Bells of Steel Residential Air Bike with Wind Guard

Overview Your pain cave deserves better. The Blitz Air Bike is built to commercial spec — 25" (63.5 cm) fan, belt drive, 350 lb (159 kg) capacity — in a machine priced for your garage, not a commercial facility. Resistance scales with effort. Go easy, get easy. Sprint at full capacity and it'll feel every bit of it. Belt drive means no chain rattle, NO lubrication, and 5 AM sessions that don't wake up the rest of the house. Which, honestly, might be the feature that wins it for most gym enthusiasts. No programs. No subscription. No ceiling. Trusted by 250+ gym enthusiasts. Rated 4.8/5.

by Bells of Steel

The Dreadmill is a lean, hyper-versatile, dread dream machine! This 3-in-1 cardio machine is a farmer walk, sled push, and manual incline treadmill — all rolled into one. Applying resistance is easy and smooth, thanks to the magnetic resistance lever. By positioning magnets near the flywheel, resistance is generated without any physical contact, ensuring nearly whisper-quiet operation. Keep it low and light, or crank up the intensity for serious athletic gainzzz.

by Bells of Steel

Did your parents ever tell you that you're going nowhere fast? Well, now you can go nowhere FASTER with the Blitz Indoor Cycling Bike . Take that, Dad! This highly adjustable, magnetic bike is great for low-impact recovery rides & calorie-roasting HIIT workouts. The magnetic resistance offers a smooth ride that's less soul-sucking than the Blitz Air Bike , while the adjustable handlebars and seat help you find that Golidlocks-worthy "just right" setup.

by Bells of Steel

This smooth, self-powered treadmill offers a modern aesthetic — without the maintenance needs of a motorized treadmill. Torch your calories and posterior chain with an 8.4° curve angle, so you don't have to resort to soul-crushing HIIT workouts on a Blitz Air Bike . This manual treadmill is self-powered, meaning no electricity and no worrying about plug placement-just tip it onto the wheels and move it around to wherever you want. The compact design offers a streamlined 47" x 17.3" running deck and 4-inch wide foot rails.

by Bells of Steel

Elevate your cardio workouts with the Blitz Magnetic Resistance Manual Treadmill! 6 magnetic resistance levels, so you can walk, jog, sprint, or sled push. Magnetic resistance offers an ultra-smooth and highly responsive experience with minimal maintenance. The steep 17° curve will light your posterior chain on fire. When you're ready to really feel the burn, crank up the resistance and brace against the padded front handles for a sled push - turning your monotonous cardio workouts into exciting calorie bonfires.

by Bells of Steel

The Blitz Mountain Climber Incline Treadmill is your ticket to hitting the trail in peak physical form. This cardio machine ranges from a -5% decline to a seriously humbling 50% incline. Its expansive handles help you hold on for dear life stay safe and secure, and simulate the assistance of trekking poles. Walk as slow as 0.5km/hr or at a neck-breaking “BEAAAAAAR!” pace of 8km/hr. Its 24-inch touchscreen and metrics will give you sky-high confidence. The pulse grips monitor your heart rate in real time, and all other basic metrics are covered.

by Bells of Steel

by REP Fitness · Denver, CO

🚚 Free shipping on all orders · Ships from Colorado

Out-train back pain and upper body mobility limitations while building lower body strength. The Belt Squat Machine is space-efficient and versatile, unlocking endless exercises for your home gym at an unbeatable price. Built like a tank, this beast boasts an impressive 700lb capacity (step aside, Hip Thrust Machine ). Plus, its innovative design features commercial-grade Zerk bearings and band pegs for improving your lockout strength. Despite its beastly strength, this strength machine is a gentle giant in your gym space.

by Bells of Steel

The Saris M2 smart bike trainer is capable of replicating any workout thrown its way, up to 1500 watts and a 15% climbing grade. Simply connect to your indoor…

by Outdoor Gear Exchange · Burlington, VT

🚚 Free shipping on orders over $99 · Ships from Vermont

Overview The All-In-One Trainer is a full-strength training system designed for home lifters who want rack functionality, cable versatility, and commercial-grade performance—all in a compact, corner-friendly footprint. This machine replaces a functional trainer, squat rack, and multiple individual accessories, helping you build a complete strength setup in one piece of equipment without turning your space into an obstacle course. IMPORTANT: The plate loaded All-In-One Trainer MUST be bolted down to ensure the user and equipment's safety.

by Bells of Steel

Step into your domain of domination with The Kolossos — a hybrid powerhouse designed to bring legendary strength training to your home gym . This all-in-one marvel combines a fixed-bar Smith Machine with two Weight Stack Krakens , giving you the tools to crush squats, presses, cable exercises, and more with ease. The Smith bar features smooth linear bearings and a 600lb capacity to keep your lifts stable and secure — no spotter needed.

by Bells of Steel

Unlock a functional trainer or transform your Cable Towers into a standalone functional trainer with a Converter Kit! Choose your own adventure with plate-loaded and weight-stack options: Olympic Weight Plate loadable sleeves keep costs low and possibilities high, while the 210-pound Weight Stack version is the crème de la crème of convenience. Enjoy cable workouts on the dual Cable Towers with the adjustable handles and 33 height settings on each upright for dozens of cable exercises. The tower uprights are compatible with 2.3” rack attachments for even more exercise versatility.

by Bells of Steel

If Mighty Grip Plates & Dead Bounce Conflict Bumper Plates had a baby, this would be it. The Rubber Coated Iron Weight Plates feature a durable 100% virgin rubber coating that is nearly odorless, so you’ll avoid the foul smell of low-quality rubber while protecting your equipment from damage. Plus, they’ll minimize noise — in case the clangin’ & bangin’ of iron plates remind you of nails on a chalkboard (we like your shopping habits, so we’ll let this one slide). The large ergonomic handles and rubber coating improve comfort on farmer walks, back extensions, and weighted crunches.

by Bells of Steel

Bid a not-so-fond farewell to impossibly tangled bands, sweat-soaked support wear, and chaotically misplaced Barbell Collars . You'll never look like one of those poor, helpless saps who can't do anything right in an infomercial again. Mount it directly to your wooden wall studs, your concrete wall, or your power rack (Hydra, Manticore or 2.3”) to keep your accessories secure, out of the way, and readily accessible for your next lifting masterpiece!

by Bells of Steel

Ankle straps are widely popular in the glute-training community for kickbacks, donkey kicks and lateral leg raises. But that's not all they're good for! With 2 d-ring attachment points, the ankle straps are great for laying knee tucks and leg lifts if you don't have access to a pull-up bar or find your grip is the limiting factor and don't care for Hanging Ab Straps (we won't take it personally). Wear them on your wrists to perform shoulder-pumping lateral raises & chest flies on a Cable Tower or a better mind-muscle connection or to work around a hand injury. Sold as a pair.

by Bells of Steel

With the Kettlebell Rack, you can display your kettlebells with the tender love and appreciation they deserve. Each rack boasts a 500lb capacity for a beefy 1,000lb total. You'll be hard-pressed (or snatched, or cleaned, or swung) to overload this baby. While designed to hold competition kettlebells , you can also use it for rubber hex dumbells or powder-coated kettlebells . Just be careful that round gear doesn't merrily roll away! Designed with space in mind, this compact rack will restore order to the lawless wasteland that is your home gym. There's a new sheriff in town. Ye-freaking-haw!

by Bells of Steel

This squat stand is to home gyms what the Double Double is to Canada — simple, powerful, and a cultural phenomenon. Its 1,000-pound capacity outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist - just bolt it down before you go trying for that new chin-up PR. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks.

by Bells of Steel

A barbell and a rack? Everyone has that. A Viking press landmine attachment in the corner? That's a different gym... and a different kind of shoulder day. Dust off the beater bar. Drop it into a landmine , load plates, slide the attachment over the sleeve, lock the knob. You're doing the viking press exercise in under a minute, no Strongman meet required. FOUR GRIP POSITIONS. 2 neutral, 2 regular. Narrow or wide, palms in or palms forward: press the way your shoulders actually want to move.

by Bells of Steel

Building your booty has never been this easy! Well, the set-up, that is. The heavy lifting is still up to you. This hip thrust machine will make your reps count. Its angled footplate allows for a deep stretch in the bottom of the exercise, without needing gymnast-level ankle flexibility. And with the pivoting pad, your back is supported from rock bottom to full extension. The 31.75” x 18.75” footplate of this hip thrust machine is spacious enough to accommodate big feet and wider stances.

by Bells of Steel

With the Luxury Sit Up Mat, you’ll be looking forward to those hard-core workouts. This mat is designed to maintain your lumbar curvature so the focus stays on your core rather than letting your hip flexors take over. This lightweight, portable mat is textured to prevent slipping, so you get more out of every rep. The extra padding protects your back and tailbone, providing extra comfort on hard gym floors.

by Bells of Steel

The four-post bench station is what you see at powerlifting meets and serious commercial gyms. It’s a dedicated bench press station, made your way when you add your favourite safeties and j-cups — and the Converter Bench makes it happen. What makes this one different from the competition is the floating bench design. The Converter Bench hangs between the specialty crossmembers with ZERO POSTS UNDERNEATH. That means you can tuck your feet back as far as you want without hitting anything. For powerlifters who rely on leg drive, this is a big deal.

by Bells of Steel

The Utility Horn easily mounts on your rack for quick access to your Olympic weight plates , bands, or chains — whatever you need handy up to 100lbs (or 132lbs for Manticore). It keeps your stuff off the floor to give you more room to smash your goals. The cotter pin offers extra security and stability while making it easy to move around until you find the perfect spot. Plus, the black powder coating provides rust resistance.

by Bells of Steel

The perfect posterior chain pulverizer, the Glute Ham Slider allows you to tuck your heels or toes into to perform a multitude of hamstring blasting movements or use the handles for ab rolls and other creative upper body exercises. Use the eyelet to connect to a cable machine for even more versatility. The heavy-duty wheels and black powder coat provide durability, rust resistance, and a smooth ride with a space-efficient design that makes storage simple.

by Bells of Steel

Take your strength training further with the Nuobell 50 to 80-pound Expansion Kit! When 50 pounds no longer challenges you, this kit efficiently upgrades your existing Nuobell set to a powerful 80 pounds per dumbbell. This comprehensive kit includes all the necessary weights and a longer cradle, pre-assembled to smoothly transition your Nuobell set from 50 to 80 pounds—saving you the expense and space of acquiring a whole new set. Download Nuobell 50 to 80 LB Expansion Kit - Standard (Chrome) Product…

by Bells of Steel