Jacato Replacement Blade for Japanese Z-Saw 265 mm

Made in Japan Z-Saw replacement blade #15019 For use with Z-Saw #H-225 | #15018 See here Crosscut Teeth: 22 TPI Fine finish-carpentry blade Impulse Hardened Teeth Product Description Specs This Japanese Z-Saw blade is a fine woodworking saw blade for the finish carpenter, cabinet maker, & or furniture maker. It produces good clean & smooth cuts, & is good for both soft & hard woods. The teeth are impulse hardened which makes the blade tough & durable for prolonged life & wear. See here for the Z-Saw #H-225 | #15018. Made in Japan.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan Z-Saw replacement blade #15007 For use with Z-Saw #H-250 | #15006 See here Crosscut Teeth: 19 TPI Semi-fine cutting blade Impulse Hardened Teeth Product Description Specs This Japanese Z-Saw replacement blade is a good semi-fine woodworking saw blade for the finish carpenter, cabinet maker, & or furniture maker. The blade is good for medium-sized pieces of wood & designed for making deep cuts for wood joineries or other precise woodwork, & produces good clean & smooth cuts. It is good for both soft & hardwoods.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan Z-Saw #H-265 | #15003 Great general purpose pull-saw Crosscut Teeth: 15 TPI Impulse Hardened Teeth Blade is removable. See replacement blade here Product Description Specs This Japanese Z-Saw is an excellent go-to-saw for general purpose woodworking. With no metal spine back, it allows you to do all kinds of cuts, including miter cuts, deep cuts, quick cut-offs at 90°, or other unusual cuts. It is a good saw for general lumber, soft & hard woods, & for plywood & laminate board too.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan Z-Saw replacement blade #15012 For use with Z-Saw #H-300 | #15011 See here Crosscut Teeth: 13 TPI Coarse & fast cutting blade Impulse Hardened Teeth Product Description Specs This Japanese Z-Saw replacement blade is a fast cutting & coarse pull-saw blade for general purpose rough work, house framing, or a quick cut off for 2 x 4 or 2 x 8 materials. It is good for general lumber, soft & hardwoods, laminate board & plywood. The teeth are impulse hardened which makes the blade tough & durable for prolonged life & wear. See here for the Z-Saw #H-300 | #15011.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan Z-Saw replacement blade #7104 For use with Z-Saw #H-150 | #7010 See here Crosscut Teeth: 25 TPI Very fine cutting blade Impulse Hardened Teeth Product Description Specs This Japanese Z-saw replacement blade is a very fine woodworking blade. With 25 TPI, the saw blade is excellent for tight-fitting & precise intricate woodwork, & produces very clean & smooth cuts. It is an especially great for very fine miter cuts, dovetail joints, & tenon cutting. The teeth are impulse hardened which makes the blade tough & durable for prolonged life & wear.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan Z-Saw replacement blade #15015 For use with Z-Saw #H-333 | #15014 See here Crosscut Teeth: 10 TPI Heavy duty & extra coarse blade Impulse Hardened Teeth Product Description Specs This Japanese Z-Saw blade is the strongest & roughest of the Japanese pull-saw blades for woodworking we carry. Used for timber framing & general construction, for house framing & or a quick cut off for 2 x 4 or 2 x 8 materials; it is a great saw blade for both soft & hardwoods. The teeth are impulse hardened which makes the blade tough & durable for prolonged life & wear.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan Z-Saw replacement blade #7027 For use with Z-Saw #H-240 | #7026 See here Crosscut Teeth: 18 TPI Semi-fine cutting blade Starting "beak" tooth allows for starting a cut in the middle of the board Impulse Hardened Teeth Product Description Specs This Japanese Z-saw replacement blade is a good semi-fine woodworking blade for the finish carpenter, cabinet maker, & or furniture maker. The saw blade works well for medium to fine cutting jointery, & produces good clean & smooth cuts.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan Z-Saw replacement blade #7011 For use with Z-Saw #H-150 | #7010 See here Crosscut Teeth: 19 TPI Starting "beak" tooth allows for starting a cut in the middle of the board Semi-fine cutting blade Impulse Hardened Teeth Product Description Specs This Japanese Z-saw replacement blade is a good semi-fine woodworking blade. It's great for general lumber, hard & soft woods, for plywood, & for laminate board too. The blade has a special starting "beak" tooth, which allows you to start a cut in the middle of a wood panel.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan "Dekora" Z-Saw 240 mm replacement blade For use with "Dekora" Z-Saw 240 mm See here Crosscut Teeth: 18 TPI Semi-flexible blade 1-1/4" narrow blade - great for tight areas Product Description Specs A replacement Japanese pull-saw blade for the "Dekora" Z-Saw 240 mm. The blade is semi-flexible, & great for general lumber, hardwoods, softwoods, plywood, dry bamboo, plastics & laminates. The blade has 18 TPI which makes for nice fine cuts on materials. Most woodworkers would find this as a good utility saw blade.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan Folding Z-Saw replacement blade 270 mm For use with Folding Z-Saw 270 mm "Orikko" See here Crosscut Teeth: 12 TPI 1-1/2" narrow blade - good for tight areas Teflon coated blade helps prevent blade from staining Product Description Specs A great all-purpose Japanese pull-saw blade that can be used for frame work, general lumber & dry woods, or for use in the garden & on green woods as well. It is a great saw for the professional, or the DIY homeowner alike. The blade depth is 1-1/2" which allows the saw to get into tight or difficult areas when sawing.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan Z-Saw #H-250 | #15006 Semi-fine cutting pull-saw Crosscut Teeth: 19 TPI Impulse Hardened Teeth Blade is removable. See replacement Crosscut blade here . See replacement Rip blade here . Product Description Specs This Japanese Z-Saw is a good semi-fine woodworking saw for the finish carpenter, cabinet maker, & or furniture maker. The saw is good for medium-sized pieces of wood & designed for making deep cuts for wood joineries or other precise woodwork, & produces good clean & smooth cuts. It is a good saw for both soft & hardwoods.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan Folding Z-Saw replacement blade 210 mm For use with Folding Z-Saw 210 mm "Orikko" See here Crosscut Teeth: 12 TPI 1-7/16" narrow blade - good for tight areas Teflon coated blade helps prevent blade from staining Product Description Specs A great all-purpose Japanese pull-saw blade that can be used for frame work, general lumber & dry woods, or for use in the garden & on green woods as well. It is a great saw for the professional, or the DIY homeowner alike. The blade depth is 1-7/16" which allows the saw to get into tight or difficult areas when sawing.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Trewax Heavy-Duty Floor Stripper Wax Stripper for vinyl, stone, & tile floors 32 fl oz container Product Description Specs Trewax's no scrub formula is a combination of emulsifiers that quickly and easily penetrate and lift all brands of floor finishes for easy pick up with a mop or wet vacuum. Safe for any surface except wood. Easy-to-use without any offensive odors. Covers approximately 640 sq ft, depending on how porous the flooring is and how many coats of wax need removed. Concentrated. 32 fl oz.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Model No. 8071 Great for reaching hard to get at screws #1 & #2 Phillips - 1/4" & 3/8" slotted bits Blades are made of machined, ground & hardened tool steel Drive rotation can be reversed instantly 4" overall length Knurled bits allow screws to be finger tightened Product Description Specs This is a Ratcheting Screwdriver with #1, #2 Phillips & 1/4", 3/8" slotted bits & a pass-through handle is ideal for use where screws are concealed or obstructed, leverage is required, or where turning space is limited.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

HeliCoil M5 x 0.8 Thread Repair Kit Product Description Specs HeliCoil M5 x 0.8 Thread Repair Kit. Product Title Model # HeliCoil M5 x 0.8 Thread Repair Kit DIB-574597 |…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Used - good condition PEC Telescoping Gage ~ 1-1/4" to 2-1/8" Range Product Description Specs PEC Telescoping Gage ~ 1-1/4" to 2-1/8" Range. Product PEC Telescoping Gage ~ 1-1/4" to 2-1/8"…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

All steel tri-square 9" size Beams & blades are precision ground Hardened blade Product Description Specs Alfa Tools 9" Solid Steel Square. Made from high quality tool steel. Squares have true right angle inside & outside. Beams & blades are precision ground. Blade is hardened. Length of the blade is measured from inner edge of the beam to the end of the blade. All steel tri square. Made by Alfa Tools.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Model No. 15-106A Excellent for cutting intricate patterns & irregular shapes High-grade carbon hardened & tempered blade provides clean, controlled cutting action 6-1/2" cutting depth - 360 º blade pivot at 45º increments Nickel-plated steel frame & cushion handle Cuts wood, plastic, light metal & wallboard Product Description Specs This FatMax Coping Saw has a high-grade carbon hardened & tempered blade & an ergonomically-designed cushion grip handle.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Precision 7/16" size swivel pounce wheel Designed for perforating, dotting, imprinting, tracing, quilting, embossing, overstiching, etc. Body made of Aluminum Product Description Specs Excel 7/16" Swivel Pounce Wheel. Great for tracing, pattern making, marking, quilting, sewing, wooden working & other transferring applications. Made by Excel Blades. Made in USA.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

3M Model 62093H1-DC Designed for use for mold remediation, sanding/scraping lead based paint in accordance with local government regulations or guidance Product Description Specs This 3M Demolition & Renovation Respirator is for u se for particulates during sawing, sanding, & grinding. Balanced design for more comfort. Can be used for sanding and scraping of lead-based paint in certain projects. NIOSH (National Institute for Occupational Safety and Health) approved: P100. Replacement filter cartridge available . NIOSH approved: Organic vapor/acid gas/P-100.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in England Henry Taylor Diamic Model No. F4 1" wide blade Forged, hardened & tempered blade Brass ferrule Lacquered Beech handle Product Description Specs A 1" Offset Paring Gouge made by Henry Taylor Tools in England . Offset bent blade. Henry Taylor - Diamic ~ Model No. F4. Made in UK . From the Manufacturer - About Henry Taylor: Established in 1834, Henry Taylor Tools have manufactured a wide range of quality hand-crafted tools through 3 centuries, from our forge based in Sheffield (UK).

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Classic & Traditional Timeline Style: Art Nouveau, Early 20th Century Made of solid brass material Unlacquered brass (will patina naturally over time) 5-1/4" high hook Includes two slotted oval head screws Product Description Specs A vintage-style unlacquered solid brass hall tree hook. Excellent for use in hallways, hall trees, coat racks, kitchens, & many other places. The hook is made of solid brass material, making it excellent for heavy coats & clothing. It also has a double hook, making it great to hang multiple items.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Antique Nickel finish on steel material 5/8" radius corners 4" x 4" size hinge Button tip Removable pin Includes flat head screws Sold as two hinges in pack Product Description Specs A pair of 4 " Antique Nickel Door Hinges with 5/8" radius corners & a removable pin. Antique Nickel finish on steel material. Countersunk holes. Includes flat head screws. 4" x 4" door hinge size. Five knuckle, full mortise design. Ultra Hardware No. 35049.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Milwaukee 1/2" Socket Adapter to 1/4" Hex 2" overall length Sold as one bit in pack Product Description Specs Milwaukee 1/2" Socket Adapter to 1/4" Ball Hex. Insert Bit - 2" Long. Shockwave Bit. Made by Milwaukee Tool. Product Title Overall Length Model # Milwaukee 1/2" Socket Adapter to 1/4" Hex 2"…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho