Hardwick's Hardware Oval-Head Spindle Set-Screws ~ 10-24 x 3/8"

Vintage-style Hardware Designed for traditional-style doorknobs with a spindle 28 TPI x 1/4" diameter set screw 1/4" length Hex recessed head Includes a 1/8" hex key Sold as two set screws in pack Available in brass finish, oil rubbed bronze, & polished nickel finishes Product Description Specs These set screws work with traditional-style doorknobs that take threaded spindles. The thread size of the set screw is 28 TPI x 1/4" diameter width, which is a common thread size for holes on old-style door knobs. The screws are made of steel material & are sold in pairs.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Standard 20 TPI thread Three 10-24 threaded holes in spindle Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Straight split-style spindle Includes one 10-24 oval head set-screw Product Description Specs An old-style threaded split spindle with three threaded holes for threaded doorknobs, or old doorknobs with square holes. It is designed for locks where a single doorknob is installed on one side of the door.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional & classic #5 screw - 5 /8" overall length Oval head - Slotted Made of solid brass material Sold as 20 pieces in a bag Product Description Specs Solid Brass #5 x 5/8" Oval Head Slotted Wood Screws. Traditional & classic vintage-style countersunk wood screws. Available in unlacquered brass (will patina naturally), oil rubbed bronze, polished nickel, & antique brass finishes. Sold as 20 pieces in a bag.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Classic & Traditional #5 screw - 5 /8" overall length Round head - Slotted Made of solid brass material Sold as 20 pieces in a bag Product Description Specs Solid Brass #5 x 5/8" Round Head Slotted Wood Screws. Traditional & classic vintage-style wood screws. Available in unlacquered brass (will patina naturally), oil rubbed bronze, polished nickel, & antique brass finishes. Sold as 20 slot head roundhead screws in a bag.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Classic & Traditional #5 screw - 5 /8" overall length Flat head - Slotted Made of solid brass material Sold as 20 pieces in a bag Product Description Specs Solid Brass #5 x 5/8" Flat Head Slotted Wood Screws. Traditional & classic vintage-style countersunk wood screws. Available in unlacquered brass (will patina naturally), oil rubbed bronze, polished nickel, & antique brass finishes. Sold as 20 slot head screws in a bag.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 5/16" (8 mm) thick square shaft in center (measured on the flats) Straight rigid-style spindle Product Description Specs An old-style threaded spindle rod for doorknobs. Made of solid steel, this spindle is sturdy & durable. This particular spindle has a size of 3/8" - 20 threads per inch (TPI), but has a little extra thicker square size (5/16"). Excellent for your reproduction doorknobs, or just a replacement for your old chewed-up spindles.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Classic & Traditional #7 screw - 1 " overall length Flat head - Slotted Made of solid brass material Sold as 20 pieces in a bag Product Description Specs Solid Brass #7 x 1" Flat Head Slotted Wood Screws. Traditional & classic vintage-style countersunk wood screws. Available in unlacquered brass (will patina naturally), oil rubbed bronze, polished nickel, & antique brass finishes. Sold as 20 slot head screws in a bag.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Straight half-length spindle Product Description Specs An old-style threaded half spindle rod for doorknobs. Designed for mortise locks or rim locks where only one doorknob is used. It is secured by a screw at the end of the spindle. Made of solid steel, this spindle is sturdy & durable. This particular spindle has a size of 3/8"-20 threads per inch (TPI), which is a standard & common size for many doorknobs.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Thumb turn is made of solid brass Solid steel 3" long threaded rod Common 20 TPI thread 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Includes two flat-head slotted screws Product Description Specs An old-style spindle rod with a solid brass thumbturn & small rosette. This piece is excellent for closet, pantry, or smaller doors. The shaft is made of solid steel, making the spindle is sturdy & durable.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Coarse 16 TPI thread Made of solid steel 3/8" size from point to point on rod - Coarse 16 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Swivel style spindle Product Description Specs An old-style threaded spindle rod for doorknobs. Made of solid steel, this spindle is sturdy & durable. This particular spindle has a size of 3/8" - 16 threads per inch (TPI), which is a coarser size for doorknobs. Excellent for your reproduction doorknobs, or just a replacement for your old chewed-up spindles.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Thumb turn is made of solid brass Solid steel 2-1/2" long threaded rod Common 20 TPI thread 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Includes two flat-head slotted screws Product Description Specs An old-style spindle rod with a solid brass thumbturn & small rosette. This piece is excellent for closet, pantry, or smaller doors. The shaft is made of solid steel, making the spindle is sturdy & durable.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style 2-1/4" overall length Standard 20 TPI thread Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Straight split-style spindle Product Description Specs An old-style threaded split spindle rod for doorknobs. It is designed for when a single doorknob is installed on one side of the door. Made of solid steel, this spindle is sturdy & durable.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA · C.S. Osborne ~ Since 1826 Model No. 265 Rawhide palm with riveted joints Iron thimble with heavy duty vinyl attached to rawhide Excellent for leather & canvas Available in both left hand & right hand Product Description Specs A quality USA-made sail palm made by C.S. Osborne. The palm is excellent for sewing leather, canvas, & similar materials. The iron thimble is bound to the rawhide palm. Available in both right & left hand. Made in the USA. From the Manufacturer: Since 1826, the Osborne family had dedicated itself to providing the very finest tools.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Model No. 803 Made of brass-plated steel Universal Fit: Attaches easily to all metal squares Sold as 2 in pack Product Description Specs Stair gages assure fast & uniform layout in repetitive work including angle cuts on rafters & stair stringers . A handy tool that improves the quality of repetitive work. Clamps & attaches easily to all metal squares.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Precision 7/16" size swivel pounce wheel Designed for perforating, dotting, imprinting, tracing, quilting, embossing, overstiching, etc. Body made of Aluminum Product Description Specs Excel 7/16" Swivel Pounce Wheel. Great for tracing, pattern making, marking, quilting, sewing, wooden working & other transferring applications. Made by Excel Blades. Made in USA.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan Made of Aogami No. 2 high carbon steel "Blue Carbon Steel" 6 piece set Wooden handles Includes tool roll Product Description Specs These Japanese carving knives are used for marking, trimming, carving & shaping woodworking & bamboo. 6 PC set. Includes a tool roll for storage. Made by Ikeuchi Hamono. Made in Japan. Hardwick & Sons is pleased to offer quality tools from Japan for the many people who desire special & well-crafted tools.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

20 oz head weight Drop Forged Steel Head Head made in Japan - Handle made with American Hickory Mill Face - Rip Hammer 15-1/2" overall length Hickory hardwood handle Product Description Specs A Japanese 20 oz Mill Face Rip Hammer with Hickory Handle . Mill waffle face. 15-1/2" overall length. Head made in Japan. Handle made from American Hickory. Mill waffle face.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Number "5" house number Made of solid brass material - Lacquered finish 4" size 1/4" thickness Includes two flat head phillips screws Product Description Specs Number Five Solid Brass House Number in a 4" Size. M ade of solid brass material - 1/4" thickness . Lacquered brass finish . Includes two flat head phillips screws. #5 House Number. Hy-Ko Model No. BR-90/5.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Zinc-plated steel #6 size Available as singles, or in a bulk box Product Description Specs #6 washer in zinc-plated steel material. Available as singles, or in a bulk box of 100 pcs. Hardwick & Sons is pleased to offer vintage-style hardware for the many people who desire to fashion their homes with charm, quality, & style. The traditional-style hardware that we showcase are true & faithful reproductions of classic hardware pieces found in the many homes from across America throughout the past century.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional & classic Made of genuine glass Attractive "Black" colored glass Non-lacquered brass finish on brass base (will patina naturally over time) Includes a 8-32 thread machine truss-head screw which allows for invisible rear mounting Product Description Specs This turn-of-century reproduction glass knob has an exquisite & charming star-shaped design fitting for period cabinets & furniture. The glass is carefully set into a handsome brass base with a threaded shank in the back.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan Japanese Tile Nipper 8" long size Product Description Specs Japanese Tile Nipper. Made in Japan. Product Overall Length Japanese Tile Nipper 8" For California Residents: WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan 4" overall length Easy change reversible ratchet direction Flexible head 3/8" DR Chrome Vanadium Steel Product Description Specs This 4" Stubby Ratchet 3/8" Dr with Flex Head is made of C hrome Vanadium Steel. Easy change reversible ratchet direction. 4" overall length. 3/8" drive. Flexible head. Made in Japan. Hardwick & Sons is pleased to offer quality tools from Japan for the many people who desire special & well-crafted tools.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA D esigned to remove broken studs, bolts, socket screws & fittings Un-used old stock Large EX-10 size Aggressive left hand spiral design for extra gripping power Product Description Specs Irwin Spiral Flute Screw Extractor - L arge EX-10 size . Remove broken bolts & screws with these spiral shaft extractors. Irwin Hanson EX-10 Spiral Flute Screw Extractor - Made in USA. Made in USA.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Model No. 520202 - Unused old stock - small amount of rust on shank 1/4" Core Box 2" Overall Length 1/4" shank Product Description Specs Irwin Carbide 1/4" Core Box Router Bit - Made in USA. Carbide - High Grade Steel construction Router Bit. 2" overall length. 1/4" shank. Irwin Blue Diamond Model No. 520202. Made in USA. Product Model # Irwin Carbide 1/4" Core Box Router Bit - Made in USA…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho