Starrett 161C Toolmakers Parallel Clamp

Made in USA Starrett Model No. 161A D esigned for maximum strength & rigidity 1-1/4" (32mm) Capacity 13/16" (20.5mm) Throat Depth E xtremely useful for holding work together in tapping & drilling & on various machine setups R ounded jaws permit clamping under shoulders or in recesses R etaining clip holds the loose jaw in alignment when clamp is opened or closed Manufactured with hardened steel Sold as one single clamp piece each Product Description Specs The Starrett 161 Toolmakers' Parallel Clamp features a single clamp (1-1/4") with 13/16" throat depth.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Starrett Model No. 161B D esigned for maximum strength & rigidity 1-3/4" (44mm) Capacity 1" (25mm) Throat Depth E xtremely useful for holding work together in tapping & drilling & on various machine setups R ounded jaws permit clamping under shoulders or in recesses R etaining clip holds the loose jaw in alignment when clamp is opened or closed Manufactured with hardened steel Sold as one single clamp piece each Product Description Specs The Starrett 161 Toolmakers' Parallel Clamp features a single clamp (1-3/4") with 1" throat depth.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Starrett Model No. 160 (ea.) - Sold as one clamp Toolmaker's Clamp / Mini Vise Steel, Case hardened, with two takeup blocks, smaller block yields up to 2" capacity 3-1/4" length x 3/4" width of base of vise / clamp Sold as one single clamp piece each Product Description Specs The Starrett 160 Toolmaker's Clamp / Mini Vise. Steel, Case hardened with two takeup blocks, smaller block yields up to 2" capacity, blocks also allow a slight swivel action 8 degree to 10 degree off of 90 degree. There is a countersunk hole which may be used to fasten to the bench as a vise. Made in USA.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Starrett Model No. 240B Special tapered collet, providing maximum clamping surface Capacity: .025" to .075" Product Description Specs Starrett 240B Pin Vise with a s pecial tapered collet, providing maximum clamping surface . S maller body diameter than the chuck to allow fast opening and closing and rapid rotation when used on small work. Available individually or as a complete set in a convenient case. Made in USA.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Starrett Model No. 165 Double end pin vise with knurled handle Reversible collets with two size capacities at each end Capacity: 0" to .125" Product Description Specs This Starrett 165 pin vise is useful for securely holding small stock, taps, drills, reamers, scribers, wire, small files, & other tools. The jaws are hardened & with a few turns of the binding nut, a firm grip may be obtained . Made in USA.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

U-shaped jaws for visibility and working space. Holds work in proper alignment. Specifications: Size: 9" Jaw Range: 2-3/4" Depth: 1-5/8"

by Coastal Tool · West Hartford, CT

🚚 Free shipping on orders over $199 · Ships from Connecticut

Made in Germany Model No. TG7.016 - "TG series" Bessey Clamps Malleable cast iron fixed jaw & sliding arm generate powerful, rigid clamping 16" max opening - 7" throat depth Maximum safety with the integrated anti-slip system - A set screw molded into the sliding arm interlocks with the serration on the rail 1320 lbs. clamping pressure Plastic pressure caps protect the work piece surface Product Description Specs These Bessey Medium-Duty Steel Bar Clamps heads are made of tough malleable cast iron.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Germany Model No. TG4.016 - "TG series" Bessey Clamps Malleable cast iron fixed jaw & sliding arm generate powerful, rigid clamping 16" max opening - 4" throat depth Maximum safety with the integrated anti-slip system - A set screw molded into the sliding arm interlocks with the serration on the rail 880 lbs. clamping pressure Plastic pressure caps protect the work piece surface Product Description Specs These Bessey Light-Duty Steel Bar Clamps heads are made of tough malleable cast iron.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Will not walk off center - Free-floating jaws adjust to un-parallel surfaces Eliminates the distorting & twisting of your work pieces & provides a strong, 4:1 clamp ratio Three different gripping faces: Knurled, smooth & V-slot for holding round stock Deep throat clamps allow for a deeper grab on items High tensile steel plates Copper plated jaws, screw & T-handle are ideal for welding - Great for spot welding, drilling, bolting Product Description Specs These "Kant-Twist" cantilever d eep throat clamps allow for a deeper grab on the clamped objects &amp…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

6" clamping jaw capacity 2-7/16" throat depth 140 lb. clamping force For use in clamping & gluing, holding work for sawing & drilling, & positioning work for fastening Patented pistol grip design enhances comfort and ease of use Non-marring pads grip firmly & protect work Product Description Specs A 6" Quickgrip light duty bar clamp made by Irwin Tools. This small bar clamp is great for clamping & gluing, holding work for sawing & drilling, & positioning work for fastening. Great for working in confined spaces. 6" clamping jaw capacity & 140 lb. clamping force.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Swivel pads for holding without damaging work surface. Features: Wide-opening jaws provide greater versatility in clamping a wide variety of shapes. Adjusting…

by Coastal Tool · West Hartford, CT

🚚 Free shipping on orders over $199 · Ships from Connecticut

8" clamping capacity Light duty clamp Great for working in confined areas For use in clamping & gluing, holding work for sawing & drilling, & positioning work for fastening One-handed style - Pistol grip design enhances comfort and ease of use Reversible jaw converts clamp to spreader Non-marring pads grip firmly & protect work 50 lb. clamping force Product Description Specs A very handy small 8" quickgrip style clamp made by Channellock. This mini bar clamp is great for clamping & gluing, holding work for sawing & drilling, & positioning work for fastening.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Alfa Tools Crimped Wire Wheel 2" diameter wheel Coarse 1/4" shank - 1" length 0.012" Wire Diameter 6000 RPM max Product Description Specs Alfa Tools 2" Coarse Wire Wheel - 1/4" Shank. 0 .012" Wire Diameter. 6000 RPM max. All-steel construction. Applications include deburring, blending, removal of rust, scale, dirt, & finish preparation prior to painting or plating. Made by Alfa Tools. Made in Spain.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Classic & original shirt 100% spun soft cotton Adult male fit Available in S, M, L, XL, & XXL Product Description Specs The classic & iconic "I Got Hammered at Hardwick's" T-shirt. The shirt is made of heavyweight 100% spun soft cotton & the shirt color is in a nice ash gray color with jet black lettering print. Double needle sleeves & hem for durability. A customer favorite!

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Thexton Part No. 561 Thexton Universal Rear Shock Mounting Bolt Kit Un-opened package Product Description Specs Thexton Universal Rear Shock Mounting Bolt Kit. Part No. 561 . Thexton Manufacturing Company, Minneapolis MINN. Product Thexton Universal Rear Shock Mounting Bolt…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan Olfa Model No. KB4-F/5 Great for intricate cuts on delicate materials 5 blades in pack Japanese premium carbon tool steel 8 mm wide cutting edge Designed for Olfa AK-4 knife & AK-1 knife Product Description Specs These Olfa KB4-F/5 Precision Straight Art Blades are great for making precise, sharp cuts. It's perfect for trimming & deburring plastics, wood, films, narrow cuts & crosscuts. Made from high-quality carbon tool steel, this art blade is perfect for the OLFA Cushion Grip Precision Art Knife (AK-4) & the AK-1/5B Graphic Art Knife. Made in Japan.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA · C.S. Osborne ~ Since 1826 Model No. 265 Rawhide palm with riveted joints Iron thimble with heavy duty vinyl attached to rawhide Excellent for leather & canvas Available in both left hand & right hand Product Description Specs A quality USA-made sail palm made by C.S. Osborne. The palm is excellent for sewing leather, canvas, & similar materials. The iron thimble is bound to the rawhide palm. Available in both right & left hand. Made in the USA. From the Manufacturer: Since 1826, the Osborne family had dedicated itself to providing the very finest tools.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Model No. 807 Great for reaching hard to get at screws 1/4" slotted & 3/8" slotted Blades are made of machined, ground & hardened tool steel Drive rotation can be reversed instantly 4" overall length Product Description Specs This Ratcheting Offset Screwdriver with slotted blades is ideal for use where screws are concealed or obstructed, leverage is required, or where turning space is limited. 1/4" slotted & 3/8" slotted.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Trewax Heavy-Duty Floor Stripper Wax Stripper for vinyl, stone, & tile floors 32 fl oz container Product Description Specs Trewax's no scrub formula is a combination of emulsifiers that quickly and easily penetrate and lift all brands of floor finishes for easy pick up with a mop or wet vacuum. Safe for any surface except wood. Easy-to-use without any offensive odors. Covers approximately 640 sq ft, depending on how porous the flooring is and how many coats of wax need removed. Concentrated. 32 fl oz.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Number "6" house number Made of die-cast aluminum material - Black hammered look 3-1/2" size Includes two small nails Product Description Specs Number Six Black Hammered House Number in a 3-1/2" Size. M ade of die-cast aluminum material with a black hammered style . Mounting nails included. #6 House Number. Hy-Ko Model No. DC-3/6.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Number "5" house number Made of solid brass material - Lacquered finish 4" size 1/4" thickness Includes two flat head phillips screws Product Description Specs Number Five Solid Brass House Number in a 4" Size. M ade of solid brass material - 1/4" thickness . Lacquered brass finish . Includes two flat head phillips screws. #5 House Number. Hy-Ko Model No. BR-90/5.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Germany Model No. 63806129067 (1) sanding pad with no holes (1) felt polishing pad (5) pieces of 40 grit sanding sheets - no holes (5 ) pieces of 80 grit sanding sheets - no holes ( 5 ) pieces of 120 grit sanding sheets - no holes (5) pieces of 220 grit sanding sheets - no holes (5) pieces of 320 grit sanding sheets - no holes (5) pieces of 400 grit sanding sheets - no holes (5) pieces of 600 grit sanding sheets - no holes (5) pieces of 800 grit sanding sheets - no holes Product Description Specs Fein Stone Sanding & Polishing Set - 63806129067 . Made in Germany.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

White painted finish on steel material 5/8" radius corners 4" x 4" size hinge Button tip Removable pin Includes flat head screws Sold as three hinges in pack Product Description Specs Three 4 " White Painted Door Hinges with 5/8" radius corners & a removable pin. White color finish on steel material. Countersunk holes. Includes flat head screws. 4" x 4" door hinge size. Five knuckle, full mortise design. Ultra Hardware No. 61756.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Thexton Part No. 356 Un-opened package Product Description Specs Thexton Cooling System Flush Tool. Thexton Manufacturing Company, Minneapolis MINN. Product Thexton Cooling System Flush…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho