Bells of Steel Front Foot Stabilizers

Like a new parent, the Fixed Barbell Rack will have you showing off your babies with pride. Store up to 10 barbells with a space-efficient, easy-to-access design. This high-touch storage system fits various brands of fixed barbells, so you don't have to marry Bells of Steel (but you should; we're a catch.) The storage hooks are 35.5″ apart, so non-Bells of Steel barbells will also fit as long as the shaft of your bars is at least 36″ long. The Fixed Barbell Rack can hold fixed barbells or traditional Olympic barbells .

by Bells of Steel

These Storage Shelves are designed to handle everything from dumbbells to med balls without sacrificing floor space or durability. This versatile beast adapts as your gear (and impulse buys) grow. Each shelf holds up to 450kg (almost 1,000lbs!). Mount to your Hydra or Manticore power rack with ⅝” holes/keyholes. Choose between: Solid-bottom Dumbbell & Kettlebell Shelf – Mount flat or tilted, with an optional lip to keep your gear from bailing. Open-rail Bumper & Med Ball Shelf – Two rails, open center, built to cradle the heaviest bumpers to the tiniest B.o.S medicine balls.

by Bells of Steel

This nifty wall mounted barbell holder lets you store your bars horizontally on your wall. It gives your bars the center-piece flair they deserve while giving you more room for activities — ahem, exercise. HDPE plastic lining protects the knurling on your barbell for a lifetime of lifting pleasure. Not so handy? No worries! All you need to install is a level and some basic tools. We highly recommend mounting it on your wall studs or using a stringer, but wall anchors are included as well as a third option.

by Bells of Steel

Bid a not-so-fond farewell to impossibly tangled bands, sweat-soaked support wear, and chaotically misplaced Barbell Collars . You'll never look like one of those poor, helpless saps who can't do anything right in an infomercial again. Mount it directly to your wooden wall studs, your concrete wall, or your power rack (Hydra, Manticore or 2.3”) to keep your accessories secure, out of the way, and readily accessible for your next lifting masterpiece!

by Bells of Steel

Store a barbell above your power rack, converting it into a useable pull-up station - for smarter storage AND a bigger back. The 3D-printed Hydra Barbell Holder Rack Attachment is made to fit perfectly on true 3" x 3" tubing with 5/8" holes but will fit smaller racks with a DIY shim. With a 500lb capacity, this versatile storage solution will hold barbells up to 32mm in diameter. Place your barbell across the power rack for a makeshift pull-up station, ideal for lifters with a Lat Pulldown attachment.

by Bells of Steel

The Flat Foot Power Rack is where classic design and rock-solid stability team up with a chalky fist bump of swoleship. Its 1,000-pound capacity outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks. By matching the same tubing specs as many of our American competitors, you can mix and match attachments freely without needing to stick to one brand - hello, open ecosystem!

by Bells of Steel

You may be more than a pretty face, but dropping a loaded barbell while benching certainly won’t improve things. Stay safe while benching or squatting with the heavy-duty Spotter Arms Attachment! Or use them as a secondary squat/bench station for barbell supersets! UHMW lining protects your barbell from damage, while the Manticore version boasts extra UHMW to keep your rack uprights in tip-top shape. - 60mm version: compatible with our 60mm racks and non-B.o.S. 2.3" x 2.3" racks with 5/8" holes. - Hydra version: compatible with our Hydra racks and non-B.o.S.

by Bells of Steel

The Flat Foot Power Rack is where classic design and rock-solid stability team up with a chalky fist bump of swoleship. Its 1,000-pound capacity outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks. By matching the same tubing specs as many of our American competitors, you can mix and match attachments freely without needing to stick to one brand - hello, open ecosystem!

by Bells of Steel

The Hydra Batwing Customizer mounts to the sides of your power rack to unlock huge storage for weight plates and accessories in a small footprint! Choose the height of your uprights and the number of cross-members, then add optional accessories for the perfect fit to match your space and training style. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks.

by Bells of Steel

Tame gym clutter with the Rack Attached Storage Basket! This isn’t your grandma’s picnic basket. It’s crafted from 14-gauge steel and built to withstand the rigors of any serious gym environment. Thanks to the rugged design, all your fitness accessories are safe inside its fortress walls. Use a couple of Utility Hooks to hang your lever belt & lifting chains from the outside of the basket for even more #spacegainz Mount it on your power rack , storage system , or wall studs. IMPORTANT : Comes standard with rack-mounting hardware for tubing with ⅝” holes.

by Bells of Steel

Ready to set a PR in home gym organization? Save space and get even more use out of your power rack by attaching a Vertical Mount Barbell Holder on the front or back of your uprights. Two bolts offer easy mounting, while an inner liner protects your barbell. The black powder coat offers rust resistance, and the 220lb max capacity can handle your barbell, even if you use it as a makeshift coat rack (please don't). Choose the Vertical Mount Barbell Holder that corresponds with your power rack measurements. Hardware included.

by Bells of Steel

Whether you've got a sprawling home gym or a cozy lifting nook, instantly reclaim valuable floor space with the Dumbbell/Kettlebell Shelf! Choose from three versatile lengths — 70”, 43”, or 30” — to elevate your weight storage and transform any area into a clutter-free fitness haven. Because tripping over kettlebells isn't a recommended warm-up. Flat mounting secures your kettlebells neatly, while an angled installation makes grabbing dumbbells a breeze. As your impulse equipment purchases multiply, this versatile shelf easily adapts to match your evolving fitness journey.

by Bells of Steel

Weighing in at a beefy 73lbs for maximum stability, the Squat Stands 3.0 can be used in home gyms or commercial settings, for instance, weightlifting clubs. Superior 1" spacing through the bench and pull zone and 2" spacing above and below allow you to select the perfect height for your j-cups, for precision lift-offs that can make the difference between a good rep and a superb rep. Trying to decide between squat stands and a power rack? Then check out Squat Stands vs Power Racks: How to Choose .

by Bells of Steel

It's time to bump up your lifting game! These non-smelly, DB (dead bounce) virgin rubber bumper plates have a thick stainless steel insert ring with 3 anchor points to prevent common bumper breakdowns. The number one advantage of bumpers is safety for the lifter. A lifter who hesitates to dump a barbell because they're afraid of damage to the floor or the equipment is more likely to get hurt. Bumpers take any worry about damage completely out of the equation.

by Bells of Steel

Sculpt your arms into a set of triumphantly terrific triceps! The Tricep Pressdown with Ergo Handgrips is compatible with any cable machine using carabiners. The rubberized grips and large ends are grippy and comfortable to hold, so you work your tris to failure without feeling like you're holding onto a wet spaghetti noodle. IMPORTANT: Requires a carabiner (not included by default) for use on your cable machine.

by Bells of Steel

With the Luxury Sit Up Mat, you’ll be looking forward to those hard-core workouts. This mat is designed to maintain your lumbar curvature so the focus stays on your core rather than letting your hip flexors take over. This lightweight, portable mat is textured to prevent slipping, so you get more out of every rep. The extra padding protects your back and tailbone, providing extra comfort on hard gym floors.

by Bells of Steel

Sick of bracing your feet on a skinny beam mid–lat pulldown? Enter the Footplate for Cable Towers & All In One Trainers: a simple, sturdy add-on that fixes one of the most annoying cable tower quirks. No bolts, no assembly, no fuss. Just pop it out of the box, set it in place, and once your feet are planted, it stays locked down tighter than your lifting belt on PR day. Small upgrade, BIG difference in comfort and stability. This grippy checkerboard steel plate slides right onto your Bells of Steel 2.3” x 2.3” (60mm) setup: Cable Tower , All-in-One Trainer , or Power Rack .

by Bells of Steel

Isolate your arms, chest & more! The Nylon Adjustable Length Single Handle is compatible with any cable machine using carabiners and is excellent for curls, shoulder raises and chest flies. The handle rotates smoothly and the grips are comfortable to hold, so you can train to failure without feeling like you're holding onto a wet spaghetti noodle. Even better, it features 5 attachment points to your carabiner to make length adjustments a breeze. IMPORTANT: Requires a carabiner (not included by default) for use on your cable machine.

by Bells of Steel

Most ab wheels wobble, flex, and occasionally remind you what your carpet tastes like. The ABsyidyan Stainless Steel Ab Roller is built on a simple idea: your ab wheel shouldn’t be the weakest thing in your gym. STAINLESS STEEL SHAFT. EXTRA-WIDE DUAL WHEEL. 500+ LB CAPACITY. No plastic axles. No wobbly single wheels. Just a rock-solid roller that keeps up when things get hard. The extra-wide dual wheel gives you a stable base on any surface—hardwood, rubber, tile, or carpet—while the non-slip tread keeps you tracking straight.

by Bells of Steel

Your college days might be over, but it's not too late to do another keg stand train like a varsity athlete. Its 1,000-pound capacity outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks. By matching the same tubing specs as many of our American competitors, you can mix and match attachments freely without needing to stick to one brand - hello, open ecosystem!

by Bells of Steel

Sculpt your arms into a set of triumphantly terrific triceps with the Fat Bar Tricep Pressdown! Whether you’re into grappling sports, arm wrestling, or just want to build your grip strength, fat bar attachments are a game-changer. Its unique design builds your grip in ways a typical cable attachment can’t match and allows for peak tricep targeting on tricep pushdowns. Compatible with any cable machine using a carabiner. IMPORTANT: Requires a carabiner (not included by default) for use on your cable machine.

by Bells of Steel

The Weight Vest turns up the burn on your bodyweight exercises, conditioning workouts, and cardio sessions. Adjustable for a snug fit, it hugs your body like your favorite hoodie but adds, well, weights. Using it is simple: slide in your desired training plates — available in 5lb, 7.5lb, 10lb, and 20lb pairs — and strap the vest on. It’s highly adjustable with thick-padded shoulder straps & raised padded areas inside, improving breathability. The weight stays close to your body, so you can focus on form.

by Bells of Steel

Upgrade your non-flat-foot Manticore (or 3"x3" with 1" holes) power racks with our flat foot support system. Grab a pair of flat feet, some reinforcement plates, and an optional cross-member to hold everything together. The flat feet come in 54" and 63" lengths, with an optional 43" flat foot crossmember to connect them for added stability. The 54" length can be paired with the 24" and 30" crossmember depths, while the 63" length can be paired with the 24", 30" and 43" depths.

by Bells of Steel

Remember the bench station at the gym you grew up going to? Two posts, open front, clean and simple. This is that, but better. The two-post setup uses one pair of 60" uprights at the back and the Converter Bench’s own front foot on the other end. Front foot stabilizers keep everything locked in place with built-in bar storage for more value. Add the j-cups and spotter arms of your choice for safe solo training that the old commercial gym benches never had. It’s less expensive than the four-post setup but gives you the same dedicated bench station experience.

by Bells of Steel