Bells of Steel Roller J-Cups

The Light Commercial Power Rack is the best value rack on the market, featuring a plethora of accessories to bring your home training to the next level. Roller j-cups allow you to safely and easily position your barbell exactly where you need before you start your lift. The nylon sandwich jcups offer full barbell protection and a whopping 880lb static weight capacity (600lb warrantied).

by Bells of Steel

You may be more than a pretty face, but dropping a loaded barbell while benching certainly won’t improve things. Stay safe while benching or squatting with the heavy-duty Spotter Arms Attachment! Or use them as a secondary squat/bench station for barbell supersets! UHMW lining protects your barbell from damage, while the Manticore version boasts extra UHMW to keep your rack uprights in tip-top shape. - 60mm version: compatible with our 60mm racks and non-B.o.S. 2.3" x 2.3" racks with 5/8" holes. - Hydra version: compatible with our Hydra racks and non-B.o.S.

by Bells of Steel

With this Half Rack, your home gym will be so optimized that they'll be calling you The Jacked Effi-cionado. Its 1,000-pound capacity outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks. By matching the same tubing specs as many of our American competitors, you can mix and match attachments freely without needing to stick to one brand - hello, open ecosystem!

by Bells of Steel

Remember the bench station at the gym you grew up going to? Two posts, open front, clean and simple. This is that, but better. The two-post setup uses one pair of 60" uprights at the back and the Converter Bench’s own front foot on the other end. Front foot stabilizers keep everything locked in place. Add your choice of j-cups and spotter arms for safe solo training that the old commercial gym benches never had. It’s less expensive than the four-post setup but gives you the same dedicated bench station experience.

by Bells of Steel

The world is your oyster with this handy-dandy rack attachment. Use it as a second pull-up bar on your power rack or add it to a pair of lever arms to unlock barbell and machine-inspired exercises at home — hip thrusts, thrusters, rows, deadlifts, you name it! The beefy 6-gauge steel promises solid construction while the different finishes offer plenty of variety. With a max capacity of 500lbs, these adjustable pull-up bars are meant to withstand heavy weights. Choose the option that suits your power rack or cable tower.

by Bells of Steel

Store a barbell above your power rack, converting it into a useable pull-up station - for smarter storage AND a bigger back. The 3D-printed Hydra Barbell Holder Rack Attachment is made to fit perfectly on true 3" x 3" tubing with 5/8" holes but will fit smaller racks with a DIY shim. With a 500lb capacity, this versatile storage solution will hold barbells up to 32mm in diameter. Place your barbell across the power rack for a makeshift pull-up station, ideal for lifters with a Lat Pulldown attachment.

by Bells of Steel

Save your back (and your bar) with the Deadlift Jack with rollers! Heavy-duty nylon rollers for easier bar centering with protective UHMW make weight changes a breeze-even at its fully loaded 800lb capacity-so you can save your strength for your next PR. IMPORTANT: Wear and tear on the nylon rollers and the protective lining is expected over time. Coarse knurling will accelerate this process.

by Bells of Steel

Supercharged with a Smith machine, this squat stand delivers rock-solid stability and an open-ecosystem design, giving you the freedom to mix and match attachments like our seal row pad, dip attachment and many more . With the Smith’s 600lb weight capacity, it’s built to handle heavy squats, big bench presses, and even pull-ups. The flat foot support system keeps things extra sturdy, offering a large contact surface area for stability when racking/unracking your bar, doing dips, or hammering out pull-ups without any unexpected acrobatics.

by Bells of Steel

From commanding Six Posts to classic Four Posts to space-saving Folding Racks, we have pre-built power racks that fit the biggest AND smallest spaces. But, no gym is complete without a quality barbell & bench. Grab an ultra-versatile multi-purpose barbell or an adjustable bench to hit every angle. And if you’re a competitive athlete, we offer specialty choices whether you compete in powerlifting, bodybuilding, or professional cheese-rolling . Plus, save big when you buy in bulk!

by Bells of Steel

The Hydra 4-Post Power Rack is a powerhouse for any serious home gym. Built with heavy-duty 3" x 3" (76.2mm x 76.2mm) 11-gauge steel and a 1,000lb weight capacity, it’s designed for squats, bench presses, pull-ups, and more. Laser-cut numbers ensure precise attachment alignment, and the open ecosystem design giving you the freedom to mix and match attachments like our seal row pad, dip attachment and many more . Plus, its modular build allows future expansion or reconfiguration to fit your space and training needs.

by Bells of Steel

Hydra Lever Arms simulate DOZENS of machine exercises in only a fraction of the space & without a jaw-dropping price tag. Add an Adjustable Pull-Up Bar for even more versatility (hip thrusts and leg presses, anyone?) Height and handle adjustments are simple, so you can find your perfect placement. These space-efficient attachments (sold in pairs) add only 4.5" to the front of your rack when not in use and tuck nicely inside racks with a minimum 43" depth. With a 500lb weight capacity and two handle styles to choose from, you're set for life.

by Bells of Steel

Designed for the powerlifting purist or swolo artist who prefers to train alone, this adjustable Monolift Attachment delivers the stability, safety, and slick functionality of a full monolift setup, without eating up your rack space or wallet. The cantilever-style swing-back design improves bar clearance for squats and presses, so you can unrack and lift with zero wasted motion. Once the bar’s up, the arms swing cleanly out of the way, giving you more room to squat deep and lift heavy without smashing into hooks.

by Bells of Steel

Building your booty has never been this easy! Well, the set-up, that is. The heavy lifting is still up to you. This hip thrust machine will make your reps count. Its angled footplate allows for a deep stretch in the bottom of the exercise, without needing gymnast-level ankle flexibility. And with the pivoting pad, your back is supported from rock bottom to full extension. The 31.75” x 18.75” footplate of this hip thrust machine is spacious enough to accommodate big feet and wider stances.

by Bells of Steel

Weighing in at a beefy 73lbs for maximum stability, the Squat Stands 3.0 can be used in home gyms or commercial settings, for instance, weightlifting clubs. Superior 1" spacing through the bench and pull zone and 2" spacing above and below allow you to select the perfect height for your j-cups, for precision lift-offs that can make the difference between a good rep and a superb rep. Trying to decide between squat stands and a power rack? Then check out Squat Stands vs Power Racks: How to Choose .

by Bells of Steel

A barbell and a rack? Everyone has that. A Viking press landmine attachment in the corner? That's a different gym... and a different kind of shoulder day. Dust off the beater bar. Drop it into a landmine , load plates, slide the attachment over the sleeve, lock the knob. You're doing the viking press exercise in under a minute, no Strongman meet required. FOUR GRIP POSITIONS. 2 neutral, 2 regular. Narrow or wide, palms in or palms forward: press the way your shoulders actually want to move.

by Bells of Steel

Your college days might be over, but it's not too late to do another keg stand train like a varsity athlete. Its 1,000-pound capacity outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks. By matching the same tubing specs as many of our American competitors, you can mix and match attachments freely without needing to stick to one brand - hello, open ecosystem!

by Bells of Steel

Bid a not-so-fond farewell to impossibly tangled bands, sweat-soaked support wear, and chaotically misplaced Barbell Collars . You'll never look like one of those poor, helpless saps who can't do anything right in an infomercial again. Mount it directly to your wooden wall studs, your concrete wall, or your power rack (Hydra, Manticore or 2.3”) to keep your accessories secure, out of the way, and readily accessible for your next lifting masterpiece!

by Bells of Steel

Replacement monitor for the Blitz Bike & Residential Blitz Bike .

by Bells of Steel

The Flat Foot Power Rack is where classic design and rock-solid stability team up with a chalky fist bump of swoleship. Its 1,000-pound capacity outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks. By matching the same tubing specs as many of our American competitors, you can mix and match attachments freely without needing to stick to one brand - hello, open ecosystem!

by Bells of Steel

This squat stand is to home gyms what the Double Double is to Canada — simple, powerful, and a cultural phenomenon. Its 1,000-pound capacity outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist - just bolt it down before you go trying for that new chin-up PR. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks.

by Bells of Steel

We married two Cable Towers together using a Bare Steel Pull-Up Bar to create a joyous union for your home gym. And just like that, a multi-use cable tower/squat stand station was born! Add a set of J-Cups , and you’re ready to squat! Or bench. Or anything else, really. Olympic Weight Plate loadable sleeves keep costs low and possibilities high, while the 210-pound Weight Stack version is the crème de la crème of convenience. Dual Nylon Adjustable Handles on the upright with 30+ height settings create... 30, carry the 1...endless possibilities!

by Bells of Steel

A replacement seat pad (smaller pad, for the butt) for the Buzzsaw Bench . Compatible with: - Buzzsaw Bench (BSAW-BEN) - Buzzsaw Bench (BLUT-BSAW2-BEN) - Buzzsaw Bench (SPU-BSAW2-BEN) - Buzzsaw Bench (BSAW2-BEN)

by Bells of Steel

These commercial-grade dumbbells are hex -ceptionally priced. Our hex dumbbells are made of 50% virgin and 50% recycled rubber — the perfect blend of environmentally-friendly and durable materials to reduce the noise and impact they make against your home gym flooring . Their chrome-plated handles are resistant to corrosion and rust and are ergonomically shaped for a comfortable grip. Plus, they feature fully-welded heads to maximize longevity. Prefer a consistently straight handle to hold? Straight Handle Dumbbells are also available.

by Bells of Steel

It's time to bump up your lifting game. These crumb bumper plates have a thick stainless steel insert ring with 3 anchor points to prevent common bumper breakdowns. The crumb material is quieter than urethane bumpers. Ideal for lifters who don't have a platform and features coloured flecks for easier weight identification. The number one advantage of bumpers is safety for the lifter. A lifter who hesitates to dump a bad lift because they're afraid of damage to the floor or the equipment is more likely to get hurt. Bumpers take any worry about damage completely out of the equation.

by Bells of Steel