Do It Best - National Hardware 3-1/2" Bright Brass Door Hinges - 3 Pack

Bright Brass on steel material Square corners 3-1/2" x 3-1/2" size hinge 50 lb. safe working load one hinge Removable pin Includes flat head screws Sold as one hinge in pack Product Description Specs 3-1/2 " Bright Brass Door Hinge with square corners & a removable pin. Bright Brass finish on steel material. Countersunk holes. Includes flat head screws. 3-1/2" x 3-1/2" door hinge size. Five knuckle, full mortise design. National Hardware Model No. N830-212. Product Overall Size of Hinge Safe Working Load Model # 3-1/2" Bright Brass Door Hinge 3-1/2" x 3-1/2" size hinges 50 lb.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Bright Brass on steel material 5/8" radius corners 3-1/2" x 3-1/2" size hinge 50 lb. safe working load one hinge Removable pin Includes flat head screws Sold as one hinge in pack Product Description Specs 3-1/2 " Bright Brass Door Hinge with 5/8" radius corners & a removable pin. Bright Brass finish on steel material. Countersunk holes. Includes flat head screws. 3-1/2" x 3-1/2" door hinge size. Five knuckle, full mortise design. National Hardware Model No. N830-206.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Satin brass finish on steel material Square corners 3" x 3" size hinge 50 lb. safe working load one hinge Removable pin Includes flat head screws Sold as one hinge in pack Product Description Specs 3 " Satin Brass Door Hinge with square corners & a removable pin. Satin Brass finish on steel material. Countersunk holes. Includes flat head screws. 3" x 3" door hinge size. Five knuckle, full mortise design. National Hardware Model No. N830-232. Product Overall Size of Hinge Safe Working Load Model # 3" Satin Brass Door Hinge 3" x 3" size hinges 50 lb.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Bright Brass on steel material 5/8" radius corners 3-1/2" x 3-1/2" size hinge Button tip Removable pin Includes flat head screws Sold as two hinges in pack Product Description Specs A pair of 3-1/2 " Bright Brass Door Hinges with 5/8" radius corners & a removable pin. Bright Brass finish on steel material. Countersunk holes. Includes flat head screws. 3-1/2" x 3-1/2" door hinge size. Five knuckle, full mortise design. Ultra Hardware No. 35770.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made of steel material with a bright brass finish 3" size of hinge 50 lb. safe working load (two hinges) Surface mount Non-removable pin Includes flat head phillips screws Sold as two hinges in pack Product Description Specs These non mortise hinges are designed for use on bi-fold doors. Non-removable tight, non-rising pin. Surface mount, mortising is not required . Sold as 2 hinges in pack. National Hardware Model No. N244-780 . Product Hinge Size Safe Working Load Model # 3" Brass-Plated Surface Mount Hinges - 2 Pack 3" 50 lb.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made of steel material with an bright brass finish 3-1/2" size of hinge 60 lb. safe working load (two hinges) Surface mount Non-removable pin Includes flat head phillips screws Sold as two hinges in pack Product Description Specs These non mortise hinges are designed for use on bi-fold doors. Non-removable tight, non-rising pin. Surface mount, mortising is not required . Sold as 2 hinges in pack. National Hardware Model No. N244-806 . Product Hinge Size Safe Working Load Model # 3-1/2" Brass-Plated Surface Mount Hinges - 2 Pack 3-1/2" 60 lb.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Satin Brass on steel material Square corners 3-1/2" x 3-1/2" size hinge Button tip Removable pin Includes flat head screws Sold as two hinges in pack Product Description Specs A pair of 3-1/2 " Satin Brass Door Hinges with square corners & a removable pin. Satin Brass finish on steel material. Countersunk holes. Includes flat head screws. 3-1/2" x 3-1/2" door hinge size. Five knuckle, full mortise design. Ultra Hardware No. 35212.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Stainless steel material, 300 series 3-1/2" size hinge Five knuckle, full mortise design Heavy-gauge material for added strength Non-rising pin Maximum Door Weight: Two hinges = 110 lbs. | Three hinges = 165 lbs. Includes six flat head phillips screws Sold as single hinge in pack Product Description Specs 3-1/2" Stainless Door Hinge. Made of stainless steel material, 300 series for maximum corrosion resistance & heavy-gauge material for added strength. Nob on hinge for finished appearance with square corners. Non-rising pin. 5 knuckle, full mortise design. Screw holes are countersunk.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Stainless steel material, 300 series 3-1/2" size hinge - 5/8" Radius Non-rising pin Maximum Door Weight: Two hinges = 110 lbs. | Three hinges = 165 lbs. Includes six flat head phillips screws Sold as single hinge in pack Product Description Specs 3-1/2" Stainless Door Hinge - 5/8" Radius. Made of stainless steel material, 300 series for maximum corrosion resistance. Nob on hinge for finished appearance with square corners. Non-rising pin. Screw holes are countersunk. Sold as single hinge in pack. National Hardware Model No. N225-961.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Black Finish Loose-Pin Door Hinge 3" x 3" size hinge Removable pin Includes flat head screws Sold as a single hinge Product Description Specs 3" x 3" square corner door hinge. Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. 5 knuckle full mortise design. Square corners. Screw holes are countersunk. Removable pin for easier installation or removal of doors. Includes flat head screws. National Hardware Model No. N830-424.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Stainless steel material, 300 series 3-1/2" size hinge - 1/4" Radius Non-rising pin Maximum Door Weight: Two hinges = 110 lbs. | Three hinges = 165 lbs. Includes six flat head phillips screws Sold as single hinge in pack Product Description Specs 3-1/2" Stainless Door Hinge - 1/4" Radius. Made of stainless steel material, 300 series for maximum corrosion resistance. Nob on hinge for finished appearance with square corners. Non-rising pin. Screw holes are countersunk. Sold as single hinge in pack. National Hardware Model No. N225-946.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Brass plated on cold-rolled steel material Overall hinge size: 3" high x 2-1/16" wide Removable pin Includes twelve flat head phillips screws Sold as two hinges in pack Product Description Specs 3" Brass-Plated Loose-Pin Narrow Hinges - 2 Pack . 3" high x 2-1/16" wide . Made of cold-rolled steel with brass plating. Removable pin hinges. Sold as a pair of hinges. National Hardware Model No. N142-067.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

11" overall length Angled chisel on one end for prying Nail puller on the other end Product Description Specs A basic small length mini c rowbar. Pull, pry & straighten, with an angled chisel on one end for prying & lifting, & the other end of crow bar is slotted for pulling nails. A "seconds" crow bar prybar.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

8" length size 7/8" width Zinc-plated steel material Countersunk holes Product Description Specs These flat mending plate irons are designed for furniture, cabinets, shelving support, etc. Allows for quick & easy repair of items in the workshop, home, & other applications. Made of steel material with a zinc plated finish. Countersunk holes. 8" long size. Screws not included.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Model No. 16651 Vermont American #8 Hinge Bit Self-Centering Drill & Driver Accurately centers pilot holes & drives screws without re-chucking Product Description Specs Vermont American #8 Hinge Bit. Self-Centering Drill & Driver. Accurately centers pilot holes & drives screws without re-chucking. Made in USA.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Model No. 714 Made of durable engineering plastic 3" ruler for measuring screw lengths Product Description Specs This handy screw thread gage quickly identifies thread pitch, tap size & drill bit size for machine & wood screws, self tapping screws, bolts & common rivets & cotter pins up to 5/16" (8 mm). Made in USA.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Number "5" house number Made of solid brass material - Lacquered finish 4" size 1/4" thickness Includes two flat head phillips screws Product Description Specs Number Five Solid Brass House Number in a 4" Size. M ade of solid brass material - 1/4" thickness . Lacquered brass finish . Includes two flat head phillips screws. #5 House Number. Hy-Ko Model No. BR-90/5.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Model No. 520202 - Unused old stock - small amount of rust on shank 1/4" Core Box 2" Overall Length 1/4" shank Product Description Specs Irwin Carbide 1/4" Core Box Router Bit - Made in USA. Carbide - High Grade Steel construction Router Bit. 2" overall length. 1/4" shank. Irwin Blue Diamond Model No. 520202. Made in USA. Product Model # Irwin Carbide 1/4" Core Box Router Bit - Made in USA…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Model No. 807 Great for reaching hard to get at screws 1/4" slotted & 3/8" slotted Blades are made of machined, ground & hardened tool steel Drive rotation can be reversed instantly 4" overall length Product Description Specs This Ratcheting Offset Screwdriver with slotted blades is ideal for use where screws are concealed or obstructed, leverage is required, or where turning space is limited. 1/4" slotted & 3/8" slotted.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA · C.S. Osborne ~ Since 1826 Model No. 265 Rawhide palm with riveted joints Iron thimble with heavy duty vinyl attached to rawhide Excellent for leather & canvas Available in both left hand & right hand Product Description Specs A quality USA-made sail palm made by C.S. Osborne. The palm is excellent for sewing leather, canvas, & similar materials. The iron thimble is bound to the rawhide palm. Available in both right & left hand. Made in the USA. From the Manufacturer: Since 1826, the Osborne family had dedicated itself to providing the very finest tools.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Un-opened package - New Stock Norton - Model 87944 Made in USA 3 sharpening stones included in kit: Medium grit, Fine grit, Very Fine grit 6" x 2" x 5/16" size sharpening stones Includes sharpening base Product Description Specs Norton Angle-Rite Sharpener - 3 Stone Sharpening Kit with base. Made in USA. Product Norton Angle-Rite Sharpener - 3 Stone Sharpening…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Model No. 5736 Un-opened box Dremel Drill Bit Sharpener - 5736 Product Description Specs Dremel Drill Bit Sharpener - 5736 . Product Model # Dremel Drill Bit Sharpener - 5736 5736 For California Residents: WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Germany Model No. 63806129067 (1) sanding pad with no holes (1) felt polishing pad (5) pieces of 40 grit sanding sheets - no holes (5 ) pieces of 80 grit sanding sheets - no holes ( 5 ) pieces of 120 grit sanding sheets - no holes (5) pieces of 220 grit sanding sheets - no holes (5) pieces of 320 grit sanding sheets - no holes (5) pieces of 400 grit sanding sheets - no holes (5) pieces of 600 grit sanding sheets - no holes (5) pieces of 800 grit sanding sheets - no holes Product Description Specs Fein Stone Sanding & Polishing Set - 63806129067 . Made in Germany.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Number "6" house number Made of die-cast aluminum material - Black hammered look 3-1/2" size Includes two small nails Product Description Specs Number Six Black Hammered House Number in a 3-1/2" Size. M ade of die-cast aluminum material with a black hammered style . Mounting nails included. #6 House Number. Hy-Ko Model No. DC-3/6.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho