Mount-It! Heavy Duty XXL Fixed TV Wall Mount

Mount-It! MI-305B TV wall mount fits most 37 inch to 80 inch flat panel TVs with VESA mounting patterns from 100x100 mm to 600x600 mm and a maximum weight capacity of 175 lbs. This fixed mount sits 0.9 inches from the wall for a low profile installation and holds the screen securely in a single position. Constructed from heavy duty metal, the 25.7 inch by 8.3 inch wall plate supports dual stud installation at 16 inch and 24 inch on center spacing.

by Mount-It! · San Diego, California

🚚 Ships from California

The Mount-It! Heavy Duty Full Motion TV Wall Mount (MI-14010) is engineered for large-format displays that need the full range of motion — 27.7 inches of extension, 120° total swivel (60° left and right), and +5°/-15° tool-free tilt — with a 264 lb weight capacity that handles the heaviest consumer and commercial TVs on the market. Safety latches lock the TV securely to the wall plate, and ±5° screen leveling ensures precise alignment after installation. Compatible with flat and curved TVs from 60 to 120 inches, with VESA compatibility from 200x200 to 900x600 mm across 11 standard patterns.

by Mount-It! · San Diego, California

🚚 Ships from California

Mount-It! MI-13050XL fixed TV wall mount fits most 37 inch to 70 inch flat panel TVs with VESA mounting patterns from 200x200 mm to 600x400 mm and a maximum weight capacity of 77 lbs. This fixed mount sits 1.1 inches from the wall for a low profile installation and holds the screen securely in a single position. Constructed from heavy duty metal. Compatible installation surfaces include tile over studs, tile over masonry, plywood backing wall, solid wood wall, brick veneer, brick, concrete block, concrete, metal studs, and wood studs.

by Mount-It! · San Diego, California

🚚 Ships from California

The Mount-It! Heavy-Duty XL Advanced Tilt TV Wall Mount (MI-413) is engineered for oversized displays that need more than a basic tilt mount. A friction hinge mechanism extends the mount from 2.1 to 6.8 inches from the wall, giving you the rear clearance to route and manage cables without removing the TV. The sliding wall plate and quick-release pull cords make alignment and removal fast and precise.

by Mount-It! · San Diego, California

🚚 Ships from California

The Mount-It! MI-14003 is a UL-certified, heavy-duty full motion TV wall mount engineered for 37–80" flat-panel TVs weighing up to 110 lbs. Its articulating arm extends up to 24.2" from the wall and retracts to just 2.4" for a near-flush profile, giving you complete freedom to tilt, swivel, and level your display for the perfect viewing angle in any room.

by Mount-It! · San Diego, California

🚚 Ships from California

Mount-It! MI-392 full motion TV wall mount fits most 40 inch to 90 inch flat panel TVs with VESA mounting patterns from 100x100 mm to 800x400 mm and a maximum weight capacity of 176 lbs. The mount tilts up to 5 degrees upward and 10 degrees downward, swivels 90 degrees left and right, and extends up to 36 inches from the wall. The mount retracts to 3.5 inches from the wall for a low profile installation. Constructed from heavy duty metal, the 26.5 inch by 10 inch wall plate supports dual stud installation at 16 inch and 24 inch on center spacing.

by Mount-It! · San Diego, California

🚚 Ships from California

Mount-It! MI-346L full motion TV wall mount fits most 24 inch to 65 inch flat panel TVs with VESA mounting patterns from 75x75 mm to 600x400 mm and a maximum weight capacity of 110 lbs. The mount tilts up to 15 degrees downward, swivels 90 degrees left and right, and extends up to 17.3 inches from the wall. The mount retracts to 2.9 inches from the wall for a low profile installation. Constructed from heavy duty metal, the 18 inch by 5.75 inch wall plate supports dual stud installation at 16 inch on center spacing.

by Mount-It! · San Diego, California

🚚 Ships from California

Mount-It! MI-303B tilting TV wall mount fits most 37 inch to 80 inch flat panel TVs with VESA mounting patterns from 100x100 mm to 600x400 mm and a maximum weight capacity of 175 lbs. The mount tilts up to 10 degrees upward and 12 degrees downward and sits 2.45 inches from the wall for a low profile installation. Constructed from heavy duty metal, the 25.7 inch by 8.3 inch wall plate supports dual stud installation at 16 inch and 24 inch on center spacing.

by Mount-It! · San Diego, California

🚚 Ships from California

This full-motion TV wall mount uses a split wall plate mechanism with Friction Hinge motion (Extend and Swivel) to support TVs from 55" to 90" on flat walls (43" to 80" for corner installations) weighing up to 176 lbs. Key Specifications Weight limit: up to 176 lbs Compatible TV sizes: 43 in., 48 in., 49 in., 50 in., 55 in., 58 in., 60 in., 65 in., 70 in., 75 in., 77 in., 80 in., 83 in., 85 in., 86 in., 90 in.

by Mount-It! · San Diego, California

🚚 Ships from California

Mount-It! MI-383 TV wall mount fits most 37 inch to 80 inch flat panel TVs with VESA mounting patterns from 200x200 mm to 600x400 mm and a maximum weight capacity of 176 lbs. The mount tilts up to 5 degrees upward and 10 degrees downward and sits 2.1 inches from the wall for a low profile installation. Constructed from heavy duty metal, the 27.5 inch by 9.7 inch wall plate supports dual stud installation at 16 inch and 24 inch on center spacing.

by Mount-It! · San Diego, California

🚚 Ships from California

Mount-It! MI-3050 fixed TV wall mount fits most 32 inch to 55 inch flat panel TVs with VESA mounting patterns from 200x200 mm to 400x400 mm and a maximum weight capacity of 77 lbs. This fixed mount sits 1.1 inches from the wall for a low profile installation and holds the screen securely in a single position. Constructed from heavy duty metal, the 18.3 inch by 4 inch wall plate supports dual stud installation at 16 inch on center spacing.

by Mount-It! · San Diego, California

🚚 Ships from California

Mount-It! MI-385 full motion TV wall mount fits most 40 inch to 80 inch flat panel TVs with VESA mounting patterns from 100x100 mm to 600x400 mm and a maximum weight capacity of 132 lbs. The mount tilts up to 12 degrees upward and 2 degrees downward, swivels 30 degrees left and right, and extends up to 13.5 inches from the wall. The mount retracts to 2.3 inches from the wall for a low profile installation. Constructed from heavy duty metal, the 16.9 inch by 9.75 inch wall plate supports dual stud installation at 16 inch on center spacing.

by Mount-It! · San Diego, California

🚚 Ships from California

The Mount-It! MI-302 is a motorized pull-down fireplace TV wall mount engineered to solve the #1 problem with above-fireplace TV placement: neck strain. With the press of a button on the included RF remote, the mount lowers your TV to eye level and tilts it toward you — then retracts flush to the wall when not in use. Built from heavy-duty steel with a UL-certified motor, the MI-302 supports 42" to 80" flat-panel TVs weighing up to 110 lbs across a wide range of VESA patterns.

by Mount-It! · San Diego, California

🚚 Ships from California

The Mount-It! Low-Profile TV Wall Mount (MI-203XL) is a fixed, ultra-slim wall mount engineered for small to medium-sized TVs and monitors where a clean, flush appearance is the priority. With a static profile of just 0.94 inches from the wall, it delivers a picture-frame look that keeps your screen tight against the surface — ideal for bedrooms, home offices, dorm rooms, kitchens, and any space-sensitive installation. Heavy-duty steel construction supports screens up to 66 lbs, and single stud installation makes it a straightforward DIY project completable in as little as 15 minutes.

by Mount-It! · San Diego, California

🚚 Ships from California

Mount-It! MI-4223 tilting Ceiling TV mount fits most 32 inch to 55 inch flat panel TVs with VESA mounting patterns from 100x100 mm to 400x400 mm and a maximum weight capacity of 66 lbs. The mount tilts up to 75 degrees downward. Constructed from heavy duty metal, the 6 inch by 20.25 inch wall plate supports single stud installation. Compatible installation surfaces include Wood ceiling joist, Metal/steel ceiling joist, Concrete ceiling (poured slab), Drop ceiling (T-bar, requires structural anchor above), Exposed wood beam, Steel I-beam and Truss.

by Mount-It! · San Diego, California

🚚 Ships from California

Rolling tray table with a large 30"x15" tabletop Height adjustable, with adjustment lever, up to 43.3" with a long 26" base for more stability Great for use as a hospital or medical desk and for in-home use in bed or on the sofa Overview This rolling over the bed table is great for a variety of uses and environments. Use it in bed at home, as a medical or hospital bed, and it's even great for use in wheelchairs. Stay comfortable while you eat, write or surf the web from your sofa or bed.

by Mount-It! · San Diego, California

🚚 Ships from California

Take your computer workstation anywhere with our all-in-one mobile sit-stand desk MI-7979W Effortlessly alternate between sitting and standing with 13.8" height adjustment and enjoy a healthier and more active workday Spacious 28" wide desktop with device slot and separate keyboard tray provides ample space for your laptop or monitor and keyboard/mouse Bonus storage shelves on the bottom for printer and CPU Ideal compact solution for a variety of settings including medical facilities, home office, and education Overview Enjoy a complete sit-stand workstation anywhere you like!

by Mount-It! · San Diego, California

🚚 Ships from California

This overbed table offers a convenient desktop solution to use near beds, couches and recliners It can be used to perform work tasks or as breakfast tray for bedridden patients and elderly The 31.5" by 15.7" desktop can be tilted up to 90° allowing for flexible angles for working or reading Its built-in gas spring allows for smooth and easy height adjustment between 27.2" and 41.3" The sturdy steel base with hidden casters ensures mobility as well as stability and fits under lower couches and beds Overview This overbed table provides a practical and versatile desktop solution for use in…

by Mount-It! · San Diego, California

🚚 Ships from California

Mount-It! MI-855 TV stand fits most 23 inch to 43 inch flat panel TVs with VESA mounting patterns from 100x100 mm to 200x200 mm and a maximum weight capacity of 110 lbs. This stationary stand swivels 30 degrees left and right. Constructed from heavy duty metal for stable support. Suitable for retail displays, trade shows, presentations, lobbies, reception areas, hospitality, and home entertainment setups. Compatible with VESA standard flat panel TVs from major brands including Samsung, LG, Sony, TCL, Vizio, Hisense, and other TVs within the supported size, weight, and VESA range.

by Mount-It! · San Diego, California

🚚 Ships from California

The Mount-It! Pull Down Fireplace TV Mount (MI-384L) is purpose-built for above-fireplace installations where the TV needs to come down to eye level for comfortable viewing. A gas spring arm with a cushioned, insulated handle lets you pull your TV down smoothly and hold it at any height within a 25.8" adjustment range — then push it back up flush against the wall when not in use.

by Mount-It! · San Diego, California

🚚 Ships from California

Experience full back support for extended periods of sitting with this fullsize back cushion from our Ergo Collection The memory foam-filled ergonomic pillow gently conforms to your body contours, delivering maximum personal support Enjoy improved air circulation with the breathable mesh material, keeping you cool and comfortable throughout the day The durable cover is made from breathable mesh fabric and can be simply unzipped and removed for washing Two adjustable elastic straps ensure a perfect and snug fit on most chairs Overview Improve your posture and start working more…

by Mount-It! · San Diego, California

🚚 Ships from California

MI-1232 stands are compatible with most satellite speakers or bookshelf speakers Height adjustable to suit any home theater environment 10 lb weight capacity per stand Sleek, modern design is engineered to reduce vibrations Easily move your stands to find the perfect surround sound setup Overview The MI-1232 height adjustable speaker stands have a max height of 40.8" and a minimum height of 30". You can elevate and adjust your sound preference effortlessly with our simple, twistable, height adjusting knob.

by Mount-It! · San Diego, California

🚚 Ships from California

MI-7803 is a low-profile, ergonomic footrest Non-skid surface keeps your feet from slipping off Improve circulation throughout your day with the round surface bumps Three tilt settings adjust to your leg length Overview The MI-7803 is an under-desk, ergonomic footrest that will keep you working comfortably. Raise your feet and legs for better posture and less strain. Improve your circulation with the massaging, round surface bumps. Three tilt settings allow you to adjust the footrest to your leg length. Non-skid surface keeps your feet from slipping off the footrest while working.

by Mount-It! · San Diego, California

🚚 Ships from California

Mount-It! MI-14004 tilting TV wall mount fits most 43 inch to 90 inch flat panel TVs with VESA mounting patterns from 200x200 mm to 800x400 mm. The mount tilts up to 12 degrees upward and 12 degrees downward and sits 2.1 inches from the wall for a low profile installation. Constructed from heavy duty metal, the 33.9 inch by 3.9 inch wall plate supports triple stud installation at 16 inch on center spacing.

by Mount-It! · San Diego, California

🚚 Ships from California