Starrett 161B Toolmakers Parallel Clamp

Made in USA Starrett Model No. 161A D esigned for maximum strength & rigidity 1-1/4" (32mm) Capacity 13/16" (20.5mm) Throat Depth E xtremely useful for holding work together in tapping & drilling & on various machine setups R ounded jaws permit clamping under shoulders or in recesses R etaining clip holds the loose jaw in alignment when clamp is opened or closed Manufactured with hardened steel Sold as one single clamp piece each Product Description Specs The Starrett 161 Toolmakers' Parallel Clamp features a single clamp (1-1/4") with 13/16" throat depth.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Starrett Model No. 161C D esigned for maximum strength & rigidity 2-1/4" (57mm) Capacity 1-7/32" (30mm) Throat Depth E xtremely useful for holding work together in tapping & drilling & on various machine setups R ounded jaws permit clamping under shoulders or in recesses R etaining clip holds the loose jaw in alignment when clamp is opened or closed Manufactured with hardened steel Sold as one single clamp piece each Product Description Specs The Starrett 161 Toolmakers' Parallel Clamp features a single clamp (2-1/4") with 1-7/32" throat depth.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Starrett Model No. 160 (ea.) - Sold as one clamp Toolmaker's Clamp / Mini Vise Steel, Case hardened, with two takeup blocks, smaller block yields up to 2" capacity 3-1/4" length x 3/4" width of base of vise / clamp Sold as one single clamp piece each Product Description Specs The Starrett 160 Toolmaker's Clamp / Mini Vise. Steel, Case hardened with two takeup blocks, smaller block yields up to 2" capacity, blocks also allow a slight swivel action 8 degree to 10 degree off of 90 degree. There is a countersunk hole which may be used to fasten to the bench as a vise. Made in USA.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Starrett Model No. 240B Special tapered collet, providing maximum clamping surface Capacity: .025" to .075" Product Description Specs Starrett 240B Pin Vise with a s pecial tapered collet, providing maximum clamping surface . S maller body diameter than the chuck to allow fast opening and closing and rapid rotation when used on small work. Available individually or as a complete set in a convenient case. Made in USA.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Starrett Model No. 165 Double end pin vise with knurled handle Reversible collets with two size capacities at each end Capacity: 0" to .125" Product Description Specs This Starrett 165 pin vise is useful for securely holding small stock, taps, drills, reamers, scribers, wire, small files, & other tools. The jaws are hardened & with a few turns of the binding nut, a firm grip may be obtained . Made in USA.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Germany Model No. TG4.016 - "TG series" Bessey Clamps Malleable cast iron fixed jaw & sliding arm generate powerful, rigid clamping 16" max opening - 4" throat depth Maximum safety with the integrated anti-slip system - A set screw molded into the sliding arm interlocks with the serration on the rail 880 lbs. clamping pressure Plastic pressure caps protect the work piece surface Product Description Specs These Bessey Light-Duty Steel Bar Clamps heads are made of tough malleable cast iron.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

U-shaped jaws for visibility and working space. Holds work in proper alignment. Specifications: Size: 9" Jaw Range: 2-3/4" Depth: 1-5/8"

by Coastal Tool · West Hartford, CT

🚚 Free shipping on orders over $199 · Ships from Connecticut

Made in Germany Model No. TG7.016 - "TG series" Bessey Clamps Malleable cast iron fixed jaw & sliding arm generate powerful, rigid clamping 16" max opening - 7" throat depth Maximum safety with the integrated anti-slip system - A set screw molded into the sliding arm interlocks with the serration on the rail 1320 lbs. clamping pressure Plastic pressure caps protect the work piece surface Product Description Specs These Bessey Medium-Duty Steel Bar Clamps heads are made of tough malleable cast iron.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

6" clamping jaw capacity 2-7/16" throat depth 140 lb. clamping force For use in clamping & gluing, holding work for sawing & drilling, & positioning work for fastening Patented pistol grip design enhances comfort and ease of use Non-marring pads grip firmly & protect work Product Description Specs A 6" Quickgrip light duty bar clamp made by Irwin Tools. This small bar clamp is great for clamping & gluing, holding work for sawing & drilling, & positioning work for fastening. Great for working in confined spaces. 6" clamping jaw capacity & 140 lb. clamping force.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

4" clamping capacity Light duty clamp Great for working in confined areas For use in clamping & gluing, holding work for sawing & drilling, & positioning work for fastening One-handed style - Pistol grip design enhances comfort and ease of use Reversible jaw converts clamp to spreader Non-marring pads grip firmly & protect work 50 lb. clamping force Product Description Specs A very handy small 4" quickgrip style clamp made by Channellock. This mini bar clamp is great for clamping & gluing, holding work for sawing & drilling, & positioning work for fastening.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

8" clamping capacity Light duty clamp Great for working in confined areas For use in clamping & gluing, holding work for sawing & drilling, & positioning work for fastening One-handed style - Pistol grip design enhances comfort and ease of use Reversible jaw converts clamp to spreader Non-marring pads grip firmly & protect work 50 lb. clamping force Product Description Specs A very handy small 8" quickgrip style clamp made by Channellock. This mini bar clamp is great for clamping & gluing, holding work for sawing & drilling, & positioning work for fastening.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Will not walk off center - Free-floating jaws adjust to un-parallel surfaces Eliminates the distorting & twisting of your work pieces & provides a strong, 4:1 clamp ratio Three different gripping faces: Knurled, smooth & V-slot for holding round stock Deep throat clamps allow for a deeper grab on items High tensile steel plates Copper plated jaws, screw & T-handle are ideal for welding - Great for spot welding, drilling, bolting Product Description Specs These "Kant-Twist" cantilever d eep throat clamps allow for a deeper grab on the clamped objects &amp…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Number "5" house number Made of solid brass material - Lacquered finish 4" size 1/4" thickness Includes two flat head phillips screws Product Description Specs Number Five Solid Brass House Number in a 4" Size. M ade of solid brass material - 1/4" thickness . Lacquered brass finish . Includes two flat head phillips screws. #5 House Number. Hy-Ko Model No. BR-90/5.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Model CBC813 Multi-purpose cutter features three tunsten carbide cutting: Two scoring & one chiseling Professional grade tool ideal for scoring laminates, roof tiles, fiberglass roofing shingles, floor tiles, & cement backer boards Works well to chisel-cut material by digging it away 7-1/2" overall length Product Description Specs Marshalltown Carbide Cement Board Cutter. Multi-purpose cutter features three tunsten carbide cutting: Two scoring & one chiseling.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Milwaukee 1/2" Socket Adapter to 1/4" Hex 2" overall length Sold as one bit in pack Product Description Specs Milwaukee 1/2" Socket Adapter to 1/4" Ball Hex. Insert Bit - 2" Long. Shockwave Bit. Made by Milwaukee Tool. Product Title Overall Length Model # Milwaukee 1/2" Socket Adapter to 1/4" Hex 2"…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan 4" overall length Easy change reversible ratchet direction Flexible head 3/8" DR Chrome Vanadium Steel Product Description Specs This 4" Stubby Ratchet 3/8" Dr with Flex Head is made of C hrome Vanadium Steel. Easy change reversible ratchet direction. 4" overall length. 3/8" drive. Flexible head. Made in Japan. Hardwick & Sons is pleased to offer quality tools from Japan for the many people who desire special & well-crafted tools.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA · C.S. Osborne ~ Since 1826 Model No. 265 Rawhide palm with riveted joints Iron thimble with heavy duty vinyl attached to rawhide Excellent for leather & canvas Available in both left hand & right hand Product Description Specs A quality USA-made sail palm made by C.S. Osborne. The palm is excellent for sewing leather, canvas, & similar materials. The iron thimble is bound to the rawhide palm. Available in both right & left hand. Made in the USA. From the Manufacturer: Since 1826, the Osborne family had dedicated itself to providing the very finest tools.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Palm Wood blank 6" x 3/4" x 3/4" size Wooden blank for pen wood turning Sold as single piece Product Description Specs Palm Wood Blank . 6" length x 3/4" height x 3/4" width size. Pen turning blank. Exotic Wood Blank. Wood grain & color shade may vary from wood blank to wood blank. No exchanges based on wood grain & color.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Used - good condition PEC Telescoping Gage ~ 1-1/4" to 2-1/8" Range Product Description Specs PEC Telescoping Gage ~ 1-1/4" to 2-1/8" Range. Product PEC Telescoping Gage ~ 1-1/4" to 2-1/8"…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Germany Model No. 63903193018 For cutting various soft materials, e.g. felt, leather, polystrene, & many others Sold as one blade in pack Product Description Specs Fein Concave Segment Blade - 63903193018 . For cutting various soft materials, e.g. felt, leather, polystrene, & many others. Made in Germany.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Thexton Part No. 356 Un-opened package Product Description Specs Thexton Cooling System Flush Tool. Thexton Manufacturing Company, Minneapolis MINN. Product Thexton Cooling System Flush…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Antique Nickel finish on steel material 5/8" radius corners 4" x 4" size hinge Button tip Removable pin Includes flat head screws Sold as two hinges in pack Product Description Specs A pair of 4 " Antique Nickel Door Hinges with 5/8" radius corners & a removable pin. Antique Nickel finish on steel material. Countersunk holes. Includes flat head screws. 4" x 4" door hinge size. Five knuckle, full mortise design. Ultra Hardware No. 35049.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Zinc-plated steel #6 size Available as singles, or in a bulk box Product Description Specs #6 washer in zinc-plated steel material. Available as singles, or in a bulk box of 100 pcs. Hardwick & Sons is pleased to offer vintage-style hardware for the many people who desire to fashion their homes with charm, quality, & style. The traditional-style hardware that we showcase are true & faithful reproductions of classic hardware pieces found in the many homes from across America throughout the past century.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Classic & original shirt 100% spun soft cotton Adult male fit Available in S, M, L, XL, & XXL Product Description Specs The classic & iconic "I Got Hammered at Hardwick's" T-shirt. The shirt is made of heavyweight 100% spun soft cotton & the shirt color is in a nice ash gray color with jet black lettering print. Double needle sleeves & hem for durability. A customer favorite!

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho