converter) allows a 9/32" (7 mm) wide door spindle to fit snugly in a 5/16" (8 mm) wide hub. Enables a firm & smooth doorknob operation. 5/8" long length. Spindle converter is made of steel material, & is zinc plated; sold as a single piece. Hardwick & Sons is pleased to offer vintage-style hardware for the many people who desire to fashion their homes with charm, quality, & style.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 5/16" (8 mm) thick square shaft in center (measured on the flats) Straight half-length spindle Product Description Specs An old-style threaded half spindle rod for doorknobs. Designed for mortise locks or rim locks where only one doorknob is used. It is secured by a screw at the end of the spindle. Made of solid steel, this spindle is sturdy & durable.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 5/16" (8 mm) thick square shaft in center (measured on the flats) Swivel-style spindle Product Description Specs An old-style threaded swivel spindle rod for doorknobs that use a privacy (locking) mechanism. Made of solid steel, this spindle is sturdy & durable. This particular spindle has a size of 3/8" - 20 threads per inch (TPI), but has a little extra thicker square size (5/16").

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Coarse 16 TPI thread Made of solid steel 3/8" size from point to point on rod - Coarse 16 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Straight split-style spindle Product Description Specs An old-style threaded split spindle with three threaded holes for threaded doorknobs, or old doorknobs with square holes . It is designed for when a single doorknob is installed on one side of the door. Made of solid steel, this spindle is sturdy & durable.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Threaded nut for 3/8-20 thread spindles Zinc plated steel 3/16" thickness of nut Sold as single piece Product Description Specs 3/8-20 thread h exagonal nut for optional use with doorknob spindles. Intended for use with split spindles in doors that have a knob from only one side. By tightening the nut against the door lock’s hub, it helps set the spindle in the lock. Made of zinc-plated steel. Outer diameter of nut measures 5/8". 3/16" thickness.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Designed for traditional-style doorknobs with a spindle 28 TPI x 1/4" diameter set screw 1/4" length Hex recessed head Includes a 1/8" hex key Sold as two set screws in pack Available in brass finish, oil rubbed bronze, & polished nickel finishes Product Description Specs These set screws work with traditional-style doorknobs that take threaded spindles. The thread size of the set screw is 28 TPI x 1/4" diameter width, which is a common thread size for holes on old-style door knobs. The screws are made of steel material & are sold in pairs.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style - D esigned for non-turning doorknobs Common 20 TPI thread 1-1/2" overall length - See here for the shorter length Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Includes four flat-head philips screws Sold as two dummy spindles in bag Product Description Specs An old-style threaded spindle rod for dummy doorknobs. Designed specifically for doorknobs where a non-turning doorknob is desired, such as pantry doors, closet doors, folding doors, & French doors.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Straight rigid-style spindle Product Description Specs An old-style threaded spindle rod for doorknobs. Made of solid steel, this spindle is sturdy & durable. This particular spindle has a size of 3/8" - 20 threads per inch (TPI), which is a standard & common size for many doorknobs. Excellent for your reproduction doorknobs, or just a replacement for your old chewed-up spindles. Available in several lengths.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style 2-1/4" overall length Standard 20 TPI thread Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Straight split-style spindle Product Description Specs An old-style threaded split spindle rod for doorknobs. It is designed for when a single doorknob is installed on one side of the door. Made of solid steel, this spindle is sturdy & durable.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style - D esigned for non-turning doorknobs Common 20 TPI thread 1" overall length - See here for the longer length Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Includes four flat-head philips screws Sold as two dummy spindles in bag Product Description Specs An old-style threaded spindle rod for dummy doorknobs. Designed specifically for doorknobs where a non-turning doorknob is desired, such as pantry doors, closet doors, folding doors, & French doors.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style - Designed for non-turning doorknobs Coarse 16 TPI thread 1-1/4" overall length Made of solid steel 3/8" size from point to point on rod - Coarse 16 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Includes four flat-head philips screws Sold as two dummy spindles in bag Product Description Specs An old-style threaded spindle rod for dummy doorknobs. Designed specifically for doorknobs where a non-turning doorknob is desired, such as pantry doors, closet doors, folding doors, & French doors.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Standard size 1/8" hex allen key 2-3/8" long Great for tightening loose doorknobs Info Specs A very useful 1/8" allen key for hex head set-screws. Great for tightening the set-screws on classic doorknobs to spindles. A handy little wrench to have around for your loose door knobs. Hardwick & Sons is pleased to offer vintage-style hardware for the many people who desire to fashion their homes with charm, quality, & style.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Zinc-plated steel #6 size Available as singles, or in a bulk box Product Description Specs #6 washer in zinc-plated steel material. Available as singles, or in a bulk box of 100 pcs. Hardwick & Sons is pleased to offer vintage-style hardware for the many people who desire to fashion their homes with charm, quality, & style. The traditional-style hardware that we showcase are true & faithful reproductions of classic hardware pieces found in the many homes from across America throughout the past century.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Model No. 8071 Great for reaching hard to get at screws #1 & #2 Phillips - 1/4" & 3/8" slotted bits Blades are made of machined, ground & hardened tool steel Drive rotation can be reversed instantly 4" overall length Knurled bits allow screws to be finger tightened Product Description Specs This is a Ratcheting Screwdriver with #1, #2 Phillips & 1/4", 3/8" slotted bits & a pass-through handle is ideal for use where screws are concealed or obstructed, leverage is required, or where turning space is limited.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Used - good condition PEC Telescoping Gage ~ 1-1/4" to 2-1/8" Range Product Description Specs PEC Telescoping Gage ~ 1-1/4" to 2-1/8" Range. Product PEC Telescoping Gage ~ 1-1/4" to 2-1/8"…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan Olfa Model No. KB4-F/5 Great for intricate cuts on delicate materials 5 blades in pack Japanese premium carbon tool steel 8 mm wide cutting edge Designed for Olfa AK-4 knife & AK-1 knife Product Description Specs These Olfa KB4-F/5 Precision Straight Art Blades are great for making precise, sharp cuts. It's perfect for trimming & deburring plastics, wood, films, narrow cuts & crosscuts. Made from high-quality carbon tool steel, this art blade is perfect for the OLFA Cushion Grip Precision Art Knife (AK-4) & the AK-1/5B Graphic Art Knife. Made in Japan.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Model No. 803 Made of brass-plated steel Universal Fit: Attaches easily to all metal squares Sold as 2 in pack Product Description Specs Stair gages assure fast & uniform layout in repetitive work including angle cuts on rafters & stair stringers . A handy tool that improves the quality of repetitive work. Clamps & attaches easily to all metal squares.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Alfa Tools Crimped Wire Wheel 2" diameter wheel Coarse 1/4" shank - 1" length 0.012" Wire Diameter 6000 RPM max Product Description Specs Alfa Tools 2" Coarse Wire Wheel - 1/4" Shank. 0 .012" Wire Diameter. 6000 RPM max. All-steel construction. Applications include deburring, blending, removal of rust, scale, dirt, & finish preparation prior to painting or plating. Made by Alfa Tools. Made in Spain.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Model LS087 Forged & tempered 5/8" width of square end 3/4" width of leaf end 9-1/2" overall length Product Description Specs These Marshalltown QLT Ornamental Tools are forged & tempered. This small tool has a trowel end & square end that are used to detail foam shapes & unusual wall surfaces. Ideal for working in small areas . Product Overall Length Square End Width Leaf End Width Model # Marshalltown Small Tool Leaf & 5/8" Square 9-1/2" 5/8" 3/4"…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Precision 7/16" size swivel pounce wheel Designed for perforating, dotting, imprinting, tracing, quilting, embossing, overstiching, etc. Body made of Aluminum Product Description Specs Excel 7/16" Swivel Pounce Wheel. Great for tracing, pattern making, marking, quilting, sewing, wooden working & other transferring applications. Made by Excel Blades. Made in USA.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

HeliCoil M5 x 0.8 Thread Repair Kit Product Description Specs HeliCoil M5 x 0.8 Thread Repair Kit. Product Title Model # HeliCoil M5 x 0.8 Thread Repair Kit DIB-574597 |…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan 4" overall length Easy change reversible ratchet direction Flexible head 3/8" DR Chrome Vanadium Steel Product Description Specs This 4" Stubby Ratchet 3/8" Dr with Flex Head is made of C hrome Vanadium Steel. Easy change reversible ratchet direction. 4" overall length. 3/8" drive. Flexible head. Made in Japan. Hardwick & Sons is pleased to offer quality tools from Japan for the many people who desire special & well-crafted tools.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Classic & original shirt 100% spun soft cotton Adult male fit Available in S, M, L, XL, & XXL Product Description Specs The classic & iconic "I Got Hammered at Hardwick's" T-shirt. The shirt is made of heavyweight 100% spun soft cotton & the shirt color is in a nice ash gray color with jet black lettering print. Double needle sleeves & hem for durability. A customer favorite!

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Stock #542002 Product Description Specs Bora Clamp Edge Wide Track Auxiliary Clamps . Stock #542002. Product Model # Bora Clamp Edge Wide Track Auxiliary Clamps 542002 For California Residents: WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho