Bells of Steel Magnetic Clamp Collars
$39.99$27.99Sold by Bells of Steel
Clamp down on runaway weight plates with the Magnetic Clamp Collars! Magnetized for ultra-convenient storage and rubberized to protect your barbell. The slim design leaves plenty of room to push the big weights. No more battling with spring collars- just flip the lever for easy release and stick these bad boys to your rack for convenient storage. IMPORTANT: The specs listed are for a single Magnetic Clamp Collar. Sold in pairs.
More like this
Bells of Steel Spring Collars
What can we say about spring collars? Lots! Here's a 15-line epic poem: Just kidding. T hese training essentials fit 2" Olympic barbell sleeves, have polished chrome for a longer lifespan, and keep your weight plates secure. Sold in pairs.
Bells of Steel Barbell Zip Clips - Half Standard (Pair)
Made in-house at our Calgary warehouse, these patent-pending barbell clips are truly unique. They are created using our own 3D printer using ABS or PLA plastic filament, which are comparable in terms of durability. These are designed for SPEED with easy on, easy off: just pinch the tabs and slide them on or off your barbells. The pressure-cuff design keeps your weight plates secure without scuffing up your equipment. Ideal for training alone as the pressure is strong enough to keep your plates in place, but loose enough to be able to dump plates if you need in a sticky situation.
Bells of Steel Safety Strap Connectors
Don't compromise on safety when it comes to your training! The Safety Strap Connectors mount to your rack uprights and act as an anchor point for safety straps. Together, they offer unparalleled protection and peace of mind, gently catching a loaded barbell without sacrificing security. IMPORTANT: Select connectors that match the upright & hole size of your power rack.
Bells of Steel Camber Bar Attachment - Pair
Save space and target your stabilizer muscles with the Camber Bar Attachment (sold in pairs). Just slide them over the sleeves of your Olympic barbell, lock them in place with the threaded bolt, and add your weight plates to the camber bar sleeves. Store away in the corner to keep the chaos contained when not in use. Dare to be bold with lunges, squats, good mornings, bench presses, and overhead presses, all with a little more spice. IMPORTANT : Locking bolt may cause wearing of barbell sleeves over time.
Bells of Steel Accessory Holder (Wall or Rack Mounted)
Bid a not-so-fond farewell to impossibly tangled bands, sweat-soaked support wear, and chaotically misplaced Barbell Collars . You'll never look like one of those poor, helpless saps who can't do anything right in an infomercial again. Mount it directly to your wooden wall studs, your concrete wall, or your power rack (Hydra, Manticore or 2.3”) to keep your accessories secure, out of the way, and readily accessible for your next lifting masterpiece!
Bells of Steel Pin Plate Pegs
Keep your weight plates organized and easy to access with rack-mountable plate pegs. These convenient drop-in pegs are adjustable in seconds with sleeves to fit Olympic-sized weight plates. Black powder coat protects your plates while reducing friction for easy loading and unloading. Choose the plate pegs that fit your power rack. Sold in pairs. - 2.3" version: 9" loadable length - Hydra version: 12.5" loadable length - Manticore version: 12.5"…
Bells of Steel Safety Straps for 2.3" x 2.3" Racks
Don't compromise on safety when it comes to your training. Safety Straps offer unparalleled protection and peace of mind, gently catching a loaded barbell without sacrificing security. Select the safeties that correspond with the depth and hole sizing of your power rack.
Bells of Steel Bolt-On Plate Peg Sets
Get 5 pairs of bolt-on plate pegs (3 pairs of 13" pegs & 2 pairs of 5" pegs) to turn your power rack into a weight plate storage mecca. Black powder coat protects your Olympic-sized weight plates while making them easy to load and unload. We've conveniently bundled them together to save you valuable time clicking (then wasted it by making you read this sentence). Choose the plate peg set that fits your power rack measurements. Easy installation. Hardware included.
Bells of Steel Barbell Pads with Straps
Sick of getting bitten by your barbell? Muzzle it up with one of these ergonomic Barbell Pads! Choose from a range of colors and secure it quickly with the included straps. The cushy 1.25" thick pad is 17.3" long to keep you covered and bruise-free as you squat, hip thrust, lunge, and more.
Bells of Steel Band Pegs with Carabiners
Band Pegs are designed to help strengthen those sticking points and blast through plateaus. Use bands to add resistance to squats, rack pulls, benching, and more. The carabiners offer extra security if you have nightmares about bands coming unhooked and slapping you silly. Select the band pegs that match your power rack specs. Sold in pairs.
Bells of Steel Safety Straps for Hydra & Manticore Racks
Don't compromise on safety when it comes to your training. Safety Straps offer unparalleled protection and peace of mind, gently catching a loaded barbell without sacrificing security. Select the safeties that correspond with the depth and hole sizing of your power rack.
Bells of Steel 3 Barbell Wall Rack
This nifty wall mounted barbell holder lets you store your bars horizontally on your wall. It gives your bars the center-piece flair they deserve while giving you more room for activities — ahem, exercise. HDPE plastic lining protects the knurling on your barbell for a lifetime of lifting pleasure. Not so handy? No worries! All you need to install is a level and some basic tools. We highly recommend mounting it on your wall studs or using a stringer, but wall anchors are included as well as a third option.
More from Bells of Steel
Add to one order and ship it together.
Bells of Steel USA Blitz Bike Monitor
Replacement monitor for the Blitz Bike & Residential Blitz Bike .
Bells of Steel Dead Bounce Conflict Bumper Plate Sets
It's time to bump up your lifting game! These non-smelly, DB (dead bounce) virgin rubber bumper plates have a thick stainless steel insert ring with 3 anchor points to prevent common bumper breakdowns. The number one advantage of bumpers is safety for the lifter. A lifter who hesitates to dump a barbell because they're afraid of damage to the floor or the equipment is more likely to get hurt. Bumpers take any worry about damage completely out of the equation.
Bells of Steel Fixed Barbells - Easy Curl
Whether you own a lavish home gym or an expansive training facility, fixed barbells are the pinnacle of convenience. These bad boys come in 10 preset weight increments, so you can quickly grab the perfect weight for your workout without doing any plate math to save yourself time and mental energy. They feature two shaft styles: an iconic straight shaft and a joint-friendly curved design. Both styles boast a light knurling that's perfect for those classic barbell exercises.
Bells of Steel Machined Iron Olympic Weight Plates
Weight is weight, right? But what if I told you your sloppy, 45lb plates you got for your 16th birthday from the local big box store were lying to you? The process of casting molten hot iron into molds can be fickle. Machined iron plates are cast in a specialty casting factory with over 40 years of experience, then finished on a lathe that shaves off excessive weight from the back of the plate, followed by polishing and machining edges for an even smoother, more aesthetic plate. The machined plates have a guaranteed tolerance of +/- 1% for 45, 35, and 25 and +/- 3% for 15, 10, 5, and 2.5.
Bells of Steel USA Footplate for Cable Tower/All In One Trainer
Sick of bracing your feet on a skinny beam mid–lat pulldown? Enter the Footplate for Cable Towers & All In One Trainers: a simple, sturdy add-on that fixes one of the most annoying cable tower quirks. No bolts, no assembly, no fuss. Just pop it out of the box, set it in place, and once your feet are planted, it stays locked down tighter than your lifting belt on PR day. Small upgrade, BIG difference in comfort and stability. This grippy checkerboard steel plate slides right onto your Bells of Steel 2.3” x 2.3” (60mm) setup: Cable Tower , All-in-One Trainer , or Power Rack .
Bells of Steel Barbell Pads with Straps
Sick of getting bitten by your barbell? Muzzle it up with one of these ergonomic Barbell Pads! Choose from a range of colors and secure it quickly with the included straps. The cushy 1.25" thick pad is 17.3" long to keep you covered and bruise-free as you squat, hip thrust, lunge, and more.
Bells of Steel Belt Squat Machine
Out-train back pain and upper body mobility limitations while building lower body strength. The Belt Squat Machine is space-efficient and versatile, unlocking endless exercises for your home gym at an unbeatable price. Built like a tank, this beast boasts an impressive 700lb capacity (step aside, Hip Thrust Machine ). Plus, its innovative design features commercial-grade Zerk bearings and band pegs for improving your lockout strength. Despite its beastly strength, this strength machine is a gentle giant in your gym space.
Bells of Steel Oly Lifting Needle Bearing Bar - Women's
The B.o.S. Women's Barbell 3.0 is dollar-for-dollar the best women's weightlifting barbell you can buy. Olympic weightlifting isn't just a sport, it's an art. This requires a bar to match your skill and strength - the B.o.S. Women's Barbell 3.0 is that masterpiece. In fact, it won Garage Gym Reviews' Best Olympic Weightlifting Bar for Women in 2023! Its 25mm shaft, needle bearings, and hard chrome finish deliver a smooth spin, a lively whip, and a secure grip. And while not IWF approved, you can still use it to practice for the big stage. Looking for a multi-purpose bar instead?
Bells of Steel Fat Bar - Tricep Pressdown
Sculpt your arms into a set of triumphantly terrific triceps with the Fat Bar Tricep Pressdown! Whether you’re into grappling sports, arm wrestling, or just want to build your grip strength, fat bar attachments are a game-changer. Its unique design builds your grip in ways a typical cable attachment can’t match and allows for peak tricep targeting on tricep pushdowns. Compatible with any cable machine using a carabiner. IMPORTANT: Requires a carabiner (not included by default) for use on your cable machine.
Bells of Steel Machined Iron Olympic Weight Plate Sets
Weight is weight, right? But what if I told you your sloppy, 45lb plates you got for your 16th birthday from the local big box store were lying to you? The process of casting molten hot iron into molds can be fickle. Machined iron plates are cast in a specialty casting factory with over 40 years of experience, then finished on a lathe that shaves off excessive weight from the back of the plate, followed by polishing and machining edges for an even smoother, more aesthetic plate. The machined plates have a guaranteed tolerance of +/- 1% for 45, 35, and 25 and +/- 3% for 15, 10, 5, and 2.5.
Bells of Steel Weighted Vest
The Weight Vest turns up the burn on your bodyweight exercises, conditioning workouts, and cardio sessions. Adjustable for a snug fit, it hugs your body like your favorite hoodie but adds, well, weights. Using it is simple: slide in your desired training plates — available in 5lb, 7.5lb, 10lb, and 20lb pairs — and strap the vest on. It’s highly adjustable with thick-padded shoulder straps & raised padded areas inside, improving breathability. The weight stays close to your body, so you can focus on form.
Nuobell NÜOBELL 50 to 80 LB Expansion Kit - Standard (Chrome)
Take your strength training further with the Nuobell 50 to 80-pound Expansion Kit! When 50 pounds no longer challenges you, this kit efficiently upgrades your existing Nuobell set to a powerful 80 pounds per dumbbell. This comprehensive kit includes all the necessary weights and a longer cradle, pre-assembled to smoothly transition your Nuobell set from 50 to 80 pounds—saving you the expense and space of acquiring a whole new set. Download Nuobell 50 to 80 LB Expansion Kit - Standard (Chrome) Product…