Hardwick's Hardware Doorknob Swivel Spindle ~ Standard Thread

Vintage-style Hardware Traditional-style Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 5/16" (8 mm) thick square shaft in center (measured on the flats) Straight rigid-style spindle Product Description Specs An old-style threaded spindle rod for doorknobs. Made of solid steel, this spindle is sturdy & durable. This particular spindle has a size of 3/8" - 20 threads per inch (TPI), but has a little extra thicker square size (5/16"). Excellent for your reproduction doorknobs, or just a replacement for your old chewed-up spindles.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Straight half-length spindle Product Description Specs An old-style threaded half spindle rod for doorknobs. Designed for mortise locks or rim locks where only one doorknob is used. It is secured by a screw at the end of the spindle. Made of solid steel, this spindle is sturdy & durable. This particular spindle has a size of 3/8"-20 threads per inch (TPI), which is a standard & common size for many doorknobs.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style 2-1/4" overall length Standard 20 TPI thread Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Straight split-style spindle Product Description Specs An old-style threaded split spindle rod for doorknobs. It is designed for when a single doorknob is installed on one side of the door. Made of solid steel, this spindle is sturdy & durable.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Coarse 16 TPI thread Made of solid steel 3/8" size from point to point on rod - Coarse 16 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Straight split-style spindle Product Description Specs An old-style threaded split spindle with three threaded holes for threaded doorknobs, or old doorknobs with square holes . It is designed for when a single doorknob is installed on one side of the door. Made of solid steel, this spindle is sturdy & durable.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style 2-1/2" overall length Standard 20 TPI thread Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Straight split-style spindle Product Description Specs An old-style threaded split spindle rod for doorknobs. It is designed for when a single doorknob is installed on one side of the door. Made of solid steel, this spindle is sturdy & durable.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style - D esigned for non-turning doorknobs Common 20 TPI thread 1" overall length - See here for the longer length Made of solid steel 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Includes four flat-head philips screws Sold as two dummy spindles in bag Product Description Specs An old-style threaded spindle rod for dummy doorknobs. Designed specifically for doorknobs where a non-turning doorknob is desired, such as pantry doors, closet doors, folding doors, & French doors.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style - Designed for non-turning doorknobs Coarse 16 TPI thread 1-1/4" overall length Made of solid steel 3/8" size from point to point on rod - Coarse 16 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Includes four flat-head philips screws Sold as two dummy spindles in bag Product Description Specs An old-style threaded spindle rod for dummy doorknobs. Designed specifically for doorknobs where a non-turning doorknob is desired, such as pantry doors, closet doors, folding doors, & French doors.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Thumb turn is made of solid brass Solid steel 3" long threaded rod Common 20 TPI thread 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Includes two flat-head slotted screws Product Description Specs An old-style spindle rod with a solid brass thumbturn & small rosette. This piece is excellent for closet, pantry, or smaller doors. The shaft is made of solid steel, making the spindle is sturdy & durable.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Thumb turn is made of solid brass Solid steel 2-1/2" long threaded rod Common 20 TPI thread 3/8" size from point to point on rod - Standard 20 TPI thread 9/32" (7 mm) thick square shaft (measured on the flats) Includes two flat-head slotted screws Product Description Specs An old-style spindle rod with a solid brass thumbturn & small rosette. This piece is excellent for closet, pantry, or smaller doors. The shaft is made of solid steel, making the spindle is sturdy & durable.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Threaded nut for 3/8-20 thread spindles Zinc plated steel 3/16" thickness of nut Sold as single piece Product Description Specs 3/8-20 thread h exagonal nut for optional use with doorknob spindles. Intended for use with split spindles in doors that have a knob from only one side. By tightening the nut against the door lock’s hub, it helps set the spindle in the lock. Made of zinc-plated steel. Outer diameter of nut measures 5/8". 3/16" thickness.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Designed for traditional-style doorknobs with a spindle 28 TPI x 1/4" diameter set screw 1/4" length Hex recessed head Includes a 1/8" hex key Sold as two set screws in pack Available in brass finish, oil rubbed bronze, & polished nickel finishes Product Description Specs These set screws work with traditional-style doorknobs that take threaded spindles. The thread size of the set screw is 28 TPI x 1/4" diameter width, which is a common thread size for holes on old-style door knobs. The screws are made of steel material & are sold in pairs.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional-style Works well with spindles or doorknobs with threaded holes Made of solid brass Oval-head phillips screws Sold in a four pack Product Description Specs These oval-head screws work well with doorknobs or spindles with threaded holes. The thread size is 10-24 x 3/8", which is a common thread size for spindle holes & doorknobs. The screws are made of solid brass material & are sold as 4 screws in a pack.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

General Tools Model 138T Taper design for the removal of faucet seats Hardened alloy steel Fits most faucet seats Zinc plated to prevent rust Product Description Specs This General Tools Tapered Faucet Seat Wrench 138T is ideal for professional or DIY plumbing . Taper design for the removal of faucet seats. Hardened alloy steel. Fits most faucet seats. Zinc plated to prevent rust.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in England Henry Taylor Diamic Model No. F4 1" wide blade Forged, hardened & tempered blade Brass ferrule Lacquered Beech handle Product Description Specs A 1" Offset Paring Gouge made by Henry Taylor Tools in England . Offset bent blade. Henry Taylor - Diamic ~ Model No. F4. Made in UK . From the Manufacturer - About Henry Taylor: Established in 1834, Henry Taylor Tools have manufactured a wide range of quality hand-crafted tools through 3 centuries, from our forge based in Sheffield (UK).

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Antique Nickel finish on steel material 5/8" radius corners 4" x 4" size hinge Button tip Removable pin Includes flat head screws Sold as two hinges in pack Product Description Specs A pair of 4 " Antique Nickel Door Hinges with 5/8" radius corners & a removable pin. Antique Nickel finish on steel material. Countersunk holes. Includes flat head screws. 4" x 4" door hinge size. Five knuckle, full mortise design. Ultra Hardware No. 35049.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Model No. 15-106A Excellent for cutting intricate patterns & irregular shapes High-grade carbon hardened & tempered blade provides clean, controlled cutting action 6-1/2" cutting depth - 360 º blade pivot at 45º increments Nickel-plated steel frame & cushion handle Cuts wood, plastic, light metal & wallboard Product Description Specs This FatMax Coping Saw has a high-grade carbon hardened & tempered blade & an ergonomically-designed cushion grip handle.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

3M Model 62093H1-DC Designed for use for mold remediation, sanding/scraping lead based paint in accordance with local government regulations or guidance Product Description Specs This 3M Demolition & Renovation Respirator is for u se for particulates during sawing, sanding, & grinding. Balanced design for more comfort. Can be used for sanding and scraping of lead-based paint in certain projects. NIOSH (National Institute for Occupational Safety and Health) approved: P100. Replacement filter cartridge available . NIOSH approved: Organic vapor/acid gas/P-100.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

White painted finish on steel material 5/8" radius corners 4" x 4" size hinge Button tip Removable pin Includes flat head screws Sold as three hinges in pack Product Description Specs Three 4 " White Painted Door Hinges with 5/8" radius corners & a removable pin. White color finish on steel material. Countersunk holes. Includes flat head screws. 4" x 4" door hinge size. Five knuckle, full mortise design. Ultra Hardware No. 61756.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Model No. 16651 Vermont American #8 Hinge Bit Self-Centering Drill & Driver Accurately centers pilot holes & drives screws without re-chucking Product Description Specs Vermont American #8 Hinge Bit. Self-Centering Drill & Driver. Accurately centers pilot holes & drives screws without re-chucking. Made in USA.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Un-opened package - New Stock Norton - Model 87944 Made in USA 3 sharpening stones included in kit: Medium grit, Fine grit, Very Fine grit 6" x 2" x 5/16" size sharpening stones Includes sharpening base Product Description Specs Norton Angle-Rite Sharpener - 3 Stone Sharpening Kit with base. Made in USA. Product Norton Angle-Rite Sharpener - 3 Stone Sharpening…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

3M Model 3920-BR Brown color duct tape 20 yards x 1.88 inches Multi-purpose tape with strong adhesive to create a secure bond Great for bundling, taping cords, patching, reinforcing & more Water-resistant backing T ears vertically & horizontally for versatile application Product Description Specs W hether you want your quick fix to blend in or stand out, 3M Colored Duct Tape is the boldly hued solution to match your project’s color scheme. Equipped with strong adhesive & a water-resistant backing, this tape is perfect for your temporary repairs.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Precision 7/16" size swivel pounce wheel Designed for perforating, dotting, imprinting, tracing, quilting, embossing, overstiching, etc. Body made of Aluminum Product Description Specs Excel 7/16" Swivel Pounce Wheel. Great for tracing, pattern making, marking, quilting, sewing, wooden working & other transferring applications. Made by Excel Blades. Made in USA.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan Japanese Tile Nipper 8" long size Product Description Specs Japanese Tile Nipper. Made in Japan. Product Overall Length Japanese Tile Nipper 8" For California Residents: WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

When heat needs to surround - bending, soldering pipe, shrinking tubing Use with any Milwaukee Heat Gun Product Description Specs The 49-80-0292 Hook Nozzle can be used with all Milwaukee Heat Guns for bending, soldering pipe, shrinking tubing or any application where the heat needs to surround the work piece. Includes nozzle only .

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho