Bells of Steel Double D Handle Cable Attachment

Isolate your arms, chest & more! The Single D Rubber Handle is compatible with any cable machine using carabiners and is excellent for curls, shoulder raises and chest flies. The handles rotate smoothly and the rubberized grips are comfortable to hold, so you can train to failure without feeling like you're holding onto a wet spaghetti noodle. IMPORTANT: Requires a carabiner (not included by default) for use on your cable machine.

by Bells of Steel

Compatible with any cable machine using carabiners, the Multi-Purpose Close Grip Cable Attachment is the jack-of-all-trades for cable training. Its close-grip design allows for pulldowns, rows, pushdowns and more without needing 93 different cable attachments. Plus, the comfortable rubberized grips are gentle on your hands in case mountainous callouses aren't your thing. IMPORTANT: Requires a carabiner (not included by default) for use on your cable machine.

by Bells of Steel

Bolster your back muscles from multiple angles with the Parallel Lat Bar! Compatible with any cable machine using carabiners, it features a rotating connection point to ensures buttery-smooth reps. The comfortable rubberized grips are gentler on your hands in case mountainous callouses aren't your thing, with neutral grips for more variety in your back-widening quest. IMPORTANT: Requires a carabiner (not included by default) for use on your cable machine.

by Bells of Steel

Meet the multi-tool of cable attachments! We get it. Even the most ergonomic cable attachments can feel off for certain people - this is where the D-Handle Bar shines brightest. It lets you micro-adjust the width, angles, and range of motion of your adjustable nylon handles, rubber d-handles, and single tricep ropes. And thanks to the open center hole, you can also use it with a barbell in a landmine attachment! Compatible with any cable machine using carabiners, though a 2nd carabiner might be needed to avoid excess twisting. Includes two carabiners.

by Bells of Steel

If you want to improve the definition and strength of your back muscles, you need a lat pulldown bar. Compatible with any cable machine using carabiners, both lat pulldown bars feature a rotating connection point ensuring buttery-smooth reps. The A3 steel and durable chrome coating resist rust, while the aggressive knurling results in an unmatched grip. The lat bar with rubberized grips is gentler on your hands in case mountainous callouses aren't your thing, and is safer with its rounded rubber ends. The "Standard" lat bar is included by default with the Lat Pulldown Machine .

by Bells of Steel

Compatible with any cable machine using carabiners, this 20" straight bar cable attachment is the jack-of-all-trades for cable training. Its straight design allows for pushdowns, rows, pulldowns, raises and more without needing 93 different cable attachments. The comfortable rubberized grips are gentle on your hands, in case mountainous calluses aren't your thing. The rotating center allows for smooth, natural movement without you needing to loosen your grip. This way, you’ll never have to worry about inertia straining your wrists or elbows and causing injury.

by Bells of Steel

Elevate your muscle gains from pushdowns, rows, raises & more with the Multi-Purpose V Style Bar! Compatible with any cable machine using carabiners, the Multi-Purpose V Style Bar is the jack-of-all-trades for cable training. Its v-style design allows for pushdowns, rows, pulldowns, raises and more without needing 93 different cable attachments. Plus, the comfortable rubberized grips are gentle on your hands in case mountainous callouses aren't your thing. IMPORTANT: Requires a carabiner (not included by default) for use on your cable machine.

by Bells of Steel

Isolate your arms, chest & more! The Adjustable Aluminum Handles are compatible with any cable machine using carabiners and are excellent for curls, shoulder raises, chest flies, and much more. The 5.25" wide handles rotate smoothly and the aluminum coating will help keep those pesky rust fairies away. Adjust them to the perfect length using the five heavy-duty d-rings. IMPORTANT: Requires carabiners (not included by default) for use on your cable machine.

by Bells of Steel

Improve the definition and strength of your back muscles AND your forearms with this fat bar lat pulldown bar! Whether you’re into grappling sports, arm wrestling, or just want to build your grip strength, fat bar attachments are a game-changer. Their unique design builds your grip in ways that typical cable attachments can’t match. Compatible with any cable machine using a carabiner, and features a rotating connection point to ensure buttery-smooth reps. IMPORTANT: Requires a carabiner (not included) for use on your cable machine.

by Bells of Steel

Isolate your arms, chest & more! The Fat Bar Single D Handle is excellent for curls, shoulder raises and chest flies, while building gorilla-like grip. Whether you’re into grappling sports, arm wrestling, or just want to build your grip strength, fat bar attachments are a game-changer. Their unique design builds your grip in ways that typical cable attachments can’t match. Compatible with any cable machine using a carabiner, the fat handle rotates freely to ensure buttery-smooth reps. IMPORTANT: Requires a carabiner (not included by default) for use on your cable machine.

by Bells of Steel

The Fat Bar Straight Handle Bar is the jack of all trades for cable training. Its straight design allows for pushdowns, rows, pulldowns, raises, and more without needing 93 different cable attachments. Whether you’re into grappling sports, arm wrestling, or just want to build your grip strength, fat bar attachments are a game-changer. Their unique design builds your grip in ways that typical cable attachments can’t match. Compatible with any cable machine using a carabiner. IMPORTANT: Requires a carabiner (not included by default) for use on your cable machine.

by Bells of Steel

Your isolation muscles CRAVE variety, just like a gym bro thirsts for their caffeine-ridden pre-workout drink - so, give 'em what they want! With the Double Hook EZ Curl Bar Cable Attachment , you can unlock joint-friendly barbell exercises like curls, pushdowns, skull crushers, upright rows, and more! IMPORTANT: Requires two carabiners (not included by default) for use on your cable machine. Not guaranteed to fit non-B.o.S. machines.

by Bells of Steel

Bid a not-so-fond farewell to impossibly tangled bands, sweat-soaked support wear, and chaotically misplaced Barbell Collars . You'll never look like one of those poor, helpless saps who can't do anything right in an infomercial again. Mount it directly to your wooden wall studs, your concrete wall, or your power rack (Hydra, Manticore or 2.3”) to keep your accessories secure, out of the way, and readily accessible for your next lifting masterpiece!

by Bells of Steel

Remember the bench station at the gym you grew up going to? Two posts, open front, clean and simple. This is that, but better. The two-post setup uses one pair of 60" uprights at the back and the Converter Bench’s own front foot on the other end. Front foot stabilizers keep everything locked in place with built-in bar storage for more value. Add the j-cups and spotter arms of your choice for safe solo training that the old commercial gym benches never had. It’s less expensive than the four-post setup but gives you the same dedicated bench station experience.

by Bells of Steel

Looking to upgrade your Manticore Rack? Or build your own franken-rack? Maybe even upgrade your non-Bells of Steel Rack that's also true 3 x 3 inch with 1-inch holes?Uprights are the vertical bars that connect the crossmembers of your power rack. They're easy to install and come in different lengths and styles to suit your needs and preferencesThey add functionality to your rack by allowing you to mount rack attachments like a seal row pad, lever arms, and more.Unless otherwise indicated, uprights are sold in pairs (2 pieces) and do not include hardware.

by Bells of Steel

With the Luxury Sit Up Mat, you’ll be looking forward to those hard-core workouts. This mat is designed to maintain your lumbar curvature so the focus stays on your core rather than letting your hip flexors take over. This lightweight, portable mat is textured to prevent slipping, so you get more out of every rep. The extra padding protects your back and tailbone, providing extra comfort on hard gym floors.

by Bells of Steel

This squat stand is to home gyms what the Double Double is to Canada — simple, powerful, and a cultural phenomenon. Its 1,000-pound capacity outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist - just bolt it down before you go trying for that new chin-up PR. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks.

by Bells of Steel

Ankle straps are widely popular in the glute-training community for kickbacks, donkey kicks and lateral leg raises. But that's not all they're good for! With 2 d-ring attachment points, the ankle straps are great for laying knee tucks and leg lifts if you don't have access to a pull-up bar or find your grip is the limiting factor and don't care for Hanging Ab Straps (we won't take it personally). Wear them on your wrists to perform shoulder-pumping lateral raises & chest flies on a Cable Tower or a better mind-muscle connection or to work around a hand injury. Sold as a pair.

by Bells of Steel

Out-train back pain and upper body mobility limitations while building lower body strength. The Belt Squat Machine is space-efficient and versatile, unlocking endless exercises for your home gym at an unbeatable price. Built like a tank, this beast boasts an impressive 700lb capacity (step aside, Hip Thrust Machine ). Plus, its innovative design features commercial-grade Zerk bearings and band pegs for improving your lockout strength. Despite its beastly strength, this strength machine is a gentle giant in your gym space.

by Bells of Steel

The Utility Horn easily mounts on your rack for quick access to your Olympic weight plates , bands, or chains — whatever you need handy up to 100lbs (or 132lbs for Manticore). It keeps your stuff off the floor to give you more room to smash your goals. The cotter pin offers extra security and stability while making it easy to move around until you find the perfect spot. Plus, the black powder coating provides rust resistance.

by Bells of Steel

Wickedly precise and boldly colored, the Competition Bumper Plates are the perfect calibrated plates for Olympic lifting. These competition bumper plates don't just look amazing, they also closely align with IWF specs and outperform all-black bumpers . While they're not IWF approved, they do check the key boxes: 450mm diameter, color-coded, and guaranteed to +/- 0.1% of the claimed weight. The galvanized center hub with its co-molded steel collar won't spin or break from the rubber and uses an innovative method to securely lock the bolts in place.

by Bells of Steel

Wall-mounted Foam Roller Storage saves floor space, is adaptable to any foam roller length, and fits foam rollers up to 6" in diameter. Designed to work like a can dispenser of ye olden days of the 1980s, this storage system will keep your foam rollers neatly stacked and off of the floor, preventing any mishaps that set you a PR in medical bills. IMPORTANT: Mounting hardware is included. Brackets must be securely mounted to a wall stud or concrete wall for user and equipment safety.

by Bells of Steel

Broaden the weight range of your adjustable kettlebell to 9-11.5kg! This plastic bottom shell weighs just 0.7kg (1.5lb), making your empty Adjustable Kettlebell as light as 9kg (19.6lb). That's 3kg less than an empty full-steel version! Access the 9.5-11.5kg (20-25lb) increments using your kettlebell plates. The lighter range is great for single-arm exercises or beginners who don't want to shell out the money for a lighter kettlebell . Weight increments: - 9kg (empty) - 9.5kg - 10kg - 10.5kg - 11kg - 11.5kg IMPORTANT: Warranty is void if dropped.

by Bells of Steel

The Utility Hook is the smallest—but mightiest—gym storage solution. This solid steel s-hook easily slides into tubing holes up to 11 gauge (2.9mm thick). Organize your cable attachments along the center upright of your All-in-One Trainer . Hang lifting chains off the sides of the rear upright on your Cable Tower . Store your barbell across two hooks on a 76" wide Hydra Universal Storage System. And this is just the beginning. Beyond your gym's space restrictions, the only limit is your creativity. Don't be surprised if you get hooked .

by Bells of Steel