Hardwick's Hardware Doorknob Swivel Spindle ~ Coarse Thread

Vintage-style Hardware Traditional-style Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 5/16" (8 mm) thick square shaft in center (measured on the flats) Straight rigid-style spindle Product Description Specs An old-style threaded spindle rod for doorknobs. Made of solid steel, this spindle is sturdy & durable. This particular spindle has a size of 3/8" - 20 threads per inch (TPI), but has a little extra thicker square size (5/16"). Excellent for your reproduction doorknobs, or just a replacement for your old chewed-up spindles.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Straight half-length spindle Product Description Specs An old-style threaded half spindle rod for doorknobs. Designed for mortise locks or rim locks where only one doorknob is used. It is secured by a screw at the end of the spindle. Made of solid steel, this spindle is sturdy & durable. This particular spindle has a size of 3/8"-20 threads per inch (TPI), which is a standard & common size for many doorknobs.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style 2-1/4" overall length Standard 20 TPI thread Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Straight split-style spindle Product Description Specs An old-style threaded split spindle rod for doorknobs. It is designed for when a single doorknob is installed on one side of the door. Made of solid steel, this spindle is sturdy & durable.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style 2-1/2" overall length Standard 20 TPI thread Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Straight split-style spindle Product Description Specs An old-style threaded split spindle rod for doorknobs. It is designed for when a single doorknob is installed on one side of the door. Made of solid steel, this spindle is sturdy & durable.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Standard 20 TPI thread Three 10-24 threaded holes in spindle Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Straight split-style spindle Includes one 10-24 oval head set-screw Product Description Specs An old-style threaded split spindle with three threaded holes for threaded doorknobs, or old doorknobs with square holes. It is designed for locks where a single doorknob is installed on one side of the door.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style - D esigned for non-turning doorknobs Common 20 TPI thread 1" overall length - See here for the longer length Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Includes four flat-head philips screws Sold as two dummy spindles in bag Product Description Specs An old-style threaded spindle rod for dummy doorknobs. Designed specifically for doorknobs where a non-turning doorknob is desired, such as pantry doors, closet doors, folding doors, & French doors.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Thumb turn is made of solid brass Solid steel 3" long threaded rod Common 20 TPI thread 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Includes two flat-head slotted screws Product Description Specs An old-style spindle rod with a solid brass thumbturn & small rosette. This piece is excellent for closet, pantry, or smaller doors. The shaft is made of solid steel, making the spindle is sturdy & durable.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Thumb turn is made of solid brass Solid steel 2-1/2" long threaded rod Common 20 TPI thread 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Includes two flat-head slotted screws Product Description Specs An old-style spindle rod with a solid brass thumbturn & small rosette. This piece is excellent for closet, pantry, or smaller doors. The shaft is made of solid steel, making the spindle is sturdy & durable.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Designed for traditional-style doorknobs with a spindle 28 TPI x 1/4" diameter set screw 1/4" length Hex recessed head Includes a 1/8" hex key Sold as two set screws in pack Available in brass finish, oil rubbed bronze, & polished nickel finishes Product Description Specs These set screws work with traditional-style doorknobs that take threaded spindles. The thread size of the set screw is 28 TPI x 1/4" diameter width, which is a common thread size for holes on old-style door knobs. The screws are made of steel material & are sold in pairs.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Threaded nut for 3/8-20 thread spindles Zinc plated steel 3/16" thickness of nut Sold as single piece Product Description Specs 3/8-20 thread h exagonal nut for optional use with doorknob spindles. Intended for use with split spindles in doors that have a knob from only one side. By tightening the nut against the door lock’s hub, it helps set the spindle in the lock. Made of zinc-plated steel. Outer diameter of nut measures 5/8". 3/16" thickness.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Inside size: 9/32" (7 mm) Outside size: 5/16" (8 mm) Zinc plated steel 5/8" length Sold as single piece Product Description Specs Spindle sleeve (converter) allows a 9/32" (7 mm) wide door spindle to fit snugly in a 5/16" (8 mm) wide hub. Enables a firm & smooth doorknob operation. 5/8" long length. Spindle converter is made of steel material, & is zinc plated; sold as a single piece. Hardwick & Sons is pleased to offer vintage-style hardware for the many people who desire to fashion their homes with charm, quality, & style.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Works well with spindles or doorknobs with threaded holes Made of solid brass Oval-head phillips screws Sold in a four pack Product Description Specs These oval-head screws work well with doorknobs or spindles with threaded holes. The thread size is 10-24 x 3/8", which is a common thread size for spindle holes & doorknobs. The screws are made of solid brass material & are sold as 4 screws in a pack.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Model No. 16651 Vermont American #8 Hinge Bit Self-Centering Drill & Driver Accurately centers pilot holes & drives screws without re-chucking Product Description Specs Vermont American #8 Hinge Bit. Self-Centering Drill & Driver. Accurately centers pilot holes & drives screws without re-chucking. Made in USA.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Classic & popular design Purple color with white lettering 100% spun soft cotton Adult male fit Available in M, XL, & XXL Product Description Specs The classic & ever popular "I Found My Ryoba Nokogiri at Hardwick's" T-shirt. The shirt is made of heavyweight 100% spun soft cotton & the shirt color is purple color with white lettering print. Double needle sleeves & hem for durability. A customer favorite, & a great conversation starter!

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

8" length size 7/8" width Zinc-plated steel material Countersunk holes Product Description Specs These flat mending plate irons are designed for furniture, cabinets, shelving support, etc. Allows for quick & easy repair of items in the workshop, home, & other applications. Made of steel material with a zinc plated finish. Countersunk holes. 8" long size. Screws not included.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Alfa Tools Crimped Wire Wheel 2" diameter wheel Coarse 1/4" shank - 1" length 0.012" Wire Diameter 6000 RPM max Product Description Specs Alfa Tools 2" Coarse Wire Wheel - 1/4" Shank. 0 .012" Wire Diameter. 6000 RPM max. All-steel construction. Applications include deburring, blending, removal of rust, scale, dirt, & finish preparation prior to painting or plating. Made by Alfa Tools. Made in Spain.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Stock #542002 Product Description Specs Bora Clamp Edge Wide Track Auxiliary Clamps . Stock #542002. Product Model # Bora Clamp Edge Wide Track Auxiliary Clamps 542002 For California Residents: WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Model No. 803 Made of brass-plated steel Universal Fit: Attaches easily to all metal squares Sold as 2 in pack Product Description Specs Stair gages assure fast & uniform layout in repetitive work including angle cuts on rafters & stair stringers . A handy tool that improves the quality of repetitive work. Clamps & attaches easily to all metal squares.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan Small-sized chisel set good for fine detail woodwork 3/16" small gouge 1/4" large gouge 3/16" bent V parting tool 1/2" straight skew chisel 7/16" straight chisel 7/16" bent straight chisel Product Description Specs A good & basic Japanese-made 6-piece set of palm handle chisels. They are great for fine detail carving woodwork. Six of the most basic & useful chisel styles are included in this set, & the half-round palm-style handles are made of hardwood. Made in Japan.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Model LS087 Forged & tempered 5/8" width of square end 3/4" width of leaf end 9-1/2" overall length Product Description Specs These Marshalltown QLT Ornamental Tools are forged & tempered. This small tool has a trowel end & square end that are used to detail foam shapes & unusual wall surfaces. Ideal for working in small areas . Product Overall Length Square End Width Leaf End Width Model # Marshalltown Small Tool Leaf & 5/8" Square 9-1/2" 5/8" 3/4"…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Model No. 8071 Great for reaching hard to get at screws #1 & #2 Phillips - 1/4" & 3/8" slotted bits Blades are made of machined, ground & hardened tool steel Drive rotation can be reversed instantly 4" overall length Knurled bits allow screws to be finger tightened Product Description Specs This is a Ratcheting Screwdriver with #1, #2 Phillips & 1/4", 3/8" slotted bits & a pass-through handle is ideal for use where screws are concealed or obstructed, leverage is required, or where turning space is limited.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

3M Model 62093H1-DC Designed for use for mold remediation, sanding/scraping lead based paint in accordance with local government regulations or guidance Product Description Specs This 3M Demolition & Renovation Respirator is for u se for particulates during sawing, sanding, & grinding. Balanced design for more comfort. Can be used for sanding and scraping of lead-based paint in certain projects. NIOSH (National Institute for Occupational Safety and Health) approved: P100. Replacement filter cartridge available . NIOSH approved: Organic vapor/acid gas/P-100.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA D esigned to remove broken studs, bolts, socket screws & fittings Un-used old stock Large EX-10 size Aggressive left hand spiral design for extra gripping power Product Description Specs Irwin Spiral Flute Screw Extractor - L arge EX-10 size . Remove broken bolts & screws with these spiral shaft extractors. Irwin Hanson EX-10 Spiral Flute Screw Extractor - Made in USA. Made in USA.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Number "5" house number Made of solid brass material - Lacquered finish 4" size 1/4" thickness Includes two flat head phillips screws Product Description Specs Number Five Solid Brass House Number in a 4" Size. M ade of solid brass material - 1/4" thickness . Lacquered brass finish . Includes two flat head phillips screws. #5 House Number. Hy-Ko Model No. BR-90/5.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho