Thomas Flinn & Co. Clifton No. 3 Bench Plane

Made in Sheffield, England Clifton Model No. C4 2" (50 mm) wide cutter blade Cutting Iron is made from cryogenically treated 01 steel, hardened and tempered to 60-62 Rockwell C the precision ground and are 0.120" thick (3mm) Knob & handle are carefully shaped, sanded & sealed from Walnut Screws & adjusting wheel made of polished brass Product Description Specs Clifton No. 4 Smoothing Bench Plane - Model C4. It has a cutter width of 2" (50 mm) and is intended for smoothing.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Sheffield, England Clifton Model No. C5 2" (50 mm) wide cutter blade Cutting Iron is made from cryogenically treated 01 steel, hardened and tempered to 60-62 Rockwell C the precision ground and are 0.120" thick (3mm) Knob & handle are carefully shaped, sanded & sealed from Walnut Screws & adjusting wheel made of polished brass Product Description Specs Clifton No. 5 Bench Plane - Model C5. It has a cutter width of 2" (50 mm) and is for use as a Jack plane.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Clifton No. 3 Smooth Plane The Clifton Bench Planes are highly attractive and functional tools that aim to give you an accurate and smooth finish. Ideal for…

by Highland Woodworking · Atlanta, GA

🚚 Free shipping on orders over $99 · Ships from Georgia

Made in Sheffield, England Clifton Model No. C770 1-1/8" (29 mm) wide cutter blade The cutting edge is ground to 25 ° primary & 30 ° secondary - Blade made from high quality oil hardened tool steel, 59-61 rockwell “C” hardness Great for planing up to a right angle such as a stopped rabbet, precision trimming of mortise & tenon joints, etc. Knurled turn knobs for smooth adjustments Product Description Specs This Clifton 770 Bull Nose Plane fulfills the need for a straight-forward bull nose plane enabling the user to plane close to an abutting section of wood & avoiding tear-out.

Made in Sheffield, England Clifton Model No. 420 3/4" (19 mm) wide cutter blade The cutting edge is ground to 25 ° primary & 30 ° secondary - Blade made from high quality oil hardened tool steel, 59-61 rockwell “C” hardness Knurled turn knobs for smooth adjustments Product Description Specs The Clifton 420 Shoulder Plane fills the need for a light accurate shoulder plane. The body is machined from quality grey iron casting and is precision ground on the sole and the sides. The lever arm in made of unbreakable malleable iron and fits snugly into the body of the plant.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Sheffield, England Clifton Model No. CBPA 1-5/8" (41 mm) wide cutter blade Blade angle is 25 ° , angle on the bed is 12 ° making the total angle 37 ° Cutter blade made from high quality oil hardened tool steel, 59-61 rockwell “C” hardness Made from a high quality bronze casting Weight of plane is approx. 1 kilo Knurled turn knobs for smooth adjustments Product Description Specs Clifton Low Angle Adjustable Mouth Block Plane - Model CBPA.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

No. 3 style smoothing plane The cutting iron blade is made of high carbon steel, hardened & tempered 1-3/4" wide cutter blade 9-3/4" (245 mm) overall length Handle & knob are made of hardwood Product Description Specs The body of this smoothing plane is ribbed to ensure strength & rigidity. The machined faces of the frog bed sit firmly onto similar machined faces on the body of the plane & then fastened in position by two screws. This positive positioning helps prevent chattering.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Clifton O1 Cryo Plane Iron Clifton Bench Plane cutting irons are made from 01 steel that is now cryogenically treated. This cutting iron has a hardness of 60…

by Highland Woodworking · Atlanta, GA

🚚 Free shipping on orders over $99 · Ships from Georgia

Model No. 12-904 2" wide cutter blade Tempered carbon steel cutter blade C ast iron grey base with precision-ground sides for accuracy when planing Fully machined & polished double-iron cutter & lever - Quick-release cam lock makes iron removal easy F rog seat is machined for precise mouth adjustment Cutter depth is adjustable, resting at 25° angle Solid brass cutter-adjustment knob Durable epoxy-coated finish provides long-lasting protection Product Description Specs The Stanley Bailey No. 4 smoothing bench plane is great for general shaving of wood surfaces.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Sheffield, England Clifton Model No. 410 11/16" (18 mm) wide cutter blade The cutting edge is ground to 25 ° primary & 30 ° secondary - Blade made from high quality oil hardened tool steel, 59-61 rockwell “C” hardness Knurled turn knobs for smooth adjustments Product Description Specs The Clifton 410 Shoulder Rebate Plane fills the need for a narrow light and accurate shoulder plane. The body is machined from quality grey iron casting and precision ground on the sole and the sides. The lever arm is made of unbreakable malleable iron and fits snugly into the body of the plane.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

2" wide cutter blade Cutting iron is made of high carbon steel, hardened & tempered F rog seat is machined for precise mouth adjustment Cutter depth is adjustable, resting at 25° angle Solid brass cutter-adjustment knob Handle & knob are hardwood Product Description Specs This No. 4 Smoothing Bench Plane is great for general shaving of wood surfaces. A very common & popular hand plane, it is great for general smoothing & finish work. It also can be used for trimming parts & other miscellaneous jobs .

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

2-1/2" wide cutter blade Cutting iron is made of high carbon steel, hardened & tempered Handle & knob are made of hardwood Product Description Specs The No. 6 Smoothing Fore Plane. Machined faces of the frog bed sit firmly onto similar machined faces on the body of the plane & then fastened in position by two screws. This positive positioning helps prevent chattering. The cut iron is made of high carbon steel, hardened & tempered under precise control for accuracy & uniformity. Handle & knob are hardwood. This is the #6 traditional fore plane.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made of cast iron 3-1/2" reach 8" length Black enamel finish Product Description Specs A cast iron holdfast with an 11/16″ diameter post & a reach of 3-1/2″. Use a mallet & a vertical blow to lock material tight against the bench surface. Sideways blows will “unlock”. Designed for holding work in place on benchtops & made of cast iron with a black enamel finish.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

11" overall length Angled chisel on one end for prying Nail puller on the other end Product Description Specs A basic small length mini c rowbar. Pull, pry & straighten, with an angled chisel on one end for prying & lifting, & the other end of crow bar is slotted for pulling nails. A "seconds" crow bar prybar.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Model 582905 | 7006600 Reese Towpower Solid Cast Universal Latch Coupler Lock Product Description Specs Reese Towpower Solid Cast Universal Latch Coupler Lock. Adjustable brass trailer coupler lock provides security to prevent trailer theft. It features attractive, durable solid brass with a flat key design. Fits most trailer couplers. Product Title Model # Reese Towpower Solid Cast Universal Latch Coupler Lock DIB-582905 |…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Adjustable Frame Accepts 10" & 12" Hacksaw Blades 16" overall length Two Cutting Positions & 3-1/2" Cutting Depth Product Description Specs An Adjustable Frame Hacksaw is ideal for cutting glass, ceramic tile, hardened steel or bone, & variety of other materials at home or on a job site. It has two cutting positions & 3-1/2" cutting depth. Accepts 10" & 12" hacksaw blades.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Model No. L30BBK Includes 4 woodburning tips: All-Purpose Tip, Script Point, Shading Point, & Dot Point Includes 4 branding tips: Square Point, Circle Point, Diamond Point, & Triangle Point Pen develops point temperatures up to 1050 ° F that burns wood faster & darker - Especially good for harder woods like Cherry & Walnut Includes small metal tool stand & box for tool storage 30 watts Product Description Specs Pen develops point temperatures up to 1050°F that burns wood faster & darker.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Special design 100% spun soft cotton Adult male fit Available in S, M, L, XL, & XXL Product Description Specs The special & unique "Squareheads Rule at Hardwick's" T-shirt. The shirt is made of heavyweight 100% spun soft cotton & the shirt color is in an attractive rich red color with ash gray lettering print. Double needle sleeves & hem for durability. A great shirt & a great conversation starter!

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Germany Model No. 63903193018 For cutting various soft materials, e.g. felt, leather, polystrene, & many others Sold as one blade in pack Product Description Specs Fein Concave Segment Blade - 63903193018 . For cutting various soft materials, e.g. felt, leather, polystrene, & many others. Made in Germany.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

When heat needs to surround - bending, soldering pipe, shrinking tubing Use with any Milwaukee Heat Gun Product Description Specs The 49-80-0292 Hook Nozzle can be used with all Milwaukee Heat Guns for bending, soldering pipe, shrinking tubing or any application where the heat needs to surround the work piece. Includes nozzle only .

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Model LS087 Forged & tempered 5/8" width of square end 3/4" width of leaf end 9-1/2" overall length Product Description Specs These Marshalltown QLT Ornamental Tools are forged & tempered. This small tool has a trowel end & square end that are used to detail foam shapes & unusual wall surfaces. Ideal for working in small areas . Product Overall Length Square End Width Leaf End Width Model # Marshalltown Small Tool Leaf & 5/8" Square 9-1/2" 5/8" 3/4"…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Alfa Tools Crimped Wire Wheel 2" diameter wheel Coarse 1/4" shank - 1" length 0.012" Wire Diameter 6000 RPM max Product Description Specs Alfa Tools 2" Coarse Wire Wheel - 1/4" Shank. 0 .012" Wire Diameter. 6000 RPM max. All-steel construction. Applications include deburring, blending, removal of rust, scale, dirt, & finish preparation prior to painting or plating. Made by Alfa Tools. Made in Spain.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Germany Model No. 63806129067 (1) sanding pad with no holes (1) felt polishing pad (5) pieces of 40 grit sanding sheets - no holes (5 ) pieces of 80 grit sanding sheets - no holes ( 5 ) pieces of 120 grit sanding sheets - no holes (5) pieces of 220 grit sanding sheets - no holes (5) pieces of 320 grit sanding sheets - no holes (5) pieces of 400 grit sanding sheets - no holes (5) pieces of 600 grit sanding sheets - no holes (5) pieces of 800 grit sanding sheets - no holes Product Description Specs Fein Stone Sanding & Polishing Set - 63806129067 . Made in Germany.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Model No. 807 Great for reaching hard to get at screws 1/4" slotted & 3/8" slotted Blades are made of machined, ground & hardened tool steel Drive rotation can be reversed instantly 4" overall length Product Description Specs This Ratcheting Offset Screwdriver with slotted blades is ideal for use where screws are concealed or obstructed, leverage is required, or where turning space is limited. 1/4" slotted & 3/8" slotted.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho