Bells of Steel Kraken Weight Stack Shroud (Single Side)

Don't compromise on safety when it comes to your training. These Flip Down Safeties offer the confidence and reliability of a spotter without the weird-feeling personal space invasion. Select the safeties that correspond with the depth and hole sizing of your power rack.

by Bells of Steel

Whether you've got a sprawling home gym or a cozy lifting nook, instantly reclaim valuable floor space with the Dumbbell/Kettlebell Shelf! Choose from three versatile lengths — 70”, 43”, or 30” — to elevate your weight storage and transform any area into a clutter-free fitness haven. Because tripping over kettlebells isn't a recommended warm-up. Flat mounting secures your kettlebells neatly, while an angled installation makes grabbing dumbbells a breeze. As your impulse equipment purchases multiply, this versatile shelf easily adapts to match your evolving fitness journey.

by Bells of Steel

Don't compromise on safety when it comes to your training. Safety Straps offer unparalleled protection and peace of mind, gently catching a loaded barbell without sacrificing security. Select the safeties that correspond with the depth and hole sizing of your power rack.

by Bells of Steel

Bid a not-so-fond farewell to impossibly tangled bands, sweat-soaked support wear, and chaotically misplaced Barbell Collars . You'll never look like one of those poor, helpless saps who can't do anything right in an infomercial again. Mount it directly to your wooden wall studs, your concrete wall, or your power rack (Hydra, Manticore or 2.3”) to keep your accessories secure, out of the way, and readily accessible for your next lifting masterpiece!

by Bells of Steel

Mounting gym equipment shouldn't feel like a DIY disaster waiting to happen. Whether it’s a heavy bag that’s too tricky to hang from high ceilings or gym rings and cable pulleys with a mind of their own, the Bells of Steel Utility Shackle Rack Attachment has you covered. Easily mount the Utility Shackle to a 3” x 3” power rack to keep your attachments secure. Or, mount it on a Utility Arm — maintaining full use of your rack while taking advantage of the often-overlooked side space.

by Bells of Steel

Don't compromise on safety when it comes to your training! The Safety Strap Connectors mount to your rack uprights and act as an anchor point for safety straps. Together, they offer unparalleled protection and peace of mind, gently catching a loaded barbell without sacrificing security. IMPORTANT: Select connectors that match the upright & hole size of your power rack.

by Bells of Steel

Designed for the powerlifting purist or swolo artist who prefers to train alone, this adjustable Monolift Attachment delivers the stability, safety, and slick functionality of a full monolift setup, without eating up your rack space or wallet. The cantilever-style swing-back design improves bar clearance for squats and presses, so you can unrack and lift with zero wasted motion. Once the bar’s up, the arms swing cleanly out of the way, giving you more room to squat deep and lift heavy without smashing into hooks.

by Bells of Steel

Don't compromise on safety when it comes to your training. These Pin Pipe Safeties offer unparalleled protection and peace of mind at a reasonable cost. Select the safeties that correspond with the depth and hole sizing of your power rack.

by Bells of Steel

The Kraken is a compact rack-mounted cable system, turning your 3” x 3” 4-post power rack with ⅝” or 1” holes into a dual-handle cable tower with 5lbs to 210+lbs of resistance! All of this while maintaining the use of your barbell and rack attachments . It comes in two versions: - Plate-Loaded: use your weight plates to save big bucks - Weight Stack: a convenient 210-pound stack for quick, no-fuss adjustments Thanks to the knurled handle, nylon rollers and chrome-coated pop pins, the trolleys are adjustable with a single hand.

by Bells of Steel

Tame gym clutter with the Rack Attached Storage Basket! This isn’t your grandma’s picnic basket. It’s crafted from 14-gauge steel and built to withstand the rigors of any serious gym environment. Thanks to the rugged design, all your fitness accessories are safe inside its fortress walls. Use a couple of Utility Hooks to hang your lever belt & lifting chains from the outside of the basket for even more #spacegainz Mount it on your power rack , storage system , or wall studs. IMPORTANT : Comes standard with rack-mounting hardware for tubing with ⅝” holes.

by Bells of Steel

The Kraken is a compact rack-mounted cable system, turning your 3” x 3” 6-post power rack with ⅝” holes into a dual-handle cable tower with 5lbs to 210+lbs of resistance! All of this while maintaining the use of your barbell and rack attachments . It comes in two versions: - Plate-Loaded: use your weight plates to save big bucks - Weight Stack: a convenient 210-pound stack for quick, no-fuss adjustments Thanks to the knurled handle, nylon rollers and chrome-coated pop pins, the trolleys are adjustable with a single hand.

by Bells of Steel

These multipurpose, space-efficient blocks take up less than 2' x 2' in your Lifting Paradise. The tongue and groove design stacks securely, so you can confidently block pulls, do jerk work, step-ups, tricep dips, or stand on them for deficit deadlifts. Sold in pairs so you can stack 'em and get to work on your next PR.

