Infinity Cutting Tools Infinity Tools 4" Splice

Fits between two sections of 2-1/2" hose to create longer hose runs.

by Infinity Tools · Oldsmar, FL

🚚 Ships from Florida

Serves as an inlet for 2-1/2" hose into 4" hose run.

by Infinity Tools · Oldsmar, FL

🚚 Ships from Florida

Tapered for better air flow, this fitting adapts 5" hose to 4" hose.

by Infinity Tools · Oldsmar, FL

🚚 Ships from Florida

4" x 2-1/4" Taper Adapter allows you to use shop vacuum hoses and fittings with a 4" hose.

by Infinity Tools · Oldsmar, FL

🚚 Ships from Florida

Serves as a 45° inlet for 4" hose into 4" hose run.

by Infinity Tools · Oldsmar, FL

🚚 Ships from Florida

This 4" Quick Coupler features a tapered end with a 3-9/16" O.D. to fit inside most 4" ports and fittings. 4" hose threads securely onto the opposite end…

by Infinity Tools · Oldsmar, FL

🚚 Ships from Florida

This 4" x 2-1/2" Quick Coupler adapts a 2-1/2" hose to a 4" quick-disconnect, tapered fitting. NOTE: The hose connection on this fitting uses right-hand…

by Infinity Tools · Oldsmar, FL

🚚 Ships from Florida

2-1/2in Splice Connector These splices are used to connect full sections of hose for longer runs or to utilize short sections. 2-1/2-Inch diameter. Hose…

by Highland Woodworking · Atlanta, GA

🚚 Free shipping on orders over $99 · Ships from Georgia

T-fittings are used to insert a hose into a straight hose line. This fitting is used to connect a 2-1/2" hose inlet into a 2-1/2" hose run.

by Infinity Tools · Oldsmar, FL

🚚 Ships from Florida

Splice Connector - 4" Used for joining together two sections of 4" dust hose. You will need two hose clamps(not included) to secure the hose to the connector.

by Highland Woodworking · Atlanta, GA

🚚 Free shipping on orders over $99 · Ships from Georgia

4" Blast Gate with tapered fittings on both sides to accept a hose (hose clamps required). Also can be used with our 115-371 and 115-374 QD hose fittings.

by Infinity Tools · Oldsmar, FL

🚚 Ships from Florida

4" 90° Elbow takes less room and prevents kinks when routing hose around a corner.

by Infinity Tools · Oldsmar, FL

🚚 Ships from Florida

Featuring a variety of diameters with smooth transitions for optimum air flow, our Universal Adapter can be cut to fit (we recommend a hand saw or band saw).…

by Infinity Tools · Oldsmar, FL

🚚 Ships from Florida

Pre-Machined Router Bit Setup Block - For Lock Miter Jr. Bit 55-502 Don't fumble with router bit setup, some cutters take more time to get setup correctly.…

by Infinity Tools · Oldsmar, FL

🚚 Ships from Florida

Famag #2 Morse Taper for 10mm Hex Shank Forstner Bits This premium quality Famag #2 morse taper is designed for mounting a Forstner bit on your lathe, for…

by Infinity Tools · Oldsmar, FL

🚚 Ships from Florida

Our Top Quality Ogee Router Bits Leave A Smooth Finish With No Extra Sanding Required! Don't buy inferior quality Ogee Router Bits (or any router bit for that…

by Infinity Tools · Oldsmar, FL

🚚 Ships from Florida

.a-center { width: 12%; } Replacement Knives For Interior / Exterior Door Heads Designed to fit on Infinity Tools Insert-Pro Interior / Exterior Door Making…

by Infinity Tools · Oldsmar, FL

🚚 Ships from Florida

Maximium Safety At The Router Table Or Table Saw! BOW Products featherboards are revolutionary and here's why; their unique design and innovative materials…

by Infinity Tools · Oldsmar, FL

🚚 Ships from Florida

Threaded on both sides for a 4" hose, this dust gate is used in the middle of a hose run, usually located near a tool. Threading the hose onto the fitting…

by Infinity Tools · Oldsmar, FL

🚚 Ships from Florida

Better Dust Collection at the Drill Press! The drill press station has always been one of the messiest corners of any workshop because traditional dust…

by Infinity Tools · Oldsmar, FL

🚚 Ships from Florida

Premium Factory Matched Rail & Stile Sets For 3/4" to 1-1/4" Thick Stock! These factory matched Rail and Stile shaper cutters are perfect for making…

by Infinity Tools · Oldsmar, FL

🚚 Ships from Florida

M.POWER launched the Original FASTTRACK Mk1 15 years ago. Along the way, they got great feedback from customers and perfected the improvements now featured in…

by Infinity Tools · Oldsmar, FL

🚚 Ships from Florida

#html-body [data-pb-style=UF9QUSB]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left…

by Infinity Tools · Oldsmar, FL

🚚 Ships from Florida

Professional Results Every Time! Flush-trimming is one of the most common operations for a router in the workshop. Our solid-carbide, spiral router bits are…

by Infinity Tools · Oldsmar, FL

🚚 Ships from Florida