Bells of Steel USA Crossmember For Converter Bench - 43"
$139.99$125.99Sold by Bells of Steel
This is the specialty crossmember that makes the four-post and two-post Converter Bench stations possible. It’s a 43" crossmember with extra-large brackets and dual hole patterns — Manticore holes on the crossmember (to match the Converter Bench brackets) and oversized bracket holes that fit both Hydra and Manticore uprights. Use one crossmember in your rack for an open, two post style set-up that works with any rack (paired with the Converter Bench’s front foot for stability). Or use two for a floating bench setup (only compatible with 24" depth racks).
More like this
Bells of Steel USA Converter Bench - Flat Bench
The Converter Bench isn’t a one-trick setup. It’s a modular system—build it how you want, change it when you need. Run it as a standalone flat bench. A makeshift incline bench. Set it up as a four-post bench station or two-post bench station . Drop it into your Manticore or Hydra rack (or one of our competitors with matching 3” x 3” upright specs) with the optional 43" specialty crossmember . Or pair it with our upcoming combo rack for a full competition setup. One bench, multiple configurations—no compromises. And here’s where it gets serious: every setup maintains IPF competition height.
Bells of Steel USA Manticore Two Post Converter Bench
Remember the bench station at the gym you grew up going to? Two posts, open front, clean and simple. This is that, but better. The two-post setup uses one pair of 60" uprights at the back and the Converter Bench’s own front foot on the other end. Front foot stabilizers keep everything locked in place with built-in bar storage for more value. Add the j-cups and spotter arms of your choice for safe solo training that the old commercial gym benches never had. It’s less expensive than the four-post setup but gives you the same dedicated bench station experience.
Bells of Steel Manticore Flat Foot Components
Upgrade your non-flat-foot Manticore (or 3"x3" with 1" holes) power racks with our flat foot support system. Grab a pair of flat feet, some reinforcement plates, and an optional cross-member to hold everything together. The flat feet come in 54" and 63" lengths, with an optional 43" flat foot crossmember to connect them for added stability. The 54" length can be paired with the 24" and 30" crossmember depths, while the 63" length can be paired with the 24", 30" and 43" depths.
Bells of Steel Hydra Crossmembers
Looking to upgrade your Hydra Rack? Or build your own franken-rack? Maybe even upgrade your non-Bells of Steel Rack that's also true 3 x 3 inch with 5/8 inch holes? Crossmembers are the horizontal bars that connect the uprights of your power rack. They're easy to install and adjust, and come in different lengths and styles to suit your needs and preferences.They add stability and strength to your rack, while opening it up to more possibilities for your training. Mount band pegs, utility horns, and other rack attachments. Unless otherwise indicated, crossmembers are sold in pairs (2 pieces).
Bells of Steel Hydra Flat Foot Components
Upgrade your non-flat-foot Hydra (or 3"x3" with 5/8" holes) power racks with our flat foot support system. Grab a pair of flat feet, some reinforcement plates, and an optional cross-member to hold everything together. The flat feet come in 56" and 62" lengths, with an optional 43" flat foot crossmember to connect them for added stability. The 56" length can be paired with the 30" or 24" cross member depth, while the 62" length can be paired with the 43", 30" or 24" depth. Popular combos are 43" with a 62" flat foot for maximum roominess.
Bells of Steel USA Half Rack Conversion Kits
Your squat stand was a great first date. This is the glow-up. The Squat Stand to Half Rack Conversion Kit upgrades your setup with rear uprights and crossmembers—giving you more stability, more storage, and way more ways to train, without eating up extra space. Re-racking heavy lifts feels more solid. Attachments hit different. And your rack? Way less “minimalist,” way more “do-it-all.” Load it up with plate storage, add cables, run bands, or train front and back at the same time. The Hydra ecosystem is built to grow with you—so you’re never boxed in.
Bells of Steel USA 3x3 Cable Tower to Rack Connection Kit
The Cable Tower to Rack Connection Kit is your ticket to a smarter, tighter setup. Designed to centre-mount your 3"x3" Oblivyon Cable Tower neatly to your Hydra or Manticore rack with a curved-slot bracket and connector piece that fit both hole patterns. Reclaim that awkward “dead zone” behind your rack while keeping full clearance to squat, bench, and press inside your four-post fortress. The adjustable slot fits 80.5"–90" racks, letting you dial in a perfectly straight fit, so everything looks clean, works smoothly, and stays out of the way when you’re under the bar.
