Bells of Steel USA NÜOBELL-S Adjustable Dumbbells

Overview NÜOBELL Adjustable Dumbbells deliver the speed, feel, and versatility of a full dumbbell rack, without the bulk, clutter, or hassle. Imagine putting a full 5-50 lb or 4-80 lb dumbbell set in a space not much bigger than your favourite lifting shoes—that's these bad boys. With a smooth twist-to-adjust mechanism, a premium steel handle, and a balanced profile that feels like traditional fixed dumbbells, they're built for efficient home training in any space. IMPORTANT: The NÜOBELLs have a 2-year warranty, but it is void if the dumbbells are dropped.

by Bells of Steel

Perfect for the lavish home gym or a high-class commercial facility! The urethane dumbbells are sold in sets of 5-50lbs, 55-80lbs, and 85-100lbs. Available as pairs in 10lb increments from 110-150lbs. Cheap dumbbells can be as far as 10% over or under their listed weight. So, it's a little nuts that your 100lb dumbbell could weigh anywhere from 110lbs to 90lbs. With the B.o.S. Urethane Dumbbells, you have the guarantee of a 2% tolerance from the listed weight, which is exactly what should be expected for commercial-grade quality.

by Bells of Steel

Perfect for the lavish home gym or a high-class commercial facility! The urethane dumbbells are sold in sets of 5-50lbs, 55-80lbs, and 85-100lbs. Available as pairs in 10lb increments from 10-150lbs. Cheap dumbbells can be as far as 10% over or under their listed weight. So, it's a little nuts that your 100lb dumbbell could weigh anywhere from 110lbs to 90lbs. With the B.o.S. Urethane Dumbbells, you have the guarantee of a 2% tolerance from the listed weight, which is exactly what should be expected for commercial-grade quality.

by Bells of Steel

Bells of Steel Loadable Dumbbells feature an aesthetic, rust-resistant finish. The 28mm handle gives you the feel you're used to when using Olympic bars and the brass bushings allow for a smooth rotation. Full dumbbell sets have their place, but they can be tough to fit into a home gym. Even with our Residential Dumbbell Rack or Commercial Dumbbell Rack , you'll be using up the most valuable resource in your gym - floor space. Au contraire, two Loadable Dumbbells can easily be stowed away in the corner without disturbing the natural flow of your gym.

by Bells of Steel

Take your strength training further with the Nuobell 50 to 80-pound Expansion Kit! When 50 pounds no longer challenges you, this kit efficiently upgrades your existing Nuobell set to a powerful 80 pounds per dumbbell. This comprehensive kit includes all the necessary weights and a longer cradle, pre-assembled to smoothly transition your Nuobell set from 50 to 80 pounds—saving you the expense and space of acquiring a whole new set. Download Nuobell 50 to 80 LB Expansion Kit - Standard (Chrome) Product…

by Bells of Steel

Whether you own a lavish home gym or an expansive training facility, fixed barbells are the pinnacle of convenience. These bad boys come in 10 preset weight increments, so you can quickly grab the perfect weight for your workout without doing any plate math to save yourself time and mental energy. They feature two shaft styles: an iconic straight shaft and a joint-friendly curved design. Both styles boast a light knurling that's perfect for those classic barbell exercises.

by Bells of Steel

These commercial-grade quality dumbbells are hex -ceptionally priced. Straight-handle rubber hex dumbbells are made of 30% virgin and 70% recycled rubber — the perfect blend of environmentally friendly and durable materials to reduce the noise and impact they make against your home gym floor. The chrome-plated handles are fully welded to the dumbbell heads, maximizing durability. Plus, they're resistant to corrosion and are fully knurled to maximize your grip.

by Bells of Steel

Sculpt, tone, repeat. Bala Bars are your go-to for building strength without the bulk. Designed as a modern alternative to traditional dumbbells, they’re compact, evenly weighted, and feel good in your hands—so you’ll actually want to use them. Perfect for Pilates, strength training, walking workouts, or adding a little extra burn to your everyday routine. The soft-touch silicone grip keeps things comfortable, while the sleek shape makes every movement feel more natural and controlled.

by Bala

Overview The Adjustable Competition Kettlebell is a precision-engineered strength tool designed for lifters who want the full weight range of an entire kettlebell set in one beautiful bell—without sacrificing space, feel, or durability. Talk about an overachiever. Built with a steel shell, iron plates, 0.5 kg micro-loading, true competition shape and size, and up to 41 weight intervals in one bell, it delivers the exact performance of fixed kettlebells in a modular, space-saving format.

by Bells of Steel

A high-quality, heavy-duty, adjustable weight bench with separate seat and back adjustments, so you can tailor it to your workout. Beefier than the Utility Adjustable Bench but leaner than the Buzz-Saw Bench , it features 7 adjustable positions from 85 to -20 degrees, offering next-level muscle targeting and versatility, while the wheels and a handle make it easy to move and store. We've upgraded the bench pad with a thicker and tougher vinyl than the original version.

by Bells of Steel

Broaden the weight range of your adjustable kettlebell to 9-11.5kg! This plastic bottom shell weighs just 0.7kg (1.5lb), making your empty Adjustable Kettlebell as light as 9kg (19.6lb). That's 3kg less than an empty full-steel version! Access the 9.5-11.5kg (20-25lb) increments using your kettlebell plates. The lighter range is great for single-arm exercises or beginners who don't want to shell out the money for a lighter kettlebell . Weight increments: - 9kg (empty) - 9.5kg - 10kg - 10.5kg - 11kg - 11.5kg IMPORTANT: Warranty is void if dropped.

by Bells of Steel

Overview The Buzz-Saw Bench is a heavy-duty adjustable bench engineered for lifters who prioritize stability, pad performance, and long-term durability over unnecessary gimmicks. Built from thick 11-gauge steel with a reinforced stabilizer foot and a high-density, stay-put pad, it delivers that locked-in confidence you want when the weight gets spicy — without stealing your floor space or your grocery money. Add optional attachments for preacher curls, leg extensions and curls, decline sit-ups, and Bulgarian split squats, and suddenly your "bench" is pulling double (okay, quadruple) duty.

by Bells of Steel

Upgrade your non-flat-foot Manticore (or 3"x3" with 1" holes) power racks with our flat foot support system. Grab a pair of flat feet, some reinforcement plates, and an optional cross-member to hold everything together. The flat feet come in 54" and 63" lengths, with an optional 43" flat foot crossmember to connect them for added stability. The 54" length can be paired with the 24" and 30" crossmember depths, while the 63" length can be paired with the 24", 30" and 43" depths.

by Bells of Steel

It's time to bump up your lifting game! These non-smelly, DB (dead bounce) virgin rubber bumper plates have a thick stainless steel insert ring with 3 anchor points to prevent common bumper breakdowns. The number one advantage of bumpers is safety for the lifter. A lifter who hesitates to dump a barbell because they're afraid of damage to the floor or the equipment is more likely to get hurt. Bumpers take any worry about damage completely out of the equation.

by Bells of Steel

Building your booty has never been this easy! Well, the set-up, that is. The heavy lifting is still up to you. This hip thrust machine will make your reps count. Its angled footplate allows for a deep stretch in the bottom of the exercise, without needing gymnast-level ankle flexibility. And with the pivoting pad, your back is supported from rock bottom to full extension. The 31.75” x 18.75” footplate of this hip thrust machine is spacious enough to accommodate big feet and wider stances.

by Bells of Steel

Whether you own a lavish home gym or an expansive training facility, fixed barbells are the pinnacle of convenience. These bad boys come in 10 preset weight increments, so you can quickly grab the perfect weight for your workout without doing any plate math to save yourself time and mental energy. They feature two shaft styles: an iconic straight shaft and a joint-friendly curved design. Both styles boast a light knurling that's perfect for those classic barbell exercises.

by Bells of Steel

The Kraken Stack Shroud transforms your rack-mounted functional trainer into a sleek & safe centerpiece! This full-metal shroud fits seamlessly over your weight stack without adding unnecessary bulk. It provides a secure barrier between curious fingers and moving parts, making it ideal for home gyms with little ones. This way, you can focus on your workout without scooping up your toddler for the 357th time. Beyond safety, the shroud doubles as a built-in pegboard, turning a previously unused surface into smart storage for your cable attachments !

by Bells of Steel

Sick of bracing your feet on a skinny beam mid–lat pulldown? Enter the Footplate for Cable Towers & All In One Trainers: a simple, sturdy add-on that fixes one of the most annoying cable tower quirks. No bolts, no assembly, no fuss. Just pop it out of the box, set it in place, and once your feet are planted, it stays locked down tighter than your lifting belt on PR day. Small upgrade, BIG difference in comfort and stability. This grippy checkerboard steel plate slides right onto your Bells of Steel 2.3” x 2.3” (60mm) setup: Cable Tower , All-in-One Trainer , or Power Rack .

by Bells of Steel

Your college days might be over, but it's not too late to do another keg stand train like a varsity athlete. Its 1,000-pound capacity outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks. By matching the same tubing specs as many of our American competitors, you can mix and match attachments freely without needing to stick to one brand - hello, open ecosystem!

by Bells of Steel

Weight is weight, right? But what if I told you your sloppy, 45lb plates you got for your 16th birthday from the local big box store were lying to you? The process of casting molten hot iron into molds can be fickle. Machined iron plates are cast in a specialty casting factory with over 40 years of experience, then finished on a lathe that shaves off excessive weight from the back of the plate, followed by polishing and machining edges for an even smoother, more aesthetic plate. The machined plates have a guaranteed tolerance of +/- 1% for 45, 35, and 25 and +/- 3% for 15, 10, 5, and 2.5.

by Bells of Steel

Take your strength training further with the Nuobell 50 to 80-pound Expansion Kit! When 50 pounds no longer challenges you, this kit efficiently upgrades your existing Nuobell set to a powerful 80 pounds per dumbbell. This comprehensive kit includes all the necessary weights and a longer cradle, pre-assembled to smoothly transition your Nuobell set from 50 to 80 pounds—saving you the expense and space of acquiring a whole new set. Download Nuobell 50 to 80 LB Expansion Kit - Standard (Chrome) Product…

by Bells of Steel

We married two Cable Towers together using a Bare Steel Pull-Up Bar to create a joyous union for your home gym. And just like that, a multi-use cable tower/squat stand station was born! Add a set of J-Cups , and you’re ready to squat! Or bench. Or anything else, really. Olympic Weight Plate loadable sleeves keep costs low and possibilities high, while the 210-pound Weight Stack version is the crème de la crème of convenience. Dual Nylon Adjustable Handles on the upright with 30+ height settings create... 30, carry the 1...endless possibilities!

by Bells of Steel

Overview The Bells of Steel Lat Pulldown / Low Row Machine is a heavy duty back-training beast built for lifters who want buttery-smooth cable work without sacrificing half their house of gains. With a smooth 310 lb selectorized stack or plate loaded option, adjustable thigh pads, built-in band pegs, and high/low pulley versatility, this machine delivers wide-grip lat work, heavy low rows, arm training, and cable accessory movements — big back energy without the space demands of a full functional trainer.

by Bells of Steel

With this Half Rack, your home gym will be so optimized that they'll be calling you The Jacked Effi-cionado. Its 1,000-pound capacity outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks. By matching the same tubing specs as many of our American competitors, you can mix and match attachments freely without needing to stick to one brand - hello, open ecosystem!

by Bells of Steel