Bells of Steel Rack Attached Basketball Hoop w/ Ball

Mounting gym equipment shouldn't feel like a DIY disaster waiting to happen. Whether it’s a heavy bag that’s too tricky to hang from high ceilings or gym rings and cable pulleys with a mind of their own, the Bells of Steel Utility Shackle Rack Attachment has you covered. Easily mount the Utility Shackle to a 3” x 3” power rack to keep your attachments secure. Or, mount it on a Utility Arm — maintaining full use of your rack while taking advantage of the often-overlooked side space.

by Bells of Steel

Tame gym clutter with the Rack Attached Storage Basket! This isn’t your grandma’s picnic basket. It’s crafted from 14-gauge steel and built to withstand the rigors of any serious gym environment. Thanks to the rugged design, all your fitness accessories are safe inside its fortress walls. Use a couple of Utility Hooks to hang your lever belt & lifting chains from the outside of the basket for even more #spacegainz Mount it on your power rack , storage system , or wall studs. IMPORTANT : Comes standard with rack-mounting hardware for tubing with ⅝” holes.

by Bells of Steel

Need a spot to hang your punching bag but fresh out of basement space? The Utility Arm mounts right onto your power rack or wall stud, transforming it into a full-on combat zone. Or, if you're more of a lover than a fighter, it doubles as moderate barbell , weight plate and/or accessory storage to keep your gym gear within arm's reach (literally). Equipped with 1" holes & 5/8" keyholes, the Utility Arm plays nice with Manticore & Hydra rack attachments , making it a true jack-of-all-trades. And if you're worried about space, don't sweat it!

by Bells of Steel

Like a new parent, the Fixed Barbell Rack will have you showing off your babies with pride. Store up to 10 barbells with a space-efficient, easy-to-access design. This high-touch storage system fits various brands of fixed barbells, so you don't have to marry Bells of Steel (but you should; we're a catch.) The storage hooks are 35.5″ apart, so non-Bells of Steel barbells will also fit as long as the shaft of your bars is at least 36″ long. The Fixed Barbell Rack can hold fixed barbells or traditional Olympic barbells .

by Bells of Steel

Store a barbell above your power rack, converting it into a useable pull-up station - for smarter storage AND a bigger back. The 3D-printed Hydra Barbell Holder Rack Attachment is made to fit perfectly on true 3" x 3" tubing with 5/8" holes but will fit smaller racks with a DIY shim. With a 500lb capacity, this versatile storage solution will hold barbells up to 32mm in diameter. Place your barbell across the power rack for a makeshift pull-up station, ideal for lifters with a Lat Pulldown attachment.

by Bells of Steel

Bid a not-so-fond farewell to impossibly tangled bands, sweat-soaked support wear, and chaotically misplaced Barbell Collars . You'll never look like one of those poor, helpless saps who can't do anything right in an infomercial again. Mount it directly to your wooden wall studs, your concrete wall, or your power rack (Hydra, Manticore or 2.3”) to keep your accessories secure, out of the way, and readily accessible for your next lifting masterpiece!

by Bells of Steel

The Utility Hook is the smallest—but mightiest—gym storage solution. This solid steel s-hook easily slides into tubing holes up to 11 gauge (2.9mm thick). Organize your cable attachments along the center upright of your All-in-One Trainer . Hang lifting chains off the sides of the rear upright on your Cable Tower . Store your barbell across two hooks on a 76" wide Hydra Universal Storage System. And this is just the beginning. Beyond your gym's space restrictions, the only limit is your creativity. Don't be surprised if you get hooked .

by Bells of Steel

This nifty wall mounted barbell holder lets you store your bars horizontally on your wall. It gives your bars the center-piece flair they deserve while giving you more room for activities — ahem, exercise. HDPE plastic lining protects the knurling on your barbell for a lifetime of lifting pleasure. Not so handy? No worries! All you need to install is a level and some basic tools. We highly recommend mounting it on your wall studs or using a stringer, but wall anchors are included as well as a third option.

by Bells of Steel

Ready to set a PR in home gym organization? Save space and get even more use out of your power rack by attaching a Vertical Mount Barbell Holder on the front or back of your uprights. Two bolts offer easy mounting, while an inner liner protects your barbell. The black powder coat offers rust resistance, and the 220lb max capacity can handle your barbell, even if you use it as a makeshift coat rack (please don't). Choose the Vertical Mount Barbell Holder that corresponds with your power rack measurements. Hardware included.

by Bells of Steel

You may be more than a pretty face, but dropping a loaded barbell while benching certainly won’t improve things. Stay safe while benching or squatting with the heavy-duty Spotter Arms Attachment! Or use them as a secondary squat/bench station for barbell supersets! UHMW lining protects your barbell from damage, while the Manticore version boasts extra UHMW to keep your rack uprights in tip-top shape. - 60mm version: compatible with our 60mm racks and non-B.o.S. 2.3" x 2.3" racks with 5/8" holes. - Hydra version: compatible with our Hydra racks and non-B.o.S.

by Bells of Steel

Don't compromise on safety when it comes to your training! The Safety Strap Connectors mount to your rack uprights and act as an anchor point for safety straps. Together, they offer unparalleled protection and peace of mind, gently catching a loaded barbell without sacrificing security. IMPORTANT: Select connectors that match the upright & hole size of your power rack.

by Bells of Steel

The Hydra 2-Sided Rack Builder is excellent for running highly efficient team training without taking up the floor space of a Hydra Rig. Everything that is pictured is included: 84" uprights, 30" crossmembers, 13" plate pegs and more! Additional Hydra attachments are optional. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks. By matching the same tubing specs as many of our American competitors, you can mix and match attachments freely without needing to stick to one brand - hello, open ecosystem!

by Bells of Steel

Broaden the weight range of your adjustable kettlebell to 9-11.5kg! This plastic bottom shell weighs just 0.7kg (1.5lb), making your empty Adjustable Kettlebell as light as 9kg (19.6lb). That's 3kg less than an empty full-steel version! Access the 9.5-11.5kg (20-25lb) increments using your kettlebell plates. The lighter range is great for single-arm exercises or beginners who don't want to shell out the money for a lighter kettlebell . Weight increments: - 9kg (empty) - 9.5kg - 10kg - 10.5kg - 11kg - 11.5kg IMPORTANT: Warranty is void if dropped.

by Bells of Steel

Adjustable jump rope with a 10' max length and ergonomic handles so you can crush your cardio and plyo training. Includes two cable types and a convenient storage bag so you can double under your way to cardio dominance.

by Bells of Steel

Wall-mounted Foam Roller Storage saves floor space, is adaptable to any foam roller length, and fits foam rollers up to 6" in diameter. Designed to work like a can dispenser of ye olden days of the 1980s, this storage system will keep your foam rollers neatly stacked and off of the floor, preventing any mishaps that set you a PR in medical bills. IMPORTANT: Mounting hardware is included. Brackets must be securely mounted to a wall stud or concrete wall for user and equipment safety.

by Bells of Steel

Bid a not-so-fond farewell to impossibly tangled bands, sweat-soaked support wear, and chaotically misplaced Barbell Collars . You'll never look like one of those poor, helpless saps who can't do anything right in an infomercial again. Mount it directly to your wooden wall studs, your concrete wall, or your power rack (Hydra, Manticore or 2.3”) to keep your accessories secure, out of the way, and readily accessible for your next lifting masterpiece!

by Bells of Steel

Sculpt your arms into a set of triumphantly terrific triceps! The Tricep Pressdown with Ergo Handgrips is compatible with any cable machine using carabiners. The rubberized grips and large ends are grippy and comfortable to hold, so you work your tris to failure without feeling like you're holding onto a wet spaghetti noodle. IMPORTANT: Requires a carabiner (not included by default) for use on your cable machine.

by Bells of Steel

If you want bragging rights for having the nicest plates on the block, then these Urethane Change Plates are a must-have. Due to their urethane construction, colors have more "pop" to them. This makes lettering and numbers appear crisper, adding a noticeable level of professionalism that'll make others go "DAAAAAMNN!" Urethane is also a much harder material than rubber, so these urethane change plates are a huge step above the durability of rubber bumpers — even our competition bumper plates can't match their toughness.

by Bells of Steel

Looking to upgrade your Hydra Rack? Or build your own franken-rack? Maybe even upgrade your non-Bells of Steel Rack that's also true 3 x 3 inch with 5/8 inch holes?Uprights are the vertical bars that connect the crossmembers of your power rack. They're easy to install and come in different lengths and styles to suit your needs and preferencesThey add functionality to your rack by allowing you to mount rack attachments like a seal row pad, lever arms, and more.Unless otherwise indicated, uprights are sold in pairs (2 pieces) and do not include hardware.

by Bells of Steel

Upgrade your non-flat-foot Manticore (or 3"x3" with 1" holes) power racks with our flat foot support system. Grab a pair of flat feet, some reinforcement plates, and an optional cross-member to hold everything together. The flat feet come in 54" and 63" lengths, with an optional 43" flat foot crossmember to connect them for added stability. The 54" length can be paired with the 24" and 30" crossmember depths, while the 63" length can be paired with the 24", 30" and 43" depths.

by Bells of Steel

The Utility Horn easily mounts on your rack for quick access to your Olympic weight plates , bands, or chains — whatever you need handy up to 100lbs (or 132lbs for Manticore). It keeps your stuff off the floor to give you more room to smash your goals. The cotter pin offers extra security and stability while making it easy to move around until you find the perfect spot. Plus, the black powder coating provides rust resistance.

by Bells of Steel

The perfect posterior chain pulverizer, the Glute Ham Slider allows you to tuck your heels or toes into to perform a multitude of hamstring blasting movements or use the handles for ab rolls and other creative upper body exercises. Use the eyelet to connect to a cable machine for even more versatility. The heavy-duty wheels and black powder coat provide durability, rust resistance, and a smooth ride with a space-efficient design that makes storage simple.

by Bells of Steel

Wickedly precise and boldly colored, the Competition Bumper Plates are the perfect calibrated plates for Olympic lifting. These competition bumper plates don't just look amazing, they also closely align with IWF specs and outperform all-black bumpers . While they're not IWF approved, they do check the key boxes: 450mm diameter, color-coded, and guaranteed to +/- 0.1% of the claimed weight. The galvanized center hub with its co-molded steel collar won't spin or break from the rubber and uses an innovative method to securely lock the bolts in place.

by Bells of Steel

It's time to bump up your lifting game. These crumb bumper plates have a thick stainless steel insert ring with 3 anchor points to prevent common bumper breakdowns. The crumb material is quieter than urethane bumpers. Ideal for lifters who don't have a platform and features coloured flecks for easier weight identification. The number one advantage of bumpers is safety for the lifter. A lifter who hesitates to dump a bad lift because they're afraid of damage to the floor or the equipment is more likely to get hurt. Bumpers take any worry about damage completely out of the equation.

by Bells of Steel