Pferd Plastic Bushing - 1" to 5/8"

Made in Germany Pferd Model No. 61028 D esigned for steels, edge grinding, surface grinding, deburring, weld finishing, etc. 5" diameter of wheel 1/4" thickness 7/8" arbor Max RPM: 12200 RPM Product Description Specs A high quality 5" Grinding Wheel made by Pferd in Germany. This grinding wheel is d esigned for steels, edge grinding, surface grinding, weld finishing, etc . Long service life for reduced wheel changes, suited for use in severe high pressure grinding. 5 " diameter of wheel. 7/8" Arbor. 1/4" thickness of blade. Depressed center type blade. Made in Germany.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Germany Pferd Model No. 61026 D esigned for steels, edge grinding, surface grinding, deburring, weld finishing, etc. 4-1/2" diameter of wheel 1/4" thickness 7/8" arbor Max RPM: 13300 RPM Product Description Specs A high quality 4-1/2" Grinding Wheel made by Pferd in Germany. This grinding wheel is d esigned for steels, edge grinding, surface grinding, weld finishing, etc . Long service life for reduced wheel changes, suited for use in severe high pressure grinding. 4-1/2 " diameter of wheel. 7/8" Arbor. 1/4" thickness of blade. Depressed center type blade. Made in Germany.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Germany Pferd Model No. 61030 D esigned for steels, edge grinding, beveling, weld finishing, etc 6" diameter of wheel 1/4" thickness 7/8" arbor hole Max RPM: 10200 RPM Product Description Specs A high quality 6" Grinding Wheel made by Pferd in Germany. This grinding wheel is d esigned for steels, edge grinding, beveling, weld finishing, etc . High stock removal rate & long service life. 6 " diameter of wheel. 7/8" arbor hole. 1/4" thickness of blade. Depressed center type blade. Made in Germany.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Germany Pferd Model No. 61790 Silicone Carbide D esigned for carbide & non-ferrous metals - Ideal for sharpening edges on cutting tools with carbide tips 6" diameter of wheel - 120 Grit 1" thickness of wheel 1" arbor hole diameter - Includes bushings with 1/2", 5/8", 3/4" sizes Max RPM: 4140 RPM Product Description Specs A high quality 6" Silicone Carbide Bench Grinding Wheel made by Pferd in Germany. D esigned for carbide & non-ferrous metals - Ideal for sharpening edges on cutting tools with carbide tips .

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Germany Pferd Model No. 61040 D esigned for steels, edge grinding, surface grinding, deburring, weld finishing, etc. 5" diameter of wheel 1/4" thickness 5/8"-11 threaded hub Max RPM: 12200 RPM Product Description Specs A high quality 5" Grinding Wheel made by Pferd in Germany. This grinding wheel is d esigned for steels, edge grinding, surface grinding, weld finishing, etc . Long service life for reduced wheel changes, suited for use in severe high pressure grinding. 5 " diameter of wheel. 5/8-11 thread. 1/4" thickness of blade. Depressed center type blade. Made in Germany.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Steel brush. 10 in [250 mm] dia. x 2-3/8 in [60 mm], with very high tensile strength wire for extremely efficient use, mounting hole dia. 2 in [51 mm]. 33…

by Tool Nut · Yorktown Heights, NY

🚚 Ships from New York

Steel brush. 10 in [250 mm] dia. x 2-3/8 in [60 mm], with very high tensile strength wire for extremely efficient use, mounting hole dia. 2 in [51 mm]. 33…

by Tool Nut · Yorktown Heights, NY

🚚 Ships from New York

Made in Germany Pferd Model No. 61788 Silicone Carbide D esigned for carbide & non-ferrous metals - Ideal for sharpening edges on cutting tools with carbide tips 6" diameter of wheel - 60 Grit 1" thickness of wheel 1" arbor hole diameter - Includes bushings with 1/2", 5/8", 3/4" sizes Max RPM: 4140 RPM Product Description Specs A high quality 6" Silicone Carbide Bench Grinding Wheel made by Pferd in Germany. D esigned for carbide & non-ferrous metals - Ideal for sharpening edges on cutting tools with carbide tips .

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Germany Pferd Model No. 61022 D esigned for steels, edge grinding, surface grinding, deburring, weld finishing, etc. 4" diameter of wheel 1/4" thickness 3/8" arbor Max RPM: 13300 RPM Product Description Specs A high quality 4" Grinding Wheel made by Pferd in Germany. This grinding wheel is d esigned for steels, edge grinding, surface grinding, weld finishing, etc . Long service life for reduced wheel changes, suited for use in severe high pressure grinding. 4 " diameter of wheel. 7/8" Arbor. 1/4" thickness of blade. Depressed center type blade. Made in Germany.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Germany Pferd Model No. 63105 D esigned for steel, cutting of sheet metal, sections, cutting solid material 5" diameter of wheel 3/32" thickness 7/8" Arbor Max RPM: 12200 RPM Product Description Specs A high quality 5" Cut-Off Wheel made by Pferd in Germany. This cut off wheel is d esigned for steel, cutting of sheet metal, sections, cutting solid material. The cut off disc has fast cutting action. 5 " diameter of wheel. 7/8" Arbor. 3/32" thickness of blade. Depressed center type blade. Made in Germany.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Germany Pferd Model No. 61038 D esigned for steels, edge grinding, surface grinding, deburring, weld finishing, etc. 4-1/2" diameter of wheel 1/4" thickness 5/8"-11 threaded hub Max RPM: 13300 RPM Product Description Specs A high quality 4-1/2" Grinding Wheel made by Pferd in Germany. This grinding wheel is d esigned for steels, edge grinding, surface grinding, weld finishing, etc . Long service life for reduced wheel changes, suited for use in severe high pressure grinding. 4-1/2 " diameter of wheel. 5/8-11 thread. 1/4" thickness of blade. Depressed center type blade.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Germany Pferd Model No. 69405 D esigned for steel, cutting of sheet metal, sections, cutting solid material 4" diameter of wheel 1/16" thickness 1/4" Arbor Max RPM: 19000 RPM Product Description Specs A high quality 4" Cut-Off Wheel made by Pferd in Germany. This cut off wheel is d esigned for steel, cutting of sheet metal, sections, cutting solid material. The cut off disc has fast cutting action. 4 " diameter of wheel. 1/4" Arbor. 1/16" thickness of blade. Made in Germany.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Arrow Model No. 354 1/4" (6mm) size P35 Plier Type 1/4" Staples 5040 Pack Product Description Specs A rrow’s P35 Plier Type 1/4" staples are good for stapling thicker paper, cardboard, etc. The P35 staple is specially designed to fit the Arrow P35 plier stapler & is great for use on bags, tags, papers, & labels . 1/4" (6 mm) leg length size. 1/2" crown width. Item No. 354. 5040 PK. Made in USA.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