by Bells of Steel

While we value honesty in a relationship, your hips should actually lie sometimes — particularly whenever (wherever) you’re doing sit-ups. The Sit Up Mat is designed to maintain your lumbar curvature so the focus stays on your core rather than letting your hip flexors take over. This lightweight, portable mat is textured to prevent slipping, so you get more out of every rep. You can also use it for cushioning during floor work or handstand push-ups, a makeshift yoga block, or a pillow when you get sent to sleep in your garage gym after buying yet another B.o.S. Bestseller . Feeling boujie?

by Bells of Steel

Sculpt your arms into a set of triumphantly terrific triceps! The Tricep Pressdown with Ergo Handgrips is compatible with any cable machine using carabiners. The rubberized grips and large ends are grippy and comfortable to hold, so you work your tris to failure without feeling like you're holding onto a wet spaghetti noodle. IMPORTANT: Requires a carabiner (not included by default) for use on your cable machine.

by Bells of Steel

It's time to bump up your lifting game! These non-smelly, DB (dead bounce) virgin rubber bumper plates have a thick stainless steel insert ring with 3 anchor points to prevent common bumper breakdowns. The number one advantage of bumpers is safety for the lifter. A lifter who hesitates to dump a barbell because they're afraid of damage to the floor or the equipment is more likely to get hurt. Bumpers take any worry about damage completely out of the equation.

by Bells of Steel

Made of recycled rubber powder, this ultra-smooth rubber roll is perfect for covering your whole home gym or commercial gym. With a home gym you get the joy of adding flooring around awkwardly shaped objects like furnaces, vents, and load-bearing walls. No reason to panic, though! A sharp utility knife and some careful trimming will save the day. Its easy-to-clean rubber surface simply needs a quick once-over with a mop, and you're good to go. And while mopping is a great warm-up, maybe wait until after you squat so you don't turn your PR into an ER.

by Bells of Steel

Isolate your arms, chest & more! The Adjustable Aluminum Handles are compatible with any cable machine using carabiners and are excellent for curls, shoulder raises, chest flies, and much more. The 5.25" wide handles rotate smoothly and the aluminum coating will help keep those pesky rust fairies away. Adjust them to the perfect length using the five heavy-duty d-rings. IMPORTANT: Requires carabiners (not included by default) for use on your cable machine.

by Bells of Steel

A replacement seat pad (smaller pad, for the butt) for the Buzzsaw Bench . Compatible with: - Buzzsaw Bench (BSAW-BEN) - Buzzsaw Bench (BLUT-BSAW2-BEN) - Buzzsaw Bench (SPU-BSAW2-BEN) - Buzzsaw Bench (BSAW2-BEN)

by Bells of Steel

With this Half Rack, your home gym will be so optimized that they'll be calling you The Jacked Effi-cionado. Its 1,000-pound capacity outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks. By matching the same tubing specs as many of our American competitors, you can mix and match attachments freely without needing to stick to one brand - hello, open ecosystem!

by Bells of Steel

Sick of getting bitten by your barbell? Muzzle it up with one of these ergonomic Barbell Pads! Choose from a range of colors and secure it quickly with the included straps. The cushy 1.25" thick pad is 17.3" long to keep you covered and bruise-free as you squat, hip thrust, lunge, and more.

by Bells of Steel

Remember the bench station at the gym you grew up going to? Two posts, open front, clean and simple. This is that, but better. The two-post setup uses one pair of 60" uprights at the back and the Converter Bench’s own front foot on the other end. Front foot stabilizers keep everything locked in place. Add your choice of j-cups and spotter arms for safe solo training that the old commercial gym benches never had. It’s less expensive than the four-post setup but gives you the same dedicated bench station experience.

by Bells of Steel

Looking to upgrade your Hydra Rack? Or build your own franken-rack? Maybe even upgrade your non-Bells of Steel Rack that's also true 3 x 3 inch with 5/8 inch holes?Uprights are the vertical bars that connect the crossmembers of your power rack. They're easy to install and come in different lengths and styles to suit your needs and preferencesThey add functionality to your rack by allowing you to mount rack attachments like a seal row pad, lever arms, and more.Unless otherwise indicated, uprights are sold in pairs (2 pieces) and do not include hardware.

by Bells of Steel

If you want bragging rights for having the nicest plates on the block, then these Urethane Change Plates are a must-have. Due to their urethane construction, colors have more "pop" to them. This makes lettering and numbers appear crisper, adding a noticeable level of professionalism that'll make others go "DAAAAAMNN!" Urethane is also a much harder material than rubber, so these urethane change plates are a huge step above the durability of rubber bumpers — even our competition bumper plates can't match their toughness.

by Bells of Steel

Weighing in at a beefy 73lbs for maximum stability, the Squat Stands 3.0 can be used in home gyms or commercial settings, for instance, weightlifting clubs. Superior 1" spacing through the bench and pull zone and 2" spacing above and below allow you to select the perfect height for your j-cups, for precision lift-offs that can make the difference between a good rep and a superb rep. Trying to decide between squat stands and a power rack? Then check out Squat Stands vs Power Racks: How to Choose .

by Bells of Steel