Bells of Steel Barbell Zip Clips - Half Standard (Pair)
$25.99$19.99Sold by Bells of Steel
Made in-house at our Calgary warehouse, these patent-pending barbell clips are truly unique. They are created using our own 3D printer using ABS or PLA plastic filament, which are comparable in terms of durability. These are designed for SPEED with easy on, easy off: just pinch the tabs and slide them on or off your barbells. The pressure-cuff design keeps your weight plates secure without scuffing up your equipment. Ideal for training alone as the pressure is strong enough to keep your plates in place, but loose enough to be able to dump plates if you need in a sticky situation.
More like this
Bells of Steel Magnetic Clamp Collars
Clamp down on runaway weight plates with the Magnetic Clamp Collars! Magnetized for ultra-convenient storage and rubberized to protect your barbell. The slim design leaves plenty of room to push the big weights. No more battling with spring collars- just flip the lever for easy release and stick these bad boys to your rack for convenient storage. IMPORTANT: The specs listed are for a single Magnetic Clamp Collar. Sold in pairs.
Bells of Steel Spring Collars
What can we say about spring collars? Lots! Here's a 15-line epic poem: Just kidding. T hese training essentials fit 2" Olympic barbell sleeves, have polished chrome for a longer lifespan, and keep your weight plates secure. Sold in pairs.
Bells of Steel Barbell Pads with Straps
Sick of getting bitten by your barbell? Muzzle it up with one of these ergonomic Barbell Pads! Choose from a range of colors and secure it quickly with the included straps. The cushy 1.25" thick pad is 17.3" long to keep you covered and bruise-free as you squat, hip thrust, lunge, and more.
Bells of Steel Camber Bar Attachment - Pair
Save space and target your stabilizer muscles with the Camber Bar Attachment (sold in pairs). Just slide them over the sleeves of your Olympic barbell, lock them in place with the threaded bolt, and add your weight plates to the camber bar sleeves. Store away in the corner to keep the chaos contained when not in use. Dare to be bold with lunges, squats, good mornings, bench presses, and overhead presses, all with a little more spice. IMPORTANT : Locking bolt may cause wearing of barbell sleeves over time.
Bells of Steel Fixed Barbells - Easy Curl
Whether you own a lavish home gym or an expansive training facility, fixed barbells are the pinnacle of convenience. These bad boys come in 10 preset weight increments, so you can quickly grab the perfect weight for your workout without doing any plate math to save yourself time and mental energy. They feature two shaft styles: an iconic straight shaft and a joint-friendly curved design. Both styles boast a light knurling that's perfect for those classic barbell exercises.
Bells of Steel Self Locking Belt
From powerlifting to conditioning workouts, this belt has your back. Subpar velcro belts are notorious for not being able to be tightened enough or literally exploding off your body during the middle of a rep — talk about risqué! However, the Bells of Steel self-locking belt sidesteps these two issues completely with the dual safety pin system. Unlike a prong lifting belt or lever belt with a fixed number of sizes, our Classic Self Locking Belt offers wayyyyy more customization from its full velcro strip.
Bells of Steel Pin Plate Pegs
Keep your weight plates organized and easy to access with rack-mountable plate pegs. These convenient drop-in pegs are adjustable in seconds with sleeves to fit Olympic-sized weight plates. Black powder coat protects your plates while reducing friction for easy loading and unloading. Choose the plate pegs that fit your power rack. Sold in pairs. - 2.3" version: 9" loadable length - Hydra version: 12.5" loadable length - Manticore version: 12.5"…
Bells of Steel Colored Bumper Plate Sets
Designed to catch your eye, while adding to the lifespan of your home gym. These non-smelly, colored bumper plates have a thick stainless steel insert ring with 3 anchor points to prevent common bumper breakdowns. Colored bumpers are not just aesthetically pleasing, they offer additional functionality. It can often be frustrating trying to quickly and easily identify the plates you need for your workout. With their eye-catching colors, this is no longer an issue with the Colored Bumper Plates.
Bells of Steel Technique Plates - 5 Lbs (Pair)
Set a strong foundation for strength with Technique Bumper Plates. These weight plates are the same size as their heavier big brothers, so your barbell height stays consistent whether you're warming up or learning the snatch (good luck). Your form stays flawless, and you stay injury-free—unless you trip over your own feet, but we can't help with that. Technique plates are perfect for beginners who are learning the ropes—or the bars. No more trying to guestimate your starting position with an empty bar or tiny 5lb plates.
Bells of Steel Weightlifting Chains
Our rust-resistant, zinc-plated chains are perfect for busting through sticking points and plateaus by adding progressive resistance to your training regimen. Choose sets ranging from 5lbs to 107lbs, with an easy-to-use feeder chain for easy loading. Similar to resistance bands , the chains you are lifting progressively become heavier, providing maximum muscular stimulation throughout the entire range of motion. At the bottom of a squat or bench, the chains pool on the floor and ease the burden. Near the top, things get HEAVY. They also look and sound totally badass. How much chain do I need?
Bells of Steel Safety Strap Connectors
Don't compromise on safety when it comes to your training! The Safety Strap Connectors mount to your rack uprights and act as an anchor point for safety straps. Together, they offer unparalleled protection and peace of mind, gently catching a loaded barbell without sacrificing security. IMPORTANT: Select connectors that match the upright & hole size of your power rack.
Bells of Steel Colored Bumper Plates
Designed to catch your eye, while adding to the lifespan of your home gym. These non-smelly, colored bumper plates have a thick stainless steel insert ring with 3 anchor points to prevent common bumper breakdowns. Colored bumpers are not just aesthetically pleasing, they offer additional functionality. It can often be frustrating trying to quickly and easily identify the plates you need for your workout. With their eye-catching colors, this is no longer an issue with the Colored Bumper Plates.
More from Bells of Steel
Add to one order and ship it together.
Bells of Steel Nylon Adjustable Length Single Handle Cable Attachment
Isolate your arms, chest & more! The Nylon Adjustable Length Single Handle is compatible with any cable machine using carabiners and is excellent for curls, shoulder raises and chest flies. The handle rotates smoothly and the grips are comfortable to hold, so you can train to failure without feeling like you're holding onto a wet spaghetti noodle. Even better, it features 5 attachment points to your carabiner to make length adjustments a breeze. IMPORTANT: Requires a carabiner (not included by default) for use on your cable machine.
Bells of Steel Roll of Gym Flooring (50')
Made of recycled rubber powder, this ultra-smooth rubber roll is perfect for covering your whole home gym or commercial gym. With a home gym you get the joy of adding flooring around awkwardly shaped objects like furnaces, vents, and load-bearing walls. No reason to panic, though! A sharp utility knife and some careful trimming will save the day. Its easy-to-clean rubber surface simply needs a quick once-over with a mop, and you're good to go. And while mopping is a great warm-up, maybe wait until after you squat so you don't turn your PR into an ER.
Bells of Steel Squat Stands (2.3" x 2.3", ⅝" HOLES)
Weighing in at a beefy 73lbs for maximum stability, the Squat Stands 3.0 can be used in home gyms or commercial settings, for instance, weightlifting clubs. Superior 1" spacing through the bench and pull zone and 2" spacing above and below allow you to select the perfect height for your j-cups, for precision lift-offs that can make the difference between a good rep and a superb rep. Trying to decide between squat stands and a power rack? Then check out Squat Stands vs Power Racks: How to Choose .
Bells of Steel Glute Ham Slider
The perfect posterior chain pulverizer, the Glute Ham Slider allows you to tuck your heels or toes into to perform a multitude of hamstring blasting movements or use the handles for ab rolls and other creative upper body exercises. Use the eyelet to connect to a cable machine for even more versatility. The heavy-duty wheels and black powder coat provide durability, rust resistance, and a smooth ride with a space-efficient design that makes storage simple.
Bells of Steel Ergo Rubber Hex Dumbbell Sets
These commercial-grade dumbbells are hex -ceptionally priced. Our hex dumbbells are made of 50% virgin and 50% recycled rubber — the perfect blend of environmentally-friendly and durable materials to reduce the noise and impact they make against your home gym flooring . Their chrome-plated handles are resistant to corrosion and rust and are ergonomically shaped for a comfortable grip. Plus, they feature fully-welded heads to maximize longevity. Prefer a consistently straight handle to hold? Straight Handle Dumbbells are also available.
Bells of Steel Hip Thrust Machine
Building your booty has never been this easy! Well, the set-up, that is. The heavy lifting is still up to you. This hip thrust machine will make your reps count. Its angled footplate allows for a deep stretch in the bottom of the exercise, without needing gymnast-level ankle flexibility. And with the pivoting pad, your back is supported from rock bottom to full extension. The 31.75” x 18.75” footplate of this hip thrust machine is spacious enough to accommodate big feet and wider stances.
Bells of Steel Classic Figure 8 Lifting Straps
So you think you shouldn’t lift heavier than you can hold? Pfffft . Get a GRIP. Sure, we’re all for improving your grip s trength and * ahem * getting your hands dirty, but let’s be real: your grip shouldn’t limit you from growing the LARGEST muscles in your body. The Figure 8 design provides an ultra-fast and easy setup, with durable quality made to last. Studies showed that using straps leads to greater perceived grip security and power — and there’s nothing we weightlifters more than a placebo effect. I’ll take my questionable supps shaken, not stirred, thanks.
Bells of Steel Adjustable Ankle Strap Cable Attachment - Pair
Ankle straps are widely popular in the glute-training community for kickbacks, donkey kicks and lateral leg raises. But that's not all they're good for! With 2 d-ring attachment points, the ankle straps are great for laying knee tucks and leg lifts if you don't have access to a pull-up bar or find your grip is the limiting factor and don't care for Hanging Ab Straps (we won't take it personally). Wear them on your wrists to perform shoulder-pumping lateral raises & chest flies on a Cable Tower or a better mind-muscle connection or to work around a hand injury. Sold as a pair.
Bells of Steel Foam Roller Storage
Wall-mounted Foam Roller Storage saves floor space, is adaptable to any foam roller length, and fits foam rollers up to 6" in diameter. Designed to work like a can dispenser of ye olden days of the 1980s, this storage system will keep your foam rollers neatly stacked and off of the floor, preventing any mishaps that set you a PR in medical bills. IMPORTANT: Mounting hardware is included. Brackets must be securely mounted to a wall stud or concrete wall for user and equipment safety.
Bells of Steel Adjustable Length Aluminum Handles - Pair
Isolate your arms, chest & more! The Adjustable Aluminum Handles are compatible with any cable machine using carabiners and are excellent for curls, shoulder raises, chest flies, and much more. The 5.25" wide handles rotate smoothly and the aluminum coating will help keep those pesky rust fairies away. Adjust them to the perfect length using the five heavy-duty d-rings. IMPORTANT: Requires carabiners (not included by default) for use on your cable machine.
Bells of Steel USA Manticore Four Post Converter Bench
The four-post bench station is what you see at powerlifting meets and serious commercial gyms. It’s a dedicated bench press station, made your way when you add your favourite safeties and j-cups — and the Converter Bench makes it happen. What makes this one different from the competition is the floating bench design. The Converter Bench hangs between the specialty crossmembers with ZERO POSTS UNDERNEATH. That means you can tuck your feet back as far as you want without hitting anything. For powerlifters who rely on leg drive, this is a big deal.
Bells of Steel Urethane-Coated Change Plate Sets
If you want bragging rights for having the nicest plates on the block, then these Urethane Change Plates are a must-have. Due to their urethane construction, colors have more "pop" to them. This makes lettering and numbers appear crisper, adding a noticeable level of professionalism that'll make others go "DAAAAAMNN!" Urethane is also a much harder material than rubber, so these urethane change plates are a huge step above the durability of rubber bumpers — even our competition bumper plates can't match their toughness.