Bells of Steel Aluminum Pulley Wheels & Upgrade Kits

Two replacement cables for the Plate Loaded Lat Pulldown Low Row Machine. Compactible with: - Plate-Loaded Lat Pulldown Low Row Machine (PLT-LAT-MA)

by Bells of Steel

Two replacement cables for the Selectorized Lat Pulldown Low Row Machine. Compatible with: - Weight Stack/Selectorized Lat Pulldown Low Row Machine (LAT-MA-SET)

by Bells of Steel

A multi-purpose pulley system that attaches to the back of your rack allowing you to do seated rows, lat pulldowns, biceps curls, and hundreds of other cable-based exercises. Upgrade to buttery-smooth pulls with the Aluminum Pulley Upgrade Pack ! Includes padded leg crossbar. IMPORTANT: This Rack Lat Pulldown / Low Row Attachment ONLY fits on the 84.5″ Light Commercial Rack and 84.5″ Residential Rack — it does NOT fit on our shorter 72″ models.

by Bells of Steel

Perform tricep pushdowns, lat pulldowns, low rows and more using this portable and inexpensive Cable Pulley. With an unbelievable 440lb weight plate capacity, this cable pulley can be anchored to any power rack or stand-alone pull-up bar and tucked away when not in use. If you don't have the space or budget for a full Cable Machine , this is the solution. Grab two cable pulleys and connect them together for a low row setup and unlock curls, tricep extensions, low rows, pull throughs, and more. Add an ankle strap to add glute work to the mix. At this price, you can't afford NOT to get two!

by Bells of Steel

Attaches to the front of your rack for all types of cable work from both top and bottom pulleys. Fits the 84.5" Light Commercial & Residential Rack . A durable build and 160lb capacity offer smooth reps, even when fully loaded. Each side boasts a fixed upper and lower pulley so you can curl, cross, and become a cable connoisseur. Throw your 1" or 2" weight plates on this cost-efficient option to get more for your space and moolah. IMPORTANT: Since there is no adjustable feature to this rack attachment, the Cable Crossover can only be operated from the top or bottom positions.

by Bells of Steel

This 2-to-1 Cable Adapter connects the two cables together, upgrading the pull ratio from 2:1 to an incredible 1:1 ratio - making 100 static pounds feel EXACTLY like 100 pounds! With it, you'll be able to use your Cable Tower to its full potential without causing unnecessary wear on the cables. Guaranteed to fit Bells of Steel Cable Towers only. Included by default with the current model of the Weight Stack Cable Towers & Plate-Loaded Cable Towers. IMPORTANT: The short adapter fits new (post 2025) Cable Towers with laser engraved numbers.

by Bells of Steel

The Partner pulley is compact and light, yet ensures excellent efficiency thanks to its aluminum sheave mounted on sealed ball bearings. Features Extremely…

Two replacement cables for 84" Hydra/Manticore Lat Pulldown Attachment. Compatible with: - 84" Hydra/Manticore Lat Pulldown/Low Row Attachment

by Bells of Steel

Two replacement cables for 90" Hydra/Manticore Lat Pulldown Attachment. Compatible with: - 90" Hydra/Manticore Lat Pulldown/Low Row Attachment

by Bells of Steel

Two replacement cables for our current and previous Weight Stack Cable Tower (STK-PULT-MA through STK-PULT3-MA). There are two options: a higher-quality nylon cable or a standard TPU cable.

by Bells of Steel

NOTE: The product has been discontinued. Build your back with the versatile and compact Tall Rack Lat Pulldown / Row Attachment. Add this to your Brute Rack or Utility Rack to do lat pulldowns, cable rows, and other cable exercises using the same machine, seamlessly switching between settings while adding only 12" of depth to your existing setup. With a 285lb weight capacity, you can throw on your existing 1" or 2" weight plates to build strength without sacrificing your space or budget.

by Bells of Steel

Two replacement cables for 72" Hydra/Manticore Lat Pulldown Attachment. Compatible with: - 72" Hydra/Manticore Lat Pulldown/Low Row Attachment

by Bells of Steel

The perfect posterior chain pulverizer, the Glute Ham Slider allows you to tuck your heels or toes into to perform a multitude of hamstring blasting movements or use the handles for ab rolls and other creative upper body exercises. Use the eyelet to connect to a cable machine for even more versatility. The heavy-duty wheels and black powder coat provide durability, rust resistance, and a smooth ride with a space-efficient design that makes storage simple.

by Bells of Steel

A replacement seat pad (smaller pad, for the butt) for the Buzzsaw Bench . Compatible with: - Buzzsaw Bench (BSAW-BEN) - Buzzsaw Bench (BLUT-BSAW2-BEN) - Buzzsaw Bench (SPU-BSAW2-BEN) - Buzzsaw Bench (BSAW2-BEN)

by Bells of Steel

Sick of bracing your feet on a skinny beam mid–lat pulldown? Enter the Footplate for Cable Towers & All In One Trainers: a simple, sturdy add-on that fixes one of the most annoying cable tower quirks. No bolts, no assembly, no fuss. Just pop it out of the box, set it in place, and once your feet are planted, it stays locked down tighter than your lifting belt on PR day. Small upgrade, BIG difference in comfort and stability. This grippy checkerboard steel plate slides right onto your Bells of Steel 2.3” x 2.3” (60mm) setup: Cable Tower , All-in-One Trainer , or Power Rack .

by Bells of Steel

It's time to bump up your lifting game. These crumb bumper plates have a thick stainless steel insert ring with 3 anchor points to prevent common bumper breakdowns. The crumb material is quieter than urethane bumpers. Ideal for lifters who don't have a platform and features coloured flecks for easier weight identification. The number one advantage of bumpers is safety for the lifter. A lifter who hesitates to dump a bad lift because they're afraid of damage to the floor or the equipment is more likely to get hurt. Bumpers take any worry about damage completely out of the equation.

by Bells of Steel

Sculpt your arms into a set of triumphantly terrific triceps! The Tricep Pressdown with Ergo Handgrips is compatible with any cable machine using carabiners. The rubberized grips and large ends are grippy and comfortable to hold, so you work your tris to failure without feeling like you're holding onto a wet spaghetti noodle. IMPORTANT: Requires a carabiner (not included by default) for use on your cable machine.

by Bells of Steel

These commercial-grade dumbbells are hex -ceptionally priced. Our hex dumbbells are made of 50% virgin and 50% recycled rubber — the perfect blend of environmentally-friendly and durable materials to reduce the noise and impact they make against your home gym flooring . Their chrome-plated handles are resistant to corrosion and rust and are ergonomically shaped for a comfortable grip. Plus, they feature fully-welded heads to maximize longevity. Prefer a consistently straight handle to hold? Straight Handle Dumbbells are also available.

by Bells of Steel

Whether you own a lavish home gym or an expansive training facility, fixed barbells are the pinnacle of convenience. These bad boys come in 10 preset weight increments, so you can quickly grab the perfect weight for your workout without doing any plate math to save yourself time and mental energy. They feature two shaft styles: an iconic straight shaft and a joint-friendly curved design. Both styles boast a light knurling that's perfect for those classic barbell exercises.

by Bells of Steel

With the Kettlebell Rack, you can display your kettlebells with the tender love and appreciation they deserve. Each rack boasts a 500lb capacity for a beefy 1,000lb total. You'll be hard-pressed (or snatched, or cleaned, or swung) to overload this baby. While designed to hold competition kettlebells , you can also use it for rubber hex dumbells or powder-coated kettlebells . Just be careful that round gear doesn't merrily roll away! Designed with space in mind, this compact rack will restore order to the lawless wasteland that is your home gym. There's a new sheriff in town. Ye-freaking-haw!

by Bells of Steel

The four-post bench station is what you see at powerlifting meets and serious commercial gyms. It’s a dedicated bench press station, made your way when you add your favourite safeties and j-cups — and the Converter Bench makes it happen. What makes this one different from the competition is the floating bench design. The Converter Bench hangs between the specialty crossmembers with ZERO POSTS UNDERNEATH. That means you can tuck your feet back as far as you want without hitting anything. For powerlifters who rely on leg drive, this is a big deal.

by Bells of Steel

With this Half Rack, your home gym will be so optimized that they'll be calling you The Jacked Effi-cionado. Its 1,000-pound capacity outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks. By matching the same tubing specs as many of our American competitors, you can mix and match attachments freely without needing to stick to one brand - hello, open ecosystem!

by Bells of Steel

Gym so small it could be featured on an episode of Itty-Bitty Home Gyms? Congrats! This is the rack for you. Its 1,000-pound capacity outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist — just bolt it securely before you go trying for that new chin-up PR. The uprights measure true 3″ x 3″ which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands’ imported racks.

by Bells of Steel

Upgrade your non-flat-foot Manticore (or 3"x3" with 1" holes) power racks with our flat foot support system. Grab a pair of flat feet, some reinforcement plates, and an optional cross-member to hold everything together. The flat feet come in 54" and 63" lengths, with an optional 43" flat foot crossmember to connect them for added stability. The 54" length can be paired with the 24" and 30" crossmember depths, while the 63" length can be paired with the 24", 30" and 43" depths.

by Bells of Steel