FastCap Model HINGE JIG Repair Plate for Euro-style hinges - Good for helping cabinet hinges that have failed or torn out of the hinge cup Includes two adhesive backers & five #2 Phillips head 1/2" length screws Product Description Specs The Fast Cap Hinge Repair Kit is a help for fixing European style cabinet hinges that have failed or torn out of the hinge cup. To use, place the damaged hinge back into the hinge cup and hammer it flat if it's bent. Then, peel off the adhesive backing and position the Hinge Repair Plate over the back side of the damaged hinge.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Locking Round Nose Pliers 7" Size (175 mm) Drop-forged steel jaw 1-3/8" Jaw Capacity Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use C lassic trigger release designed to provide maximum locking force Product Description Specs Do It 7" Locking Round Nose Pliers. Ideal for tightening, clamping, twisting & turning. Turn screw to adjust pressure & fit work. Stays adjusted for repetitive use. D rop-forged steel jaw . Classic trigger release designed to provide maximum locking force. Locking nose plier clamp. Made by Do It Best.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

3M Model 62093H1-DC Designed for use for mold remediation, sanding/scraping lead based paint in accordance with local government regulations or guidance Product Description Specs This 3M Demolition & Renovation Respirator is for u se for particulates during sawing, sanding, & grinding. Balanced design for more comfort. Can be used for sanding and scraping of lead-based paint in certain projects. NIOSH (National Institute for Occupational Safety and Health) approved: P100. Replacement filter cartridge available . NIOSH approved: Organic vapor/acid gas/P-100.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan Small-sized chisel set good for fine detail woodwork 3/16" small gouge 1/4" large gouge 3/16" bent V parting tool 1/2" straight skew chisel 7/16" straight chisel 7/16" bent straight chisel Product Description Specs A good & basic Japanese-made 6-piece set of palm handle chisels. They are great for fine detail carving woodwork. Six of the most basic & useful chisel styles are included in this set, & the half-round palm-style handles are made of hardwood. Made in Japan.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Model No. 91102B Stubby multi-bit screwdriver with b it storage in handle B its included: #1, #2, #3 phillips, 1/4", 3/16" slotted, 15 Torx Rare earth magnet firmly holds working bit in shank & applies strong magnetic force to screws Aircraft alloy shank with hex bolster that receives a 3/8” wrench for extra torque Durable & solid ergonomic handle - no rattling parts or bits Product Description Specs The multi-bit Picquic "Stubby" is s mall enough to fit into crowded tool boxes, glove boxes, or even a pocket or purse. Great for hard-to-reach-spots.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Channellock Model 432 10" size V-Jaws for more points of contact on round stock and tubing 2" Jaw Capacity Permalock fastener eliminates nut & bolt failure with increased joint strength 90° laser-hardened teeth for superior grip & longevity Forged high carbon U.S. steel for maximum strength and durability is specially coated for ultimate rust prevention Undercut tongue & groove won't slip Vinyl blue comfort grips Product Description Specs This Channellock 10" V-Jaw Tongue & Groove Plier has a unique v jaw design that creates more points of contact on round…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in France Model No. 2979D-180+8 Made of high performance alloy steel with hardened jaws Phosphate finish, anti-corrosion treated Serration in jaws Gripping capacity of 3 mm to 13 mm PVC coated handles Product Description Specs These professional Bahco Nut Gripping Pliers have conical jaws with teeth facing inwards for extra gripping power. Designed for gripping nuts in confined spaces & positive grip on rounded bolts & nuts. G ripping capacity of 3 mm to 13 mm. M ade of high performance alloy steel with hardened jaws. Made in France.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Klein Tools Model No. 602-3 Hex bolster reinforces shank for hard use & allows wrench assisted turning 7/32" (5.6 mm) tip size 3" Shank Precision-machined tip for exact fit Special heat-treated, chrome plated shaft for corrosion resistance Internal flanges inside handle provide solid, twist-resistant blade anchor Cushion-Grip handle for greater torque & comfort Product Description Specs Klein Tools 7/32" (5.6 mm) Slot Heavy-Duty Keystone Screwdriver with 3" shank is designed for the most demanding uses.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Channellock Model 442 12" size V-Jaws for more points of contact on round stock and tubing 2.25" Jaw Capacity Permalock fastener eliminates nut & bolt failure with increased joint strength 90° laser-hardened teeth for superior grip & longevity Forged high carbon U.S. steel for maximum strength and durability is specially coated for ultimate rust prevention Undercut tongue & groove won't slip Vinyl blue comfort grips Product Description Specs This Channellock 12" V-Jaw Tongue & Groove Plier has a unique v jaw design that creates more points of contact on round…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan Model PA-200 - Mini