Bells of Steel Manticore Squat Stand - Prebuilt (3" x 3", 1" Holes)

This squat stand is to home gyms what the Double Double is to Canada — simple, powerful, and a cultural phenomenon. Its 1,000-pound capacity outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist - just bolt it down before you go trying for that new chin-up PR. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks.

by Bells of Steel

The Flat Foot Power Rack is where classic design and rock-solid stability team up with a chalky fist bump of swoleship. Its 1,000-pound capacity outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks. By matching the same tubing specs as many of our American competitors, you can mix and match attachments freely without needing to stick to one brand - hello, open ecosystem!

by Bells of Steel

Like a mullet haircut, the 6 Post Power Rack is all business-in-the-front, party-in-the-back. Its 1,000-pound capacity outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks. By matching the same tubing specs as many of our American competitors, you can mix and match attachments freely without needing to stick to one brand - hello, open ecosystem!

by Bells of Steel

The Flat Foot Power Rack is where classic design and rock-solid stability team up with a chalky fist bump of swoleship. Its 1,000-pound capacity outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks. By matching the same tubing specs as many of our American competitors, you can mix and match attachments freely without needing to stick to one brand - hello, open ecosystem!

by Bells of Steel

Like a mullet haircut, the 6 Post Power Rack is all business-in-the-front, party-in-the-back. Its 1,000-pound capacity outlasts heavy pull-ups, handles big bench presses and withstands you squatting a league of ancient Giants (pics or it didn't happen). As a beefed-up version of our classic 4 Post Rack , it'll store your weight plate collection and maximize your space - an organized being is an all-powerful being. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks.

by Bells of Steel

Weighing in at a beefy 73lbs for maximum stability, the Squat Stands 3.0 can be used in home gyms or commercial settings, for instance, weightlifting clubs. Superior 1" spacing through the bench and pull zone and 2" spacing above and below allow you to select the perfect height for your j-cups, for precision lift-offs that can make the difference between a good rep and a superb rep. Trying to decide between squat stands and a power rack? Then check out Squat Stands vs Power Racks: How to Choose .

by Bells of Steel

The Hydra 4-Post Power Rack is a powerhouse for any serious home gym. Built with heavy-duty 3" x 3" (76.2mm x 76.2mm) 11-gauge steel and a 1,000lb weight capacity, it’s designed for squats, bench presses, pull-ups, and more. Laser-cut numbers ensure precise attachment alignment, and the open ecosystem design giving you the freedom to mix and match attachments like our seal row pad, dip attachment and many more . Plus, its modular build allows future expansion or reconfiguration to fit your space and training needs.

by Bells of Steel

Supercharged with a Smith machine, this squat stand delivers rock-solid stability and an open-ecosystem design, giving you the freedom to mix and match attachments like our seal row pad, dip attachment and many more . With the Smith’s 600lb weight capacity, it’s built to handle heavy squats, big bench presses, and even pull-ups. The flat foot support system keeps things extra sturdy, offering a large contact surface area for stability when racking/unracking your bar, doing dips, or hammering out pull-ups without any unexpected acrobatics.

by Bells of Steel

Gym so small it could be featured on an episode of Itty-Bitty Home Gyms? Congrats! This is the folding rack for you. Its 1,000-pound capacity outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist — just bolt it securely before you go trying for that new chin-up PR. The uprights measure true 3″ x 3″ which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands’ imported racks.

by Bells of Steel

Gym so small it could be featured on an episode of Itty-Bitty Home Gyms? Congrats! This is the folding rack for you. Its 1,000-pound capacity outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist — just bolt it securely before you go trying for that new chin-up PR. The uprights measure true 3″ x 3″ which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands’ imported racks.

by Bells of Steel

The latest version of our perfect Power Rack to complement your home gym, at an affordable price that doesn't compromise quality. It's not uncommon for a bar to cost as much as your rack. We put UHMW (AKA dense plastic) on the bottom, back and front of our j-cups to ensure fewer scuffs and damage to your bar, better protecting your hard-earned dollars. Solid steel spotter arms with a secondary steel pipe covering ensures full protection for when you miss that heavy squat. The safety arms ends also act as a second pair of j-cups, making your new rack even more useful.

by Bells of Steel

If the Manticore Rack and Oblivyon Tower had a very beefy baby, this would be it. The 3"x3" Cable Tower Squat Stands are a fusion of a cable crossover machine and squat rack, jammed into one overbuilt unit that still fits in your garage and allows for 100's of exercises. These dual adjustable cable towers are built with thick 3x3” chrome uprights that boast 4-way keyhole attachments and laser-cut numbering, so you can set your heights without guessing games. Connected by a rugged Manticore pull-up bar for added strength, stability and pull-up gains.

by Bells of Steel

It's time to bump up your lifting game. These crumb bumper plates have a thick stainless steel insert ring with 3 anchor points to prevent common bumper breakdowns. The crumb material is quieter than urethane bumpers. Ideal for lifters who don't have a platform and features coloured flecks for easier weight identification. The number one advantage of bumpers is safety for the lifter. A lifter who hesitates to dump a bad lift because they're afraid of damage to the floor or the equipment is more likely to get hurt. Bumpers take any worry about damage completely out of the equation.

by Bells of Steel

The Utility Hook is the smallest—but mightiest—gym storage solution. This solid steel s-hook easily slides into tubing holes up to 11 gauge (2.9mm thick). Organize your cable attachments along the center upright of your All-in-One Trainer . Hang lifting chains off the sides of the rear upright on your Cable Tower . Store your barbell across two hooks on a 76" wide Hydra Universal Storage System. And this is just the beginning. Beyond your gym's space restrictions, the only limit is your creativity. Don't be surprised if you get hooked .

by Bells of Steel

So you think you shouldn’t lift heavier than you can hold? Pfffft . Get a GRIP. Sure, we’re all for improving your grip s trength and * ahem * getting your hands dirty, but let’s be real: your grip shouldn’t limit you from growing the LARGEST muscles in your body. The Figure 8 design provides an ultra-fast and easy setup, with durable quality made to last. Studies showed that using straps leads to greater perceived grip security and power — and there’s nothing we weightlifters more than a placebo effect. I’ll take my questionable supps shaken, not stirred, thanks.

by Bells of Steel

Your college days might be over, but it's not too late to do another keg stand train like a varsity athlete. Its 1,000-pound capacity outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks. By matching the same tubing specs as many of our American competitors, you can mix and match attachments freely without needing to stick to one brand - hello, open ecosystem!

by Bells of Steel

Made of recycled rubber powder, this ultra-smooth rubber roll is perfect for covering your whole home gym or commercial gym. With a home gym you get the joy of adding flooring around awkwardly shaped objects like furnaces, vents, and load-bearing walls. No reason to panic, though! A sharp utility knife and some careful trimming will save the day. Its easy-to-clean rubber surface simply needs a quick once-over with a mop, and you're good to go. And while mopping is a great warm-up, maybe wait until after you squat so you don't turn your PR into an ER.

by Bells of Steel

Wall-mounted Foam Roller Storage saves floor space, is adaptable to any foam roller length, and fits foam rollers up to 6" in diameter. Designed to work like a can dispenser of ye olden days of the 1980s, this storage system will keep your foam rollers neatly stacked and off of the floor, preventing any mishaps that set you a PR in medical bills. IMPORTANT: Mounting hardware is included. Brackets must be securely mounted to a wall stud or concrete wall for user and equipment safety.

by Bells of Steel

Looking to upgrade your Manticore Rack? Or build your own franken-rack? Maybe even upgrade your non-Bells of Steel Rack that's also true 3 x 3 inch with 1-inch holes?Uprights are the vertical bars that connect the crossmembers of your power rack. They're easy to install and come in different lengths and styles to suit your needs and preferencesThey add functionality to your rack by allowing you to mount rack attachments like a seal row pad, lever arms, and more.Unless otherwise indicated, uprights are sold in pairs (2 pieces) and do not include hardware.

by Bells of Steel

With the Luxury Sit Up Mat, you’ll be looking forward to those hard-core workouts. This mat is designed to maintain your lumbar curvature so the focus stays on your core rather than letting your hip flexors take over. This lightweight, portable mat is textured to prevent slipping, so you get more out of every rep. The extra padding protects your back and tailbone, providing extra comfort on hard gym floors.

by Bells of Steel

Sick of bracing your feet on a skinny beam mid–lat pulldown? Enter the Footplate for Cable Towers & All In One Trainers: a simple, sturdy add-on that fixes one of the most annoying cable tower quirks. No bolts, no assembly, no fuss. Just pop it out of the box, set it in place, and once your feet are planted, it stays locked down tighter than your lifting belt on PR day. Small upgrade, BIG difference in comfort and stability. This grippy checkerboard steel plate slides right onto your Bells of Steel 2.3” x 2.3” (60mm) setup: Cable Tower , All-in-One Trainer , or Power Rack .

by Bells of Steel

If Mighty Grip Plates & Dead Bounce Conflict Bumper Plates had a baby, this would be it. The Rubber Coated Iron Weight Plates feature a durable 100% virgin rubber coating that is nearly odorless, so you’ll avoid the foul smell of low-quality rubber while protecting your equipment from damage. Plus, they’ll minimize noise — in case the clangin’ & bangin’ of iron plates remind you of nails on a chalkboard (we like your shopping habits, so we’ll let this one slide). The large ergonomic handles and rubber coating improve comfort on farmer walks, back extensions, and weighted crunches.

by Bells of Steel

Experience pain-free mobility and floor exercises on hard basement or garage gym floors. 2.5" of plush, cushy foam with a non-slip surface make your uncomfortable workouts as comfortable as possible (Burpees not included-those just suck). When you're done, use the convenient transport handles to fold it and tuck it away. Or keep it under your desk at work for naps. Not that we do that here, Kaevon...

by Bells of Steel

Broaden the weight range of your adjustable kettlebell to 9-11.5kg! This plastic bottom shell weighs just 0.7kg (1.5lb), making your empty Adjustable Kettlebell as light as 9kg (19.6lb). That's 3kg less than an empty full-steel version! Access the 9.5-11.5kg (20-25lb) increments using your kettlebell plates. The lighter range is great for single-arm exercises or beginners who don't want to shell out the money for a lighter kettlebell . Weight increments: - 9kg (empty) - 9.5kg - 10kg - 10.5kg - 11kg - 11.5kg IMPORTANT: Warranty is void if dropped.

by Bells of Steel