Bells of Steel USA Rack Junctions - 3" x 3"
The Bells of Steel Rack Junctions let you connect, expand, and customize your rack setup any way you want. Attach a Kraken cable tower, extend a pull-up bar, or build a custom storage rig. The only limit is your imagination! There are two versions: Box Junctions: Compact 3x3 uprights with keyholes on all sides. Perfect for top or side connections. Stand Junctions: Taller units with a built-in footplate for added stability and creative setups. Each junction features right-side-up and upside-down keyholes so you can bolt and rotate them in any direction.
Bells of Steel Manticore Vertical Uprights
Looking to upgrade your Manticore Rack? Or build your own franken-rack? Maybe even upgrade your non-Bells of Steel Rack that's also true 3 x 3 inch with 1-inch holes? Uprights are the vertical bars that connect the crossmembers of your power rack. They're easy to install and come in different lengths and styles to suit your needs and preferences. They add functionality to your rack by allowing you to mount rack attachments like a seal row pad, lever arms, and more. Unless otherwise indicated, uprights are sold in pairs (2 pieces) and do not include hardware .
Bells of Steel Manticore Four Post Power Rack - Prebuilt (3" x 3", 1" Holes)
The 4 Post Power Rack is to home gyms, what maple syrup is to Canada: world-renowned, and the sign of impeccable taste. *chef's kiss* It outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist - just bolt it down before you go trying for that new chin-up PR. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks.
Bells of Steel Hydra 2-Sided Rack
The Hydra 2-Sided Rack Builder is excellent for running highly efficient team training without taking up the floor space of a Hydra Rig. Everything that is pictured is included: 84" uprights, 30" crossmembers, 13" plate pegs and more! Additional Hydra attachments are optional. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks. By matching the same tubing specs as many of our American competitors, you can mix and match attachments freely without needing to stick to one brand - hello, open ecosystem!
Bells of Steel Manticore Six Post Power Rack - Prebuilt (3" x 3", 1" Holes)
Like a mullet haircut, the 6 Post Power Rack is all business-in-the-front, party-in-the-back. Its 1,000-pound capacity outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks. By matching the same tubing specs as many of our American competitors, you can mix and match attachments freely without needing to stick to one brand - hello, open ecosystem!
More from Bells of Steel
Add to one order and ship it together.
Bells of Steel Luxury Sit Up Mat
With the Luxury Sit Up Mat, you’ll be looking forward to those hard-core workouts. This mat is designed to maintain your lumbar curvature so the focus stays on your core rather than letting your hip flexors take over. This lightweight, portable mat is textured to prevent slipping, so you get more out of every rep. The extra padding protects your back and tailbone, providing extra comfort on hard gym floors.
Bells of Steel Manticore Flat Foot Components
Upgrade your non-flat-foot Manticore (or 3"x3" with 1" holes) power racks with our flat foot support system. Grab a pair of flat feet, some reinforcement plates, and an optional cross-member to hold everything together. The flat feet come in 54" and 63" lengths, with an optional 43" flat foot crossmember to connect them for added stability. The 54" length can be paired with the 24" and 30" crossmember depths, while the 63" length can be paired with the 24", 30" and 43" depths.
Bells of Steel Premium Rubber Flooring 4' x 6'
Protect your floors and your gear from big lifts with easy-to-clean recycled rubber flooring. Sold in 4' x 6' sheets for maximum floor coverage (which is great, because these heavy-duty 33lb-37.5lb mats are a pain in the glutes to move). Choose between 6mm or 8mm thick to suit your space. IMPORTANT: We are unable to ship these by UPS, so if your total order is less than 500lbs, we will be unable to ship the mats to you. Sold in single sheets.
Bells of Steel Machined Iron Olympic Weight Plate Sets
Weight is weight, right? But what if I told you your sloppy, 45lb plates you got for your 16th birthday from the local big box store were lying to you? The process of casting molten hot iron into molds can be fickle. Machined iron plates are cast in a specialty casting factory with over 40 years of experience, then finished on a lathe that shaves off excessive weight from the back of the plate, followed by polishing and machining edges for an even smoother, more aesthetic plate. The machined plates have a guaranteed tolerance of +/- 1% for 45, 35, and 25 and +/- 3% for 15, 10, 5, and 2.5.
Nuobell NÜOBELL 50 to 80 LB Expansion Kit - Standard (Chrome)
Take your strength training further with the Nuobell 50 to 80-pound Expansion Kit! When 50 pounds no longer challenges you, this kit efficiently upgrades your existing Nuobell set to a powerful 80 pounds per dumbbell. This comprehensive kit includes all the necessary weights and a longer cradle, pre-assembled to smoothly transition your Nuobell set from 50 to 80 pounds—saving you the expense and space of acquiring a whole new set. Download Nuobell 50 to 80 LB Expansion Kit - Standard (Chrome) Product…
Bells of Steel Cable Tower Squat Stands
We married two Cable Towers together using a Bare Steel Pull-Up Bar to create a joyous union for your home gym. And just like that, a multi-use cable tower/squat stand station was born! Add a set of J-Cups , and you’re ready to squat! Or bench. Or anything else, really. Olympic Weight Plate loadable sleeves keep costs low and possibilities high, while the 210-pound Weight Stack version is the crème de la crème of convenience. Dual Nylon Adjustable Handles on the upright with 30+ height settings create... 30, carry the 1...endless possibilities!
Bells of Steel Hydra Squat Stand - Prebuilt (3" x 3", ⅝" Holes)
This squat stand is to home gyms what the Double Double is to Canada — simple, powerful, and a cultural phenomenon. Its 1,000-pound capacity outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist - just bolt it down before you go trying for that new chin-up PR. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks.
Bells of Steel Lat Pulldown Low Row Machine
Overview The Bells of Steel Lat Pulldown / Low Row Machine is a heavy duty back-training beast built for lifters who want buttery-smooth cable work without sacrificing half their house of gains. With a smooth 310 lb selectorized stack or plate loaded option, adjustable thigh pads, built-in band pegs, and high/low pulley versatility, this machine delivers wide-grip lat work, heavy low rows, arm training, and cable accessory movements — big back energy without the space demands of a full functional trainer.
Bells of Steel Foam Roller Storage
Wall-mounted Foam Roller Storage saves floor space, is adaptable to any foam roller length, and fits foam rollers up to 6" in diameter. Designed to work like a can dispenser of ye olden days of the 1980s, this storage system will keep your foam rollers neatly stacked and off of the floor, preventing any mishaps that set you a PR in medical bills. IMPORTANT: Mounting hardware is included. Brackets must be securely mounted to a wall stud or concrete wall for user and equipment safety.
Bells of Steel Hydra Collegiate Power Rack - Prebuilt (3" x 3", ⅝" Holes)
Your college days might be over, but it's not too late to do another keg stand train like a varsity athlete. Its 1,000-pound capacity outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks. By matching the same tubing specs as many of our American competitors, you can mix and match attachments freely without needing to stick to one brand - hello, open ecosystem!
Bells of Steel Weighted Vest
The Weight Vest turns up the burn on your bodyweight exercises, conditioning workouts, and cardio sessions. Adjustable for a snug fit, it hugs your body like your favorite hoodie but adds, well, weights. Using it is simple: slide in your desired training plates — available in 5lb, 7.5lb, 10lb, and 20lb pairs — and strap the vest on. It’s highly adjustable with thick-padded shoulder straps & raised padded areas inside, improving breathability. The weight stays close to your body, so you can focus on form.
Bells of Steel Tricep Pressdown With Ergo Handgrips
Sculpt your arms into a set of triumphantly terrific triceps! The Tricep Pressdown with Ergo Handgrips is compatible with any cable machine using carabiners. The rubberized grips and large ends are grippy and comfortable to hold, so you work your tris to failure without feeling like you're holding onto a wet spaghetti noodle. IMPORTANT: Requires a carabiner (not included by default) for use on your cable machine.