Bells of Steel Adjustable Wall Or Ceiling Mounted Pull Up Bar

The world is your oyster with this handy-dandy rack attachment. Use it as a second pull-up bar on your power rack or add it to a pair of lever arms to unlock barbell and machine-inspired exercises at home — hip thrusts, thrusters, rows, deadlifts, you name it! The beefy 6-gauge steel promises solid construction while the different finishes offer plenty of variety. With a max capacity of 500lbs, these adjustable pull-up bars are meant to withstand heavy weights. Choose the option that suits your power rack or cable tower.

by Bells of Steel

Raise the bar on your strength training with this upgraded pull-up bar. Choose from the built-in standard bar, fat grip bar, or neutral grip to keep things spicy. Target your back, biceps, and core, or just hang around to boost your grip strength and decompress your spine after heavy squats. Or throw on a Cable Pulley to simulate cable machine exercises at home. The Multi-Grip Pull Up Bar has an ergonomic design and rust-resistant black powder coat. With a 500lb weight capacity and sturdy steel construction, this bad boy was built to last.

by Bells of Steel

Raise the bar on your strength training with the last pull-up bar you'll ever need. Choose from a standard grip, neutral grip, or globe grip to keep things spicy. Target your back, biceps, forearms, and core, or just hang around to boost your grip strength and decompress your spine after heavy squats. The Globe Grip Pull Up Bar has an innovative design and rust-resistant black powder coat. With a 500lb weight capacity and sturdy steel construction, this bad boy was built to last. Choose the size that corresponds with your power rack.

by Bells of Steel

Wall-mount pull-up bar with multiple grip options to vary your routine and challenge different muscle groups If installed properly, the weight capacity for this pull-up bar is 700lbs.

by REP Fitness · Denver, CO

🚚 Free shipping on all orders · Ships from Colorado

by REP Fitness · Denver, CO

🚚 Free shipping on all orders · Ships from Colorado

This nifty wall mounted barbell holder lets you store your bars horizontally on your wall. It gives your bars the center-piece flair they deserve while giving you more room for activities — ahem, exercise. HDPE plastic lining protects the knurling on your barbell for a lifetime of lifting pleasure. Not so handy? No worries! All you need to install is a level and some basic tools. We highly recommend mounting it on your wall studs or using a stringer, but wall anchors are included as well as a third option.

by Bells of Steel

Elevate your muscle gains from pushdowns, rows, raises & more with the Multi-Purpose V Style Bar! Compatible with any cable machine using carabiners, the Multi-Purpose V Style Bar is the jack-of-all-trades for cable training. Its v-style design allows for pushdowns, rows, pulldowns, raises and more without needing 93 different cable attachments. Plus, the comfortable rubberized grips are gentle on your hands in case mountainous callouses aren't your thing. IMPORTANT: Requires a carabiner (not included by default) for use on your cable machine.

by Bells of Steel

These multipurpose, space-efficient blocks take up less than 2' x 2' in your Lifting Paradise. The tongue and groove design stacks securely, so you can confidently block pulls, do jerk work, step-ups, tricep dips, or stand on them for deficit deadlifts. Sold in pairs so you can stack 'em and get to work on your next PR.

by Bells of Steel

Ready to set a PR in home gym organization? Save space and get even more use out of your power rack by attaching a Vertical Mount Barbell Holder on the front or back of your uprights. Two bolts offer easy mounting, while an inner liner protects your barbell. The black powder coat offers rust resistance, and the 220lb max capacity can handle your barbell, even if you use it as a makeshift coat rack (please don't). Choose the Vertical Mount Barbell Holder that corresponds with your power rack measurements. Hardware included.

by Bells of Steel

Hydra Lever Arms simulate DOZENS of machine exercises in only a fraction of the space & without a jaw-dropping price tag. Add an Adjustable Pull-Up Bar for even more versatility (hip thrusts and leg presses, anyone?) Height and handle adjustments are simple, so you can find your perfect placement. These space-efficient attachments (sold in pairs) add only 4.5" to the front of your rack when not in use and tuck nicely inside racks with a minimum 43" depth. With a 500lb weight capacity and two handle styles to choose from, you're set for life.

by Bells of Steel

The heavy-duty Y Dip Attachment easily mounts to your rack for dips, knee or leg lifts, and more. Perfect for blasting your chest, delts, triceps, and core! You can even get creative and use this for neutral grip pull ups and inverted rows when you're short on space or time. This rack attachment boasts a black powder coat to prevent rust and UHMW lining to protect your uprights and ensure a snug fit. The UHMW-lined Manticore version can be hung vertically on your upright for storage. Easily install and adjust the height with a simple drop pin.

by Bells of Steel

Store a barbell above your power rack, converting it into a useable pull-up station - for smarter storage AND a bigger back. The 3D-printed Hydra Barbell Holder Rack Attachment is made to fit perfectly on true 3" x 3" tubing with 5/8" holes but will fit smaller racks with a DIY shim. With a 500lb capacity, this versatile storage solution will hold barbells up to 32mm in diameter. Place your barbell across the power rack for a makeshift pull-up station, ideal for lifters with a Lat Pulldown attachment.

by Bells of Steel

Your college days might be over, but it's not too late to do another keg stand train like a varsity athlete. Its 1,000-pound capacity outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks. By matching the same tubing specs as many of our American competitors, you can mix and match attachments freely without needing to stick to one brand - hello, open ecosystem!

by Bells of Steel

Remember the bench station at the gym you grew up going to? Two posts, open front, clean and simple. This is that, but better. The two-post setup uses one pair of 60" uprights at the back and the Converter Bench’s own front foot on the other end. Front foot stabilizers keep everything locked in place with built-in bar storage for more value. Add the j-cups and spotter arms of your choice for safe solo training that the old commercial gym benches never had. It’s less expensive than the four-post setup but gives you the same dedicated bench station experience.

by Bells of Steel

If you want bragging rights for having the nicest plates on the block, then these Urethane Change Plates are a must-have. Due to their urethane construction, colors have more "pop" to them. This makes lettering and numbers appear crisper, adding a noticeable level of professionalism that'll make others go "DAAAAAMNN!" Urethane is also a much harder material than rubber, so these urethane change plates are a huge step above the durability of rubber bumpers — even our competition bumper plates can't match their toughness.

by Bells of Steel

Weighing in at a beefy 73lbs for maximum stability, the Squat Stands 3.0 can be used in home gyms or commercial settings, for instance, weightlifting clubs. Superior 1" spacing through the bench and pull zone and 2" spacing above and below allow you to select the perfect height for your j-cups, for precision lift-offs that can make the difference between a good rep and a superb rep. Trying to decide between squat stands and a power rack? Then check out Squat Stands vs Power Racks: How to Choose .

by Bells of Steel

Out-train back pain and upper body mobility limitations while building lower body strength. The Belt Squat Machine is space-efficient and versatile, unlocking endless exercises for your home gym at an unbeatable price. Built like a tank, this beast boasts an impressive 700lb capacity (step aside, Hip Thrust Machine ). Plus, its innovative design features commercial-grade Zerk bearings and band pegs for improving your lockout strength. Despite its beastly strength, this strength machine is a gentle giant in your gym space.

by Bells of Steel

Building your booty has never been this easy! Well, the set-up, that is. The heavy lifting is still up to you. This hip thrust machine will make your reps count. Its angled footplate allows for a deep stretch in the bottom of the exercise, without needing gymnast-level ankle flexibility. And with the pivoting pad, your back is supported from rock bottom to full extension. The 31.75” x 18.75” footplate of this hip thrust machine is spacious enough to accommodate big feet and wider stances.

by Bells of Steel

Replacement monitor for the Blitz Bike & Residential Blitz Bike .

by Bells of Steel

We married two Cable Towers together using a Bare Steel Pull-Up Bar to create a joyous union for your home gym. And just like that, a multi-use cable tower/squat stand station was born! Add a set of J-Cups , and you’re ready to squat! Or bench. Or anything else, really. Olympic Weight Plate loadable sleeves keep costs low and possibilities high, while the 210-pound Weight Stack version is the crème de la crème of convenience. Dual Nylon Adjustable Handles on the upright with 30+ height settings create... 30, carry the 1...endless possibilities!

by Bells of Steel

Ankle straps are widely popular in the glute-training community for kickbacks, donkey kicks and lateral leg raises. But that's not all they're good for! With 2 d-ring attachment points, the ankle straps are great for laying knee tucks and leg lifts if you don't have access to a pull-up bar or find your grip is the limiting factor and don't care for Hanging Ab Straps (we won't take it personally). Wear them on your wrists to perform shoulder-pumping lateral raises & chest flies on a Cable Tower or a better mind-muscle connection or to work around a hand injury. Sold as a pair.

by Bells of Steel

Your college days might be over, but it's not too late to do another keg stand train like a varsity athlete. Its 1,000-pound capacity outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks. By matching the same tubing specs as many of our American competitors, you can mix and match attachments freely without needing to stick to one brand - hello, open ecosystem!

by Bells of Steel

Overview The Bells of Steel Lat Pulldown / Low Row Machine is a heavy duty back-training beast built for lifters who want buttery-smooth cable work without sacrificing half their house of gains. With a smooth 310 lb selectorized stack or plate loaded option, adjustable thigh pads, built-in band pegs, and high/low pulley versatility, this machine delivers wide-grip lat work, heavy low rows, arm training, and cable accessory movements — big back energy without the space demands of a full functional trainer.

by Bells of Steel

The Flat Foot Power Rack is where classic design and rock-solid stability team up with a chalky fist bump of swoleship. Its 1,000-pound capacity outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks. By matching the same tubing specs as many of our American competitors, you can mix and match attachments freely without needing to stick to one brand - hello, open ecosystem!

by Bells of Steel