Hardwick's Hardware Doorknob Spindle ~ Wide Size

Vintage-style Hardware Traditional-style Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 5/16" (8 mm) thick square shaft in center (measured on the flats) Straight half-length spindle Product Description Specs An old-style threaded half spindle rod for doorknobs. Designed for mortise locks or rim locks where only one doorknob is used. It is secured by a screw at the end of the spindle. Made of solid steel, this spindle is sturdy & durable.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Swivel-style spindle Product Description Specs An old-style threaded swivel spindle rod for doorknobs that use a privacy (locking) mechanism. Made of solid steel, this spindle is sturdy & durable. This particular spindle has a size of 3/8" - 20 threads per inch (TPI), which is a standard & common size for many doorknobs.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style 2-1/4" overall length Standard 20 TPI thread Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Straight split-style spindle Product Description Specs An old-style threaded split spindle rod for doorknobs. It is designed for when a single doorknob is installed on one side of the door. Made of solid steel, this spindle is sturdy & durable.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style 2-1/2" overall length Standard 20 TPI thread Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Straight split-style spindle Product Description Specs An old-style threaded split spindle rod for doorknobs. It is designed for when a single doorknob is installed on one side of the door. Made of solid steel, this spindle is sturdy & durable.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Coarse 16 TPI thread Made of solid steel 3/8" size from point to point on rod - Coarse 16 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Straight split-style spindle Product Description Specs An old-style threaded split spindle with three threaded holes for threaded doorknobs, or old doorknobs with square holes . It is designed for when a single doorknob is installed on one side of the door. Made of solid steel, this spindle is sturdy & durable.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style - D esigned for non-turning doorknobs Common 20 TPI thread 1" overall length - See here for the longer length Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Includes four flat-head philips screws Sold as two dummy spindles in bag Product Description Specs An old-style threaded spindle rod for dummy doorknobs. Designed specifically for doorknobs where a non-turning doorknob is desired, such as pantry doors, closet doors, folding doors, & French doors.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style - Designed for non-turning doorknobs Coarse 16 TPI thread 1-1/4" overall length Made of solid steel 3/8" size from point to point on rod - Coarse 16 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Includes four flat-head philips screws Sold as two dummy spindles in bag Product Description Specs An old-style threaded spindle rod for dummy doorknobs. Designed specifically for doorknobs where a non-turning doorknob is desired, such as pantry doors, closet doors, folding doors, & French doors.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Thumb turn is made of solid brass Solid steel 3" long threaded rod Common 20 TPI thread 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Includes two flat-head slotted screws Product Description Specs An old-style spindle rod with a solid brass thumbturn & small rosette. This piece is excellent for closet, pantry, or smaller doors. The shaft is made of solid steel, making the spindle is sturdy & durable.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Threaded nut for 3/8-20 thread spindles Zinc plated steel 3/16" thickness of nut Sold as single piece Product Description Specs 3/8-20 thread h exagonal nut for optional use with doorknob spindles. Intended for use with split spindles in doors that have a knob from only one side. By tightening the nut against the door lock’s hub, it helps set the spindle in the lock. Made of zinc-plated steel. Outer diameter of nut measures 5/8". 3/16" thickness.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Thumb turn is made of solid brass Solid steel 2-1/2" long threaded rod Common 20 TPI thread 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Includes two flat-head slotted screws Product Description Specs An old-style spindle rod with a solid brass thumbturn & small rosette. This piece is excellent for closet, pantry, or smaller doors. The shaft is made of solid steel, making the spindle is sturdy & durable.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Designed for traditional-style doorknobs with a spindle 28 TPI x 1/4" diameter set screw 1/4" length Hex recessed head Includes a 1/8" hex key Sold as two set screws in pack Available in brass finish, oil rubbed bronze, & polished nickel finishes Product Description Specs These set screws work with traditional-style doorknobs that take threaded spindles. The thread size of the set screw is 28 TPI x 1/4" diameter width, which is a common thread size for holes on old-style door knobs. The screws are made of steel material & are sold in pairs.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Works well with spindles or doorknobs with threaded holes Made of solid brass Oval-head phillips screws Sold in a four pack Product Description Specs These oval-head screws work well with doorknobs or spindles with threaded holes. The thread size is 10-24 x 3/8", which is a common thread size for spindle holes & doorknobs. The screws are made of solid brass material & are sold as 4 screws in a pack.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA D esigned to remove broken studs, bolts, socket screws & fittings Un-used old stock Large EX-10 size Aggressive left hand spiral design for extra gripping power Product Description Specs Irwin Spiral Flute Screw Extractor - L arge EX-10 size . Remove broken bolts & screws with these spiral shaft extractors. Irwin Hanson EX-10 Spiral Flute Screw Extractor - Made in USA. Made in USA.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Germany Model No. 63806129067 (1) sanding pad with no holes (1) felt polishing pad (5) pieces of 40 grit sanding sheets - no holes (5 ) pieces of 80 grit sanding sheets - no holes ( 5 ) pieces of 120 grit sanding sheets - no holes (5) pieces of 220 grit sanding sheets - no holes (5) pieces of 320 grit sanding sheets - no holes (5) pieces of 400 grit sanding sheets - no holes (5) pieces of 600 grit sanding sheets - no holes (5) pieces of 800 grit sanding sheets - no holes Product Description Specs Fein Stone Sanding & Polishing Set - 63806129067 . Made in Germany.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

When heat needs to surround - bending, soldering pipe, shrinking tubing Use with any Milwaukee Heat Gun Product Description Specs The 49-80-0292 Hook Nozzle can be used with all Milwaukee Heat Guns for bending, soldering pipe, shrinking tubing or any application where the heat needs to surround the work piece. Includes nozzle only .

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Model No. L30BBK Includes 4 woodburning tips: All-Purpose Tip, Script Point, Shading Point, & Dot Point Includes 4 branding tips: Square Point, Circle Point, Diamond Point, & Triangle Point Pen develops point temperatures up to 1050 ° F that burns wood faster & darker - Especially good for harder woods like Cherry & Walnut Includes small metal tool stand & box for tool storage 30 watts Product Description Specs Pen develops point temperatures up to 1050°F that burns wood faster & darker.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

20 oz head weight Drop Forged Steel Head Head made in Japan - Handle made with American Hickory Mill Face - Rip Hammer 15-1/2" overall length Hickory hardwood handle Product Description Specs A Japanese 20 oz Mill Face Rip Hammer with Hickory Handle . Mill waffle face. 15-1/2" overall length. Head made in Japan. Handle made from American Hickory. Mill waffle face.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Special design 100% spun soft cotton Adult male fit Available in S, M, L, XL, & XXL Product Description Specs The special & unique "Squareheads Rule at Hardwick's" T-shirt. The shirt is made of heavyweight 100% spun soft cotton & the shirt color is in an attractive rich red color with ash gray lettering print. Double needle sleeves & hem for durability. A great shirt & a great conversation starter!

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Classic & popular design Purple color with white lettering 100% spun soft cotton Adult male fit Available in M, XL, & XXL Product Description Specs The classic & ever popular "I Found My Ryoba Nokogiri at Hardwick's" T-shirt. The shirt is made of heavyweight 100% spun soft cotton & the shirt color is purple color with white lettering print. Double needle sleeves & hem for durability. A customer favorite, & a great conversation starter!

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

3M Model 62093H1-DC Designed for use for mold remediation, sanding/scraping lead based paint in accordance with local government regulations or guidance Product Description Specs This 3M Demolition & Renovation Respirator is for u se for particulates during sawing, sanding, & grinding. Balanced design for more comfort. Can be used for sanding and scraping of lead-based paint in certain projects. NIOSH (National Institute for Occupational Safety and Health) approved: P100. Replacement filter cartridge available . NIOSH approved: Organic vapor/acid gas/P-100.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Thexton Part No. 561 Thexton Universal Rear Shock Mounting Bolt Kit Un-opened package Product Description Specs Thexton Universal Rear Shock Mounting Bolt Kit. Part No. 561 . Thexton Manufacturing Company, Minneapolis MINN. Product Thexton Universal Rear Shock Mounting Bolt…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

General Tools Model 138T Taper design for the removal of faucet seats Hardened alloy steel Fits most faucet seats Zinc plated to prevent rust Product Description Specs This General Tools Tapered Faucet Seat Wrench 138T is ideal for professional or DIY plumbing . Taper design for the removal of faucet seats. Hardened alloy steel. Fits most faucet seats. Zinc plated to prevent rust.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Precision 7/16" size swivel pounce wheel Designed for perforating, dotting, imprinting, tracing, quilting, embossing, overstiching, etc. Body made of Aluminum Product Description Specs Excel 7/16" Swivel Pounce Wheel. Great for tracing, pattern making, marking, quilting, sewing, wooden working & other transferring applications. Made by Excel Blades. Made in USA.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Zinc-plated steel #6 size Available as singles, or in a bulk box Product Description Specs #6 washer in zinc-plated steel material. Available as singles, or in a bulk box of 100 pcs. Hardwick & Sons is pleased to offer vintage-style hardware for the many people who desire to fashion their homes with charm, quality, & style. The traditional-style hardware that we showcase are true & faithful reproductions of classic hardware pieces found in the many homes from across America throughout the past century.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho