Jacato Japanese Panel Z-Saw with Starter Beak 150 mm

Made in Japan Z-Saw replacement blade #7011 For use with Z-Saw #H-150 | #7010 See here Crosscut Teeth: 19 TPI Starting "beak" tooth allows for starting a cut in the middle of the board Semi-fine cutting blade Impulse Hardened Teeth Product Description Specs This Japanese Z-saw replacement blade is a good semi-fine woodworking blade. It's great for general lumber, hard & soft woods, for plywood, & for laminate board too. The blade has a special starting "beak" tooth, which allows you to start a cut in the middle of a wood panel.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan Z-Saw #H-240 | #7026 Semi-fine cutting pull-saw Starting "beak" tooth allows for starting a cut in the middle of the board Crosscut Teeth: 18 TPI Impulse Hardened Teeth Blade is removable. See replacement blade here Product Description Specs This Japanese Z-Saw is a good semi-fine woodworking saw for the finish carpenter, cabinet maker, & or furniture maker. The saw works well for medium to fine cutting jointery, & produces good clean & smooth cuts. With a starting "beak" tooth, this saw allows you to start a cut in the middle of a wood panel.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan Z-Saw #H-250 | #15006 Semi-fine cutting pull-saw Crosscut Teeth: 19 TPI Impulse Hardened Teeth Blade is removable. See replacement Crosscut blade here . See replacement Rip blade here . Product Description Specs This Japanese Z-Saw is a good semi-fine woodworking saw for the finish carpenter, cabinet maker, & or furniture maker. The saw is good for medium-sized pieces of wood & designed for making deep cuts for wood joineries or other precise woodwork, & produces good clean & smooth cuts. It is a good saw for both soft & hardwoods.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan Z-Saw #H-265 | #15003 Great general purpose pull-saw Crosscut Teeth: 15 TPI Impulse Hardened Teeth Blade is removable. See replacement blade here Product Description Specs This Japanese Z-Saw is an excellent go-to-saw for general purpose woodworking. With no metal spine back, it allows you to do all kinds of cuts, including miter cuts, deep cuts, quick cut-offs at 90°, or other unusual cuts. It is a good saw for general lumber, soft & hard woods, & for plywood & laminate board too.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan Z-Saw #H-300 | #15011 Coarse & fast cutting pull-saw Crosscut Teeth: 13 TPI Impulse Hardened Teeth Blade is removable. See replacement Crosscut blade here . See replacement Rip blade here . Product Description Specs This Japanese Z-Saw is a fast cutting & coarse pull-saw for general purpose rough work, house framing, or a quick cut off for 2 x 4 or 2 x 8 materials. It is a good saw for general lumber, soft & hardwoods, laminate board & plywood. The handle is long too for longer & more powerful strokes when sawing.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan Z-Saw #240 "Dekora" Semi-flexible blade Crosscut Teeth: 18 TPI 1-1/4" narrow blade - great for tight areas Wooden handle Blade is removable. See replacement blade here Product Description Specs A small semi-flexible Japanese pull-saw that's great for general lumber, hardwoods, softwoods, plywood, dry bamboo, plastics & laminates. The blade has 18 TPI which makes for nice fine cuts on materials. Most woodworkers would find this as a good utility saw. The blade depth is 1-1/4" which allows the saw to get into tight areas.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan Z-Saw #H-225 | #15018 Fine finish-carpentry pull-saw Crosscut Teeth: 22 TPI Impulse Hardened Teeth Blade is removable. See replacement blade here Product Description Specs This Japanese Z-Saw is a fine woodworking saw for the finish carpenter, cabinet maker, & or furniture maker. It is one of our most fine pull-saws without a spine along the blade back. The saw is designed for making deep cuts for wood joineries, & or other precise intricate woodwork, & produces good clean & smooth cuts.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan Z-Saw replacement blade #15007 For use with Z-Saw #H-250 | #15006 See here Crosscut Teeth: 19 TPI Semi-fine cutting blade Impulse Hardened Teeth Product Description Specs This Japanese Z-Saw replacement blade is a good semi-fine woodworking saw blade for the finish carpenter, cabinet maker, & or furniture maker. The blade is good for medium-sized pieces of wood & designed for making deep cuts for wood joineries or other precise woodwork, & produces good clean & smooth cuts. It is good for both soft & hardwoods.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan Gyokucho Saw #290 Compact sized saw - great for a toolbox Crosscut Teeth: 18 TPI Impulse Hardened Teeth Black hard plastic handle with EVA coated grip Blade is removable. See replacement blade here Product Description Specs This Japanese pull-saw is a good general purpose woodworking saw for smaller-medium projects. It's handy for general lumber, for plywood, & for laminate board too. The saw features a metal spine back which gives the saw very accurate straight cuts, & the blade has a special rounded nose which allows the ability to start in the middle of a panel.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan Z-Saw replacement blade #7027 For use with Z-Saw #H-240 | #7026 See here Crosscut Teeth: 18 TPI Semi-fine cutting blade Starting "beak" tooth allows for starting a cut in the middle of the board Impulse Hardened Teeth Product Description Specs This Japanese Z-saw replacement blade is a good semi-fine woodworking blade for the finish carpenter, cabinet maker, & or furniture maker. The saw blade works well for medium to fine cutting jointery, & produces good clean & smooth cuts.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan Z-Saw #H-333 | #15014 Heavy duty & extra coarse pull-saw Crosscut Teeth: 10 TPI Impulse Hardened Teeth Blade is removable. See replacement blade here . Product Description Specs This Japanese Z-Saw is the strongest & roughest of the Japanese pull-saws for woodworking we have. Used for timber framing & general construction, for house framing & or a quick cut off for 2 x 4 or 2 x 8 materials; it is a great saw for both soft & hardwoods. The handle is extra long too for longer & more powerful strokes.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan Z-Saw replacement blade #15004 For use with Z-Saw #H-265 | #15003 See here Crosscut Teeth: 15 TPI Great all-purpose blade Impulse Hardened Teeth Product Description Specs This Japanese Z-Saw blade is excellent for general purpose woodworking. With crosscut teeth of 15 TPI, It is a good saw blade for general lumber, soft & hard woods, & for plywood & laminate board too. The teeth are impulse hardened which makes the blade tough & durable for prolonged life & wear. See here for the Z-Saw #H-265 | #15003. Made in Japan.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Model No. 8071 Great for reaching hard to get at screws #1 & #2 Phillips - 1/4" & 3/8" slotted bits Blades are made of machined, ground & hardened tool steel Drive rotation can be reversed instantly 4" overall length Knurled bits allow screws to be finger tightened Product Description Specs This is a Ratcheting Screwdriver with #1, #2 Phillips & 1/4", 3/8" slotted bits & a pass-through handle is ideal for use where screws are concealed or obstructed, leverage is required, or where turning space is limited.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Adjustable Frame Accepts 10" & 12" Hacksaw Blades 16" overall length Two Cutting Positions & 3-1/2" Cutting Depth Product Description Specs An Adjustable Frame Hacksaw is ideal for cutting glass, ceramic tile, hardened steel or bone, & variety of other materials at home or on a job site. It has two cutting positions & 3-1/2" cutting depth. Accepts 10" & 12" hacksaw blades.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Palm Wood blank 6" x 3/4" x 3/4" size Wooden blank for pen wood turning Sold as single piece Product Description Specs Palm Wood Blank . 6" length x 3/4" height x 3/4" width size. Pen turning blank. Exotic Wood Blank. Wood grain & color shade may vary from wood blank to wood blank. No exchanges based on wood grain & color.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Model CBC813 Multi-purpose cutter features three tunsten carbide cutting: Two scoring & one chiseling Professional grade tool ideal for scoring laminates, roof tiles, fiberglass roofing shingles, floor tiles, & cement backer boards Works well to chisel-cut material by digging it away 7-1/2" overall length Product Description Specs Marshalltown Carbide Cement Board Cutter. Multi-purpose cutter features three tunsten carbide cutting: Two scoring & one chiseling.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

3M Model 62093H1-DC Designed for use for mold remediation, sanding/scraping lead based paint in accordance with local government regulations or guidance Product Description Specs This 3M Demolition & Renovation Respirator is for u se for particulates during sawing, sanding, & grinding. Balanced design for more comfort. Can be used for sanding and scraping of lead-based paint in certain projects. NIOSH (National Institute for Occupational Safety and Health) approved: P100. Replacement filter cartridge available . NIOSH approved: Organic vapor/acid gas/P-100.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Model LS087 Forged & tempered 5/8" width of square end 3/4" width of leaf end 9-1/2" overall length Product Description Specs These Marshalltown QLT Ornamental Tools are forged & tempered. This small tool has a trowel end & square end that are used to detail foam shapes & unusual wall surfaces. Ideal for working in small areas . Product Overall Length Square End Width Leaf End Width Model # Marshalltown Small Tool Leaf & 5/8" Square 9-1/2" 5/8" 3/4"…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

All steel tri-square 9" size Beams & blades are precision ground Hardened blade Product Description Specs Alfa Tools 9" Solid Steel Square. Made from high quality tool steel. Squares have true right angle inside & outside. Beams & blades are precision ground. Blade is hardened. Length of the blade is measured from inner edge of the beam to the end of the blade. All steel tri square. Made by Alfa Tools.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Milwaukee 1/2" Socket Adapter to 1/4" Hex 2" overall length Sold as one bit in pack Product Description Specs Milwaukee 1/2" Socket Adapter to 1/4" Ball Hex. Insert Bit - 2" Long. Shockwave Bit. Made by Milwaukee Tool. Product Title Overall Length Model # Milwaukee 1/2" Socket Adapter to 1/4" Hex 2"…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan Japanese Tile Nipper 8" long size Product Description Specs Japanese Tile Nipper. Made in Japan. Product Overall Length Japanese Tile Nipper 8" For California Residents: WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

11" overall length Angled chisel on one end for prying Nail puller on the other end Product Description Specs A basic small length mini c rowbar. Pull, pry & straighten, with an angled chisel on one end for prying & lifting, & the other end of crow bar is slotted for pulling nails. A "seconds" crow bar prybar.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Thexton Part No. 356 Un-opened package Product Description Specs Thexton Cooling System Flush Tool. Thexton Manufacturing Company, Minneapolis MINN. Product Thexton Cooling System Flush…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional & classic Made of genuine glass Attractive "Black" colored glass Non-lacquered brass finish on brass base (will patina naturally over time) Includes a 8-32 thread machine truss-head screw which allows for invisible rear mounting Product Description Specs This turn-of-century reproduction glass knob has an exquisite & charming star-shaped design fitting for period cabinets & furniture. The glass is carefully set into a handsome brass base with a threaded shank in the back.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho