Mount-It! Motorized Fireplace TV Mount With Recessed Base

Mount-It! MI-384 full motion pull-down, fireplace TV wall mount fits most 42 inch to 65 inch flat panel TVs with VESA mounting patterns from 100x100 mm to 600x500 mm and a maximum weight capacity of 55 lbs. The mount tilts up to 10 degrees upward and 5 degrees downward, swivels 30 degrees left and right, and extends up to 22.4 inches from the wall. The mount retracts to 5.7 inches from the wall for a low profile installation. Constructed from heavy duty metal, the 26.8 inch by 13.5 inch wall plate supports dual stud installation at 16 inch and 24 inch on center spacing.

by Mount-It! · San Diego, California

🚚 Ships from California

Mount-It! MI-386 motorized full motion pull-down, fireplace TV wall mount fits most 40 inch to 70 inch flat panel TVs with VESA mounting patterns from 200x100 mm to 600x400 mm and a maximum weight capacity of 77 lbs. The mount tilts up to 3 degrees downward, swivels 25 degrees left and right, and extends up to 19.1 inches from the wall. The mount retracts to 6 inches from the wall for a low profile installation. Constructed from heavy duty metal, the 18.1 inch by 11.7 inch wall plate supports dual stud installation at 16 inch on center spacing.

by Mount-It! · San Diego, California

🚚 Ships from California

The Mount-It! MI-382 Advanced Tilt TV Wall Mount is engineered for large-screen installations where precise tilt adjustment and a low-profile finish matter most. Its scissor pop-out arm extends from 3.1 to 5.3 inches, giving you the clearance needed for above-fireplace mounting while allowing full cable access — then retracts flush for a clean, low-profile look. Built from heavy-duty metal and rated to 154 lbs, the MI-382 handles virtually every flat-panel TV from 40 to 80 inches with confidence.

by Mount-It! · San Diego, California

🚚 Ships from California

Mount-It! MI-381 full motion TV wall mount fits most 32 inch to 70 inch flat panel TVs with VESA mounting patterns from 200x200 mm to 600x400 mm and a maximum weight capacity of 175 lbs. The mount tilts up to 5 degrees upward and 15 degrees downward, swivels 90 degrees left and right, and extends up to 26.8 inches from the wall. The mount retracts to 0 inches from the wall for a low profile installation. Constructed from heavy duty metal, the 16.5 inch by 24.25 inch wall plate supports dual stud installation at 16 inch on center spacing. Compatible installation surfaces include wood studs.

by Mount-It! · San Diego, California

🚚 Ships from California

The Mount-It! MI-14003 is a UL-certified, heavy-duty full motion TV wall mount engineered for 37–80" flat-panel TVs weighing up to 110 lbs. Its articulating arm extends up to 24.2" from the wall and retracts to just 2.4" for a near-flush profile, giving you complete freedom to tilt, swivel, and level your display for the perfect viewing angle in any room.

by Mount-It! · San Diego, California

🚚 Ships from California

Mount-It! MI-442 full motion TV wall mount fits most 24 inch to 55 inch flat panel TVs with VESA mounting patterns from 100x100 mm to 400x400 mm and a maximum weight capacity of 44 lbs. The mount tilts up to 15 degrees upward and 15 degrees downward, swivels 90 degrees left and right, and extends up to 22.8 inches from the wall. The mount retracts to 2.2 inches from the wall for a low profile installation. Constructed from heavy duty metal, the 2.7 inch by 7.5 inch wall plate supports single stud installation.

by Mount-It! · San Diego, California

🚚 Ships from California

Mount-It! MI-4151 full motion TV wall mount fits most 19 inch to 42 inch flat panel TVs with VESA mounting patterns from 75x75 mm to 200x200 mm and a maximum weight capacity of 44 lbs. The mount tilts up to 15 degrees upward and 15 degrees downward, swivels 90 degrees left and right, rotates 360 degrees, and extends up to 18 inches from the wall. The mount retracts to 3.5 inches from the wall for a low profile installation. Constructed from heavy duty metal, the 3.1 inch by 5.5 inch wall plate supports single stud installation.

by Mount-It! · San Diego, California

🚚 Ships from California

The Mount-It! MI-307 is an ultra-slim tilting TV wall mount engineered for large-screen displays — fitting TVs from 43" to 90" and supporting up to 165 lbs — while keeping your screen just 1.9" from the wall for a clean, near-flush look. A built-in +4°/−10° tilt range lets you dial in the perfect viewing angle and cut glare, while post-installation micro-leveling adjustment (0.3") ensures your TV is perfectly straight every time.

by Mount-It! · San Diego, California

🚚 Ships from California

Mount-It! MI-2041 full motion TV wall mount fits most 19 inch to 32 inch flat panel TVs with VESA mounting patterns from 75x75 mm to 100x100 mm and a maximum weight capacity of 40 lbs. The mount tilts up to 15 degrees upward and 15 degrees downward, swivels 90 degrees left and right, rotates 360 degrees, and extends up to 15 inches from the wall. The mount retracts to 1.75 inches from the wall for a low profile installation. Constructed from heavy duty metal, the 2 inch by 5.75 inch wall plate supports single stud installation.

by Mount-It! · San Diego, California

🚚 Ships from California

The Mount-It! MI-14002 is a UL Certified full motion TV wall mount engineered for 32–55 inch flat panel TVs, delivering a full range of articulation — tilt, swivel, and extension — so you can dial in the perfect viewing angle from anywhere in the room. A friction-hinge mechanism holds your position securely without tools, and the mount retracts to just 1.93 inches from the wall for a clean, low-profile look when not in use.

by Mount-It! · San Diego, California

🚚 Ships from California

Mount-It! MI-392 full motion TV wall mount fits most 40 inch to 90 inch flat panel TVs with VESA mounting patterns from 100x100 mm to 800x400 mm and a maximum weight capacity of 176 lbs. The mount tilts up to 5 degrees upward and 10 degrees downward, swivels 90 degrees left and right, and extends up to 36 inches from the wall. The mount retracts to 3.5 inches from the wall for a low profile installation. Constructed from heavy duty metal, the 26.5 inch by 10 inch wall plate supports dual stud installation at 16 inch and 24 inch on center spacing.

by Mount-It! · San Diego, California

🚚 Ships from California

Mount-It! MI-4224 tilting Ceiling TV mount fits most 32 inch to 70 inch flat panel TVs with VESA mounting patterns from 200x100 mm to 600x400 mm and a maximum weight capacity of 77 lbs. The mount tilts up to 75 degrees downward. Constructed from heavy duty metal, the 6 inch by 20.3 inch wall plate supports single stud installation. Compatible installation surfaces include Wood ceiling joist, Metal/steel ceiling joist, Concrete ceiling (poured slab), Drop ceiling (T-bar, requires structural anchor above), Exposed wood beam, Steel I-beam and Truss.

by Mount-It! · San Diego, California

🚚 Ships from California

This overbed table offers a convenient desktop solution to use near beds, couches and recliners It can be used to perform work tasks or as breakfast tray for bedridden patients and elderly The 31.5" by 15.7" desktop can be tilted up to 90° allowing for flexible angles for working or reading Its built-in gas spring allows for smooth and easy height adjustment between 27.2" and 41.3" The sturdy steel base with hidden casters ensures mobility as well as stability and fits under lower couches and beds Overview This overbed table provides a practical and versatile desktop solution for use in…

by Mount-It! · San Diego, California

🚚 Ships from California

Mount-It! MI-509XL full motion Ceiling TV mount fits most 32 inch to 77 inch flat panel TVs with VESA mounting patterns from 200x200 mm to 600x400 mm and a maximum weight capacity of 110 lbs. The mount tilts up to 18 degrees downward, and swivels 180 degrees left and right. Constructed from heavy duty metal, the 2.25 inch by 8 inch wall plate supports single stud installation. Compatible installation surfaces include Wood ceiling joist, Metal/steel ceiling joist, Concrete ceiling (poured slab), Drop ceiling (T-bar, requires structural anchor above), Exposed wood beam, Steel I-beam and Truss.

by Mount-It! · San Diego, California

🚚 Ships from California

The Mount-It! Full Motion TV Wall Mount with Extra Long Extension (MI-402) brings 37.2 inches of reach and a full ±90° swivel to smaller and mid-size TVs — making it the go-to full-motion mount for bedrooms, dorm rooms, home offices, and corner installations where standard arm length falls short. A friction hinge mechanism delivers smooth, controlled movement across the full range of motion, with +5°/-15° tilt and ±3° screen leveling for precise positioning. Corner installation is fully supported, and the compact 3.9" x 13.2" wall plate installs on a single stud in as little as 30 minutes.

by Mount-It! · San Diego, California

🚚 Ships from California

17 gallon (65 liter) stackable storage crate Reduce clutter and securely organize tools, cleaning supplies, clothes and much more Collapses down to 3" for easier portability and storage Heavy-duty plastic with interlocking lid and an opening for an optional padlock Overview This collapsible bin can carry up to 65 liters, making it large enough for personal or commercial use, but can fold down to a 3" height for easy storage and portability.

by Mount-It! · San Diego, California

🚚 Ships from California

Mount-It! MI-855 TV stand fits most 23 inch to 43 inch flat panel TVs with VESA mounting patterns from 100x100 mm to 200x200 mm and a maximum weight capacity of 110 lbs. This stationary stand swivels 30 degrees left and right. Constructed from heavy duty metal for stable support. Suitable for retail displays, trade shows, presentations, lobbies, reception areas, hospitality, and home entertainment setups. Compatible with VESA standard flat panel TVs from major brands including Samsung, LG, Sony, TCL, Vizio, Hisense, and other TVs within the supported size, weight, and VESA range.

by Mount-It! · San Diego, California

🚚 Ships from California

Take your computer workstation anywhere with our all-in-one mobile sit-stand desk MI-7979W Effortlessly alternate between sitting and standing with 13.8" height adjustment and enjoy a healthier and more active workday Spacious 28" wide desktop with device slot and separate keyboard tray provides ample space for your laptop or monitor and keyboard/mouse Bonus storage shelves on the bottom for printer and CPU Ideal compact solution for a variety of settings including medical facilities, home office, and education Overview Enjoy a complete sit-stand workstation anywhere you like!

by Mount-It! · San Diego, California

🚚 Ships from California

Ideal for commercial projector installations in classrooms, meeting rooms, hospitality venues and other spaces Heavy duty construction supports projectors up to 77 lbs 360° rotating joint and swivel feature ensure optimal viewing angles The tilting design allows for a tilt of +/-20° for perfect positioning Adjustable pole customizes the projector's height between 29.3" to 45.1" The detachable head section simplifies installation and adjustable support arms fit most projectors Overview Our professional grade ceiling projector mount simplifies the installation of projectors in…

by Mount-It! · San Diego, California

🚚 Ships from California

MI-2772 is compatible with 75mm x 75mm, 100mm x 100mm VESA patterns and can hold up to 22lbs Boost productivity with double the screen space Slim profile monitor arm is ideal for compact spaces where conventional monitor arms with folding arms cannot fit Easy installation with removable VESA head and includes both grommet and c-clamp base Overview Raise your monitors to eye level for a healthier way to work. Double your productivity and improve your upgrade your workspace with double the screen space. This mount features a rail design to align two monitors side by side in a compact set up.

by Mount-It! · San Diego, California

🚚 Ships from California

Lockable, tamper-proof design provides security in public areas such as retail, trade shows and more Universal enclosure designed to fit Samsung Galaxy Tab A and Tab S tablets The slim frame can be mounted flush to the wall or to any VESA compatible stand Durable construction from high-strength…

by Mount-It! · San Diego, California

🚚 Ships from California

Under desk CPU mount provides a safe and space-saving solution for most popular gaming PC cases Space-saving solution with adjustable height and width to suit a variety of CPU sizes and shapes Locking feature holds the CPU securely in place The sliding track and 360° swivel feature allow for easy access to ports and cables Overview This Mount-It! gaming CPU mount with sliding track is the ultimate accessory for gamers seeking a safe and space-saving solution for their gaming PC cases.

by Mount-It! · San Diego, California

🚚 Ships from California

MI-1232 stands are compatible with most satellite speakers or bookshelf speakers Height adjustable to suit any home theater environment 10 lb weight capacity per stand Sleek, modern design is engineered to reduce vibrations Easily move your stands to find the perfect surround sound setup Overview The MI-1232 height adjustable speaker stands have a max height of 40.8" and a minimum height of 30". You can elevate and adjust your sound preference effortlessly with our simple, twistable, height adjusting knob.

by Mount-It! · San Diego, California

🚚 Ships from California

The Mount-It! Pull Down Fireplace TV Mount (MI-384L) is purpose-built for above-fireplace installations where the TV needs to come down to eye level for comfortable viewing. A gas spring arm with a cushioned, insulated handle lets you pull your TV down smoothly and hold it at any height within a 25.8" adjustment range — then push it back up flush against the wall when not in use.

by Mount-It! · San Diego, California

🚚 Ships from California