Bells of Steel Hydra Flat Foot Components

Upgrade your non-flat-foot Manticore (or 3"x3" with 1" holes) power racks with our flat foot support system. Grab a pair of flat feet, some reinforcement plates, and an optional cross-member to hold everything together. The flat feet come in 54" and 63" lengths, with an optional 43" flat foot crossmember to connect them for added stability. The 54" length can be paired with the 24" and 30" crossmember depths, while the 63" length can be paired with the 24", 30" and 43" depths.

by Bells of Steel

Looking to upgrade your Hydra Rack? Or build your own franken-rack? Maybe even upgrade your non-Bells of Steel Rack that's also true 3 x 3 inch with 5/8 inch holes? Crossmembers are the horizontal bars that connect the uprights of your power rack. They're easy to install and adjust, and come in different lengths and styles to suit your needs and preferences.They add stability and strength to your rack, while opening it up to more possibilities for your training. Mount band pegs, utility horns, and other rack attachments. Unless otherwise indicated, crossmembers are sold in pairs (2 pieces).

by Bells of Steel

The Flat Foot Power Rack is where classic design and rock-solid stability team up with a chalky fist bump of swoleship. Its 1,000-pound capacity outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks. By matching the same tubing specs as many of our American competitors, you can mix and match attachments freely without needing to stick to one brand - hello, open ecosystem!

by Bells of Steel

Connect your folding rack to wall stringers or directly to your wall studs. Wall connectors connect your power rack directly to your concrete wall, stringers, or wall studs. Hinges allow your rack to be folded away for storage. Hydra components fit true 3" x 3" uprights with 5/8" holes, while Manticore components fit true 3" x 3" tubing with 1" holes. IMPORTANT: Designed for Hydra & Manticore racks only, no racks from other brands are guaranteed to fit.

by Bells of Steel

The Flat Foot Power Rack is where classic design and rock-solid stability team up with a chalky fist bump of swoleship. Its 1,000-pound capacity outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks. By matching the same tubing specs as many of our American competitors, you can mix and match attachments freely without needing to stick to one brand - hello, open ecosystem!

by Bells of Steel

Plate Tree crossmembers are the horizontal bars along the bottom of your Hydra Plate Tree. They’re easy to install, and they add stability and strength while opening it up to more possibilities for storage. IMPORTANT: Requires two 24mm wrenches to install (not included by default). Correctly sized box-end, adjustable & socket wrenches are suitable alternatives.

by Bells of Steel

The Hydra 2-Sided Rack Builder is excellent for running highly efficient team training without taking up the floor space of a Hydra Rig. Everything that is pictured is included: 84" uprights, 30" crossmembers, 13" plate pegs and more! Additional Hydra attachments are optional. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks. By matching the same tubing specs as many of our American competitors, you can mix and match attachments freely without needing to stick to one brand - hello, open ecosystem!

by Bells of Steel

Hydra Wrenches The 24mm wrench fits all bolts used in the Hydra rack line-up. BOS Logo Tag B.o.S logo plate promises a PR in pizzazz. Standard Bolt M16 - 110mm Essential for constructing sturdy and reliable 4-Post Hydra racks . Long Bolt M16 - 120mm Used specifically for the secure and stable assembly of 6-Post Hydra racks . Extra Long Bolt M16 - 130mm Designed for the reliable assembly of Folding Racks and 72" Smith Machine builds. Concrete Anchor Bolts Ideal for safely securing racks and Cable Towers to concrete floors or walls, providing superior stability for intense workouts.

by Bells of Steel

Looking to upgrade your Manticore Rack? Or build your own franken-rack? Maybe even upgrade your non-Bells of Steel Rack that's also true 3 x 3 inch with 1-inch holes?Uprights are the vertical bars that connect the crossmembers of your power rack. They're easy to install and come in different lengths and styles to suit your needs and preferencesThey add functionality to your rack by allowing you to mount rack attachments like a seal row pad, lever arms, and more.Unless otherwise indicated, uprights are sold in pairs (2 pieces) and do not include hardware.

by Bells of Steel

Ready to set a PR in home gym organization? Save space and get even more use out of your Hydra power rack or Hydra bumper plate tree by attaching this barbell holder to your flat foot system or plate tree crossmember. Two bolts offer easy mounting, while an inner liner protects your barbell. The black powder coat offers rust resistance, and the 220lb max capacity can handle your barbell, even if you use it as a makeshift coat rack (please don't). Hardware included. Check out the Vertical Barbell Holder for an upright-mounting version.

by Bells of Steel

The Rear Base Stabilizer adds serious stability to your power rack. It also makes a fine seat to ponder the deepest questions in life like, "Is sumo really cheating?" The Hydra version fits the Hydra power rack line-up and select non-B.o.S. 49-inch wide racks with true 3" x 3" uprights & 1" holes - with two of those uprights holes spaced 6" apart. The Manticore version fits the Manticore power rack line-up and select non-B.o.S. 49-inch wide racks with true 3" x 3" uprights & 1-inch holes - with two of those uprights holes spaced 6" apart.

by Bells of Steel

Like a mullet haircut, the 6 Post Power Rack is all business-in-the-front, party-in-the-back. Its 1,000-pound capacity outlasts heavy pull-ups, handles big bench presses and withstands you squatting a league of ancient Giants (pics or it didn't happen). As a beefed-up version of our classic 4 Post Rack , it'll store your weight plate collection and maximize your space - an organized being is an all-powerful being. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks.

by Bells of Steel

The Flat Foot Power Rack is where classic design and rock-solid stability team up with a chalky fist bump of swoleship. Its 1,000-pound capacity outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks. By matching the same tubing specs as many of our American competitors, you can mix and match attachments freely without needing to stick to one brand - hello, open ecosystem!

by Bells of Steel

Remember the bench station at the gym you grew up going to? Two posts, open front, clean and simple. This is that, but better. The two-post setup uses one pair of 60" uprights at the back and the Converter Bench’s own front foot on the other end. Front foot stabilizers keep everything locked in place. Add your choice of j-cups and spotter arms for safe solo training that the old commercial gym benches never had. It’s less expensive than the four-post setup but gives you the same dedicated bench station experience.

by Bells of Steel

Sculpt your arms into a set of triumphantly terrific triceps! The Tricep Pressdown with Ergo Handgrips is compatible with any cable machine using carabiners. The rubberized grips and large ends are grippy and comfortable to hold, so you work your tris to failure without feeling like you're holding onto a wet spaghetti noodle. IMPORTANT: Requires a carabiner (not included by default) for use on your cable machine.

by Bells of Steel

Upgrade your non-flat-foot Manticore (or 3"x3" with 1" holes) power racks with our flat foot support system. Grab a pair of flat feet, some reinforcement plates, and an optional cross-member to hold everything together. The flat feet come in 54" and 63" lengths, with an optional 43" flat foot crossmember to connect them for added stability. The 54" length can be paired with the 24" and 30" crossmember depths, while the 63" length can be paired with the 24", 30" and 43" depths.

by Bells of Steel

Remember the bench station at the gym you grew up going to? Two posts, open front, clean and simple. This is that, but better. The two-post setup uses one pair of 60" uprights at the back and the Converter Bench’s own front foot on the other end. Front foot stabilizers keep everything locked in place with built-in bar storage for more value. Add the j-cups and spotter arms of your choice for safe solo training that the old commercial gym benches never had. It’s less expensive than the four-post setup but gives you the same dedicated bench station experience.

by Bells of Steel

The B.o.S. Women's Barbell 3.0 is dollar-for-dollar the best women's weightlifting barbell you can buy. Olympic weightlifting isn't just a sport, it's an art. This requires a bar to match your skill and strength - the B.o.S. Women's Barbell 3.0 is that masterpiece. In fact, it won Garage Gym Reviews' Best Olympic Weightlifting Bar for Women in 2023! Its 25mm shaft, needle bearings, and hard chrome finish deliver a smooth spin, a lively whip, and a secure grip. And while not IWF approved, you can still use it to practice for the big stage. Looking for a multi-purpose bar instead?

by Bells of Steel

The perfect posterior chain pulverizer, the Glute Ham Slider allows you to tuck your heels or toes into to perform a multitude of hamstring blasting movements or use the handles for ab rolls and other creative upper body exercises. Use the eyelet to connect to a cable machine for even more versatility. The heavy-duty wheels and black powder coat provide durability, rust resistance, and a smooth ride with a space-efficient design that makes storage simple.

by Bells of Steel

If you want bragging rights for having the nicest plates on the block, then these Urethane Change Plates are a must-have. Due to their urethane construction, colors have more "pop" to them. This makes lettering and numbers appear crisper, adding a noticeable level of professionalism that'll make others go "DAAAAAMNN!" Urethane is also a much harder material than rubber, so these urethane change plates are a huge step above the durability of rubber bumpers — even our competition bumper plates can't match their toughness.

by Bells of Steel

Out-train back pain and upper body mobility limitations while building lower body strength. The Belt Squat Machine is space-efficient and versatile, unlocking endless exercises for your home gym at an unbeatable price. Built like a tank, this beast boasts an impressive 700lb capacity (step aside, Hip Thrust Machine ). Plus, its innovative design features commercial-grade Zerk bearings and band pegs for improving your lockout strength. Despite its beastly strength, this strength machine is a gentle giant in your gym space.

by Bells of Steel

Looking to upgrade your Hydra Rack? Or build your own franken-rack? Maybe even upgrade your non-Bells of Steel Rack that's also true 3 x 3 inch with 5/8 inch holes?Uprights are the vertical bars that connect the crossmembers of your power rack. They're easy to install and come in different lengths and styles to suit your needs and preferencesThey add functionality to your rack by allowing you to mount rack attachments like a seal row pad, lever arms, and more.Unless otherwise indicated, uprights are sold in pairs (2 pieces) and do not include hardware.

by Bells of Steel

These commercial-grade dumbbells are hex -ceptionally priced. Our hex dumbbells are made of 50% virgin and 50% recycled rubber — the perfect blend of environmentally-friendly and durable materials to reduce the noise and impact they make against your home gym flooring . Their chrome-plated handles are resistant to corrosion and rust and are ergonomically shaped for a comfortable grip. Plus, they feature fully-welded heads to maximize longevity. Prefer a consistently straight handle to hold? Straight Handle Dumbbells are also available.

by Bells of Steel

Protect your floors and your gear from big lifts with easy-to-clean recycled rubber flooring. Sold in 4' x 6' sheets for maximum floor coverage (which is great, because these heavy-duty 33lb-37.5lb mats are a pain in the glutes to move). Choose between 6mm or 8mm thick to suit your space. IMPORTANT: We are unable to ship these by UPS, so if your total order is less than 500lbs, we will be unable to ship the mats to you. Sold in single sheets.

by Bells of Steel