Bells of Steel USA 3x3 Cable Tower to Rack Connection Kit

The Bells of Steel Rack Junctions let you connect, expand, and customize your rack setup any way you want. Attach a Kraken cable tower, extend a pull-up bar, or build a custom storage rig. The only limit is your imagination! There are two versions: Box Junctions: Compact 3x3 uprights with keyholes on all sides. Perfect for top or side connections. Stand Junctions: Taller units with a built-in footplate for added stability and creative setups. Each junction features right-side-up and upside-down keyholes so you can bolt and rotate them in any direction.

by Bells of Steel

Connect your folding rack to wall stringers or directly to your wall studs. Wall connectors connect your power rack directly to your concrete wall, stringers, or wall studs. Hinges allow your rack to be folded away for storage. Hydra components fit true 3" x 3" uprights with 5/8" holes, while Manticore components fit true 3" x 3" tubing with 1" holes. IMPORTANT: Designed for Hydra & Manticore racks only, no racks from other brands are guaranteed to fit.

by Bells of Steel

Attaches to the front of your rack for all types of cable work from both top and bottom pulleys. Fits the 84.5" Light Commercial & Residential Rack . A durable build and 160lb capacity offer smooth reps, even when fully loaded. Each side boasts a fixed upper and lower pulley so you can curl, cross, and become a cable connoisseur. Throw your 1" or 2" weight plates on this cost-efficient option to get more for your space and moolah. IMPORTANT: Since there is no adjustable feature to this rack attachment, the Cable Crossover can only be operated from the top or bottom positions.

by Bells of Steel

Mounting gym equipment shouldn't feel like a DIY disaster waiting to happen. Whether it’s a heavy bag that’s too tricky to hang from high ceilings or gym rings and cable pulleys with a mind of their own, the Bells of Steel Utility Shackle Rack Attachment has you covered. Easily mount the Utility Shackle to a 3” x 3” power rack to keep your attachments secure. Or, mount it on a Utility Arm — maintaining full use of your rack while taking advantage of the often-overlooked side space.

by Bells of Steel

Looking to upgrade your Hydra Rack? Or build your own franken-rack? Maybe even upgrade your non-Bells of Steel Rack that's also true 3 x 3 inch with 5/8 inch holes? Crossmembers are the horizontal bars that connect the uprights of your power rack. They're easy to install and adjust, and come in different lengths and styles to suit your needs and preferences.They add stability and strength to your rack, while opening it up to more possibilities for your training. Mount band pegs, utility horns, and other rack attachments. Unless otherwise indicated, crossmembers are sold in pairs (2 pieces).

by Bells of Steel

Bid a not-so-fond farewell to impossibly tangled bands, sweat-soaked support wear, and chaotically misplaced Barbell Collars . You'll never look like one of those poor, helpless saps who can't do anything right in an infomercial again. Mount it directly to your wooden wall studs, your concrete wall, or your power rack (Hydra, Manticore or 2.3”) to keep your accessories secure, out of the way, and readily accessible for your next lifting masterpiece!

by Bells of Steel

Your squat stand was a great first date. This is the glow-up. The Squat Stand to Half Rack Conversion Kit upgrades your setup with rear uprights and crossmembers—giving you more stability, more storage, and way more ways to train, without eating up extra space. Re-racking heavy lifts feels more solid. Attachments hit different. And your rack? Way less “minimalist,” way more “do-it-all.” Load it up with plate storage, add cables, run bands, or train front and back at the same time. The Hydra ecosystem is built to grow with you—so you’re never boxed in.

by Bells of Steel

Elevate your power rack game with our premium titanized gold or black bolts—because who says luxury doesn't belong in the gym? These M16x120mm bolts are compatible with power racks with TRUE 3"x3" uprights with 5/8" holes, like our fan-favorite Hydra series . The titanized coating provides an extra layer of protection against rust and corrosion to keep your rack secure for the long haul. Sure, we're all about putting the fun in functionality, but have you tried looking real fancy? Squatting with your pinkies out while wearing a top hat? No? Well, this is the next best thing.

by Bells of Steel

Hydra Wrenches The 24mm wrench fits all bolts used in the Hydra rack line-up. BOS Logo Tag B.o.S logo plate promises a PR in pizzazz. Standard Bolt M16 - 110mm Essential for constructing sturdy and reliable 4-Post Hydra racks . Long Bolt M16 - 120mm Used specifically for the secure and stable assembly of 6-Post Hydra racks . Extra Long Bolt M16 - 130mm Designed for the reliable assembly of Folding Racks and 72" Smith Machine builds. Concrete Anchor Bolts Ideal for safely securing racks and Cable Towers to concrete floors or walls, providing superior stability for intense workouts.

by Bells of Steel

The Hydra 2-Sided Rack Builder is excellent for running highly efficient team training without taking up the floor space of a Hydra Rig. Everything that is pictured is included: 84" uprights, 30" crossmembers, 13" plate pegs and more! Additional Hydra attachments are optional. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks. By matching the same tubing specs as many of our American competitors, you can mix and match attachments freely without needing to stick to one brand - hello, open ecosystem!

by Bells of Steel

Upgrade your non-flat-foot Hydra (or 3"x3" with 5/8" holes) power racks with our flat foot support system. Grab a pair of flat feet, some reinforcement plates, and an optional cross-member to hold everything together. The flat feet come in 56" and 62" lengths, with an optional 43" flat foot crossmember to connect them for added stability. The 56" length can be paired with the 30" or 24" cross member depth, while the 62" length can be paired with the 43", 30" or 24" depth. Popular combos are 43" with a 62" flat foot for maximum roominess.

by Bells of Steel

Don't compromise on safety when it comes to your training! The Safety Strap Connectors mount to your rack uprights and act as an anchor point for safety straps. Together, they offer unparalleled protection and peace of mind, gently catching a loaded barbell without sacrificing security. IMPORTANT: Select connectors that match the upright & hole size of your power rack.

by Bells of Steel

It's time to bump up your lifting game! These non-smelly, DB (dead bounce) virgin rubber bumper plates have a thick stainless steel insert ring with 3 anchor points to prevent common bumper breakdowns. The number one advantage of bumpers is safety for the lifter. A lifter who hesitates to dump a barbell because they're afraid of damage to the floor or the equipment is more likely to get hurt. Bumpers take any worry about damage completely out of the equation.

by Bells of Steel

If Mighty Grip Plates & Dead Bounce Conflict Bumper Plates had a baby, this would be it. The Rubber Coated Iron Weight Plates feature a durable 100% virgin rubber coating that is nearly odorless, so you’ll avoid the foul smell of low-quality rubber while protecting your equipment from damage. Plus, they’ll minimize noise — in case the clangin’ & bangin’ of iron plates remind you of nails on a chalkboard (we like your shopping habits, so we’ll let this one slide). The large ergonomic handles and rubber coating improve comfort on farmer walks, back extensions, and weighted crunches.

by Bells of Steel

A barbell and a rack? Everyone has that. A Viking press landmine attachment in the corner? That's a different gym... and a different kind of shoulder day. Dust off the beater bar. Drop it into a landmine , load plates, slide the attachment over the sleeve, lock the knob. You're doing the viking press exercise in under a minute, no Strongman meet required. FOUR GRIP POSITIONS. 2 neutral, 2 regular. Narrow or wide, palms in or palms forward: press the way your shoulders actually want to move.

by Bells of Steel

Remember the bench station at the gym you grew up going to? Two posts, open front, clean and simple. This is that, but better. The two-post setup uses one pair of 60" uprights at the back and the Converter Bench’s own front foot on the other end. Front foot stabilizers keep everything locked in place. Add your choice of j-cups and spotter arms for safe solo training that the old commercial gym benches never had. It’s less expensive than the four-post setup but gives you the same dedicated bench station experience.

by Bells of Steel

Sick of bracing your feet on a skinny beam mid–lat pulldown? Enter the Footplate for Cable Towers & All In One Trainers: a simple, sturdy add-on that fixes one of the most annoying cable tower quirks. No bolts, no assembly, no fuss. Just pop it out of the box, set it in place, and once your feet are planted, it stays locked down tighter than your lifting belt on PR day. Small upgrade, BIG difference in comfort and stability. This grippy checkerboard steel plate slides right onto your Bells of Steel 2.3” x 2.3” (60mm) setup: Cable Tower , All-in-One Trainer , or Power Rack .

by Bells of Steel

Whether you own a lavish home gym or an expansive training facility, fixed barbells are the pinnacle of convenience. These bad boys come in 10 preset weight increments, so you can quickly grab the perfect weight for your workout without doing any plate math to save yourself time and mental energy. They feature two shaft styles: an iconic straight shaft and a joint-friendly curved design. Both styles boast a light knurling that's perfect for those classic barbell exercises.

by Bells of Steel

Weight is weight, right? But what if I told you your sloppy, 45lb plates you got for your 16th birthday from the local big box store were lying to you? The process of casting molten hot iron into molds can be fickle. Machined iron plates are cast in a specialty casting factory with over 40 years of experience, then finished on a lathe that shaves off excessive weight from the back of the plate, followed by polishing and machining edges for an even smoother, more aesthetic plate. The machined plates have a guaranteed tolerance of +/- 1% for 45, 35, and 25 and +/- 3% for 15, 10, 5, and 2.5.

by Bells of Steel

Sculpt your arms into a set of triumphantly terrific triceps with the Fat Bar Tricep Pressdown! Whether you’re into grappling sports, arm wrestling, or just want to build your grip strength, fat bar attachments are a game-changer. Its unique design builds your grip in ways a typical cable attachment can’t match and allows for peak tricep targeting on tricep pushdowns. Compatible with any cable machine using a carabiner. IMPORTANT: Requires a carabiner (not included by default) for use on your cable machine.

by Bells of Steel

So you think you shouldn’t lift heavier than you can hold? Pfffft . Get a GRIP. Sure, we’re all for improving your grip s trength and * ahem * getting your hands dirty, but let’s be real: your grip shouldn’t limit you from growing the LARGEST muscles in your body. The Figure 8 design provides an ultra-fast and easy setup, with durable quality made to last. Studies showed that using straps leads to greater perceived grip security and power — and there’s nothing we weightlifters more than a placebo effect. I’ll take my questionable supps shaken, not stirred, thanks.

by Bells of Steel

Sculpt your arms into a set of triumphantly terrific triceps! The Tricep Pressdown with Ergo Handgrips is compatible with any cable machine using carabiners. The rubberized grips and large ends are grippy and comfortable to hold, so you work your tris to failure without feeling like you're holding onto a wet spaghetti noodle. IMPORTANT: Requires a carabiner (not included by default) for use on your cable machine.

by Bells of Steel

Ankle straps are widely popular in the glute-training community for kickbacks, donkey kicks and lateral leg raises. But that's not all they're good for! With 2 d-ring attachment points, the ankle straps are great for laying knee tucks and leg lifts if you don't have access to a pull-up bar or find your grip is the limiting factor and don't care for Hanging Ab Straps (we won't take it personally). Wear them on your wrists to perform shoulder-pumping lateral raises & chest flies on a Cable Tower or a better mind-muscle connection or to work around a hand injury. Sold as a pair.

by Bells of Steel

The Flat Foot Power Rack is where classic design and rock-solid stability team up with a chalky fist bump of swoleship. Its 1,000-pound capacity outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks. By matching the same tubing specs as many of our American competitors, you can mix and match attachments freely without needing to stick to one brand - hello, open ecosystem!

by Bells of Steel