USED Lufkin Telescoping Gage - 2-1/8" to 3-1/2" Range

Used - good condition Lufkin Telescoping Gage - 1/2" to 3/4" Range Product Description Specs Lufkin Telescoping Gage - 1/2" to 3/4" Range. Product Lufkin Telescoping Gage - 1/2" to 3/4"…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Used - good condition PEC Telescoping Gage ~ 1-1/4" to 2-1/8" Range Product Description Specs PEC Telescoping Gage ~ 1-1/4" to 2-1/8" Range. Product PEC Telescoping Gage ~ 1-1/4" to 2-1/8"…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Starrett Model 229D - USED - Good condition engraved on side Range: 2-1/8" to 3-1/2" Two telescoping contacts P recision Ground Radius on each gage provides two-point contact for maximum accuracy C onstant spring tension gives uniform contact pressure B oth plungers are easily locked at any desired setting Product Description Specs The Starrett Telescoping Gage is used for determining the true size of holes, slots, and recesses. The ends of both contacts are hardened and ground to a radius to allow proper clearance on the smallest hole the gage will enter.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Starrett Model - USED - Good condition - Initials of previous owner engraved on side Range: 1-1/8" to 2-1/8" Two telescoping contacts P recision Ground Radius on each gage provides two-point contact for maximum accuracy C onstant spring tension gives uniform contact pressure B oth plungers are easily locked at any desired setting Product Description Specs The Starrett Telescoping Gage is used for determining the true size of holes, slots, and recesses. The ends of both contacts are hardened and ground to a radius to allow proper clearance on the smallest hole the gage will enter.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Starrett Model 579C - USED - good condition Range: 3/4" to 1-1/4" (19-32mm) Two telescoping contacts P recision Ground Radius on each gage provides two-point contact for maximum accuracy C onstant spring tension gives uniform contact pressure B oth plungers are easily locked at any desired setting Product Description Specs The Starrett 579 Telescoping Gage is used for determining the true size of holes, slots, and recesses. The ends of both contacts are hardened and ground to a radius to allow proper clearance on the smallest hole the gage will enter.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Starrett Model 579E Range: 2-1/8" to 3-1/2" (54-89mm) Two telescoping contacts P recision Ground Radius on each gage provides two-point contact for maximum accuracy C onstant spring tension gives uniform contact pressure B oth plungers are easily locked at any desired setting Product Description Specs The Starrett 579 Telescoping Gage is used for determining the true size of holes, slots, and recesses. The ends of both contacts are hardened and ground to a radius to allow proper clearance on the smallest hole the gage will enter.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Starrett Model 579F Range: 3-1/2" to 6" (89-150mm) Two telescoping contacts P recision Ground Radius on each gage provides two-point contact for maximum accuracy C onstant spring tension gives uniform contact pressure B oth plungers are easily locked at any desired setting Product Description Specs The Starrett 579 Telescoping Gage is used for determining the true size of holes, slots, and recesses. The ends of both contacts are hardened and ground to a radius to allow proper clearance on the smallest hole the gage will enter.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Starrett Model 579C Range: 3/4" to 1-1/4" (19-32mm) Two telescoping contacts P recision Ground Radius on each gage provides two-point contact for maximum accuracy C onstant spring tension gives uniform contact pressure B oth plungers are easily locked at any desired setting Product Description Specs The Starrett 579 Telescoping Gage is used for determining the true size of holes, slots, and recesses. The ends of both contacts are hardened and ground to a radius to allow proper clearance on the smallest hole the gage will enter.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Starrett Model 579D Range: 1-1/4" to 2-1/8" (32-54mm) Two telescoping contacts P recision Ground Radius on each gage provides two-point contact for maximum accuracy C onstant spring tension gives uniform contact pressure B oth plungers are easily locked at any desired setting Product Description Specs The Starrett 579 Telescoping Gage is used for determining the true size of holes, slots, and recesses. The ends of both contacts are hardened and ground to a radius to allow proper clearance on the smallest hole the gage will enter.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Starrett Model 579B Range: 1/2" to 3/4" (13-19mm) Two telescoping contacts P recision Ground Radius on each gage provides two-point contact for maximum accuracy C onstant spring tension gives uniform contact pressure B oth plungers are easily locked at any desired setting Product Description Specs The Starrett 579 Telescoping Gage is used for determining the true size of holes, slots, and recesses. The ends of both contacts are hardened and ground to a radius to allow proper clearance on the smallest hole the gage will enter.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Starrett Model 579A Range: 5/16" to 1/2" (8-13mm) Two telescoping contacts P recision Ground Radius on each gage provides two-point contact for maximum accuracy C onstant spring tension gives uniform contact pressure B oth plungers are easily locked at any desired setting Product Description Specs The Starrett 579 Telescoping Gage is used for determining the true size of holes, slots, and recesses. The ends of both contacts are hardened and ground to a radius to allow proper clearance on the smallest hole the gage will enter.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Starrett Model S579HZ Includes No. A, B, C, D, F, E gages Two telescoping contacts P recision Ground Radius on each gage provides two-point contact for maximum accuracy C onstant spring tension gives uniform contact pressure B oth plungers are easily locked at any desired setting Product Description Specs The Starrett 579 Telescoping Gage Set is used for determining the true size of holes, slots, and recesses. The ends of both contacts are hardened and ground to a radius to allow proper clearance on the smallest hole the gage will enter.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA D esigned to remove broken studs, bolts, socket screws & fittings Un-used old stock Large EX-10 size Aggressive left hand spiral design for extra gripping power Product Description Specs Irwin Spiral Flute Screw Extractor - L arge EX-10 size . Remove broken bolts & screws with these spiral shaft extractors. Irwin Hanson EX-10 Spiral Flute Screw Extractor - Made in USA. Made in USA.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Un-opened package - New Stock Norton - Model 87944 Made in USA 3 sharpening stones included in kit: Medium grit, Fine grit, Very Fine grit 6" x 2" x 5/16" size sharpening stones Includes sharpening base Product Description Specs Norton Angle-Rite Sharpener - 3 Stone Sharpening Kit with base. Made in USA. Product Norton Angle-Rite Sharpener - 3 Stone Sharpening…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

20 oz head weight Drop Forged Steel Head Head made in Japan - Handle made with American Hickory Mill Face - Rip Hammer 15-1/2" overall length Hickory hardwood handle Product Description Specs A Japanese 20 oz Mill Face Rip Hammer with Hickory Handle . Mill waffle face. 15-1/2" overall length. Head made in Japan. Handle made from American Hickory. Mill waffle face.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Model No. 15-106A Excellent for cutting intricate patterns & irregular shapes High-grade carbon hardened & tempered blade provides clean, controlled cutting action 6-1/2" cutting depth - 360 º blade pivot at 45º increments Nickel-plated steel frame & cushion handle Cuts wood, plastic, light metal & wallboard Product Description Specs This FatMax Coping Saw has a high-grade carbon hardened & tempered blade & an ergonomically-designed cushion grip handle.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in England Henry Taylor Diamic Model No. F4 1" wide blade Forged, hardened & tempered blade Brass ferrule Lacquered Beech handle Product Description Specs A 1" Offset Paring Gouge made by Henry Taylor Tools in England . Offset bent blade. Henry Taylor - Diamic ~ Model No. F4. Made in UK . From the Manufacturer - About Henry Taylor: Established in 1834, Henry Taylor Tools have manufactured a wide range of quality hand-crafted tools through 3 centuries, from our forge based in Sheffield (UK).

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Thexton Part No. 356 Un-opened package Product Description Specs Thexton Cooling System Flush Tool. Thexton Manufacturing Company, Minneapolis MINN. Product Thexton Cooling System Flush…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Vintage-style Hardware Traditional & classic Made of genuine glass Attractive "Black" colored glass Non-lacquered brass finish on brass base (will patina naturally over time) Includes a 8-32 thread machine truss-head screw which allows for invisible rear mounting Product Description Specs This turn-of-century reproduction glass knob has an exquisite & charming star-shaped design fitting for period cabinets & furniture. The glass is carefully set into a handsome brass base with a threaded shank in the back.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

8" length size 7/8" width Zinc-plated steel material Countersunk holes Product Description Specs These flat mending plate irons are designed for furniture, cabinets, shelving support, etc. Allows for quick & easy repair of items in the workshop, home, & other applications. Made of steel material with a zinc plated finish. Countersunk holes. 8" long size. Screws not included.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Adjustable Frame Accepts 10" & 12" Hacksaw Blades 16" overall length Two Cutting Positions & 3-1/2" Cutting Depth Product Description Specs An Adjustable Frame Hacksaw is ideal for cutting glass, ceramic tile, hardened steel or bone, & variety of other materials at home or on a job site. It has two cutting positions & 3-1/2" cutting depth. Accepts 10" & 12" hacksaw blades.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

4 Mil, Powder Free Nitrile Made from materials that comply with FDA regulations Ambidextrous design fits right or left hand Acceptable for food handling Sold as 100 gloves in a box Product Description Specs These powder-free Nitrile gloves are good disposable gloves for a variety of uses including home improvement, shop use, food preparation, painting, cleaning, postal work, security, law enforcement, pet care, hobby work, arts & crafts, etc . Beaded cuff style. *Note Not intended for medical use.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Alfa Tools Crimped Wire Wheel 2" diameter wheel Coarse 1/4" shank - 1" length 0.012" Wire Diameter 6000 RPM max Product Description Specs Alfa Tools 2" Coarse Wire Wheel - 1/4" Shank. 0 .012" Wire Diameter. 6000 RPM max. All-steel construction. Applications include deburring, blending, removal of rust, scale, dirt, & finish preparation prior to painting or plating. Made by Alfa Tools. Made in Spain.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Palm Wood blank 6" x 3/4" x 3/4" size Wooden blank for pen wood turning Sold as single piece Product Description Specs Palm Wood Blank . 6" length x 3/4" height x 3/4" width size. Pen turning blank. Exotic Wood Blank. Wood grain & color shade may vary from wood blank to wood blank. No exchanges based on wood grain & color.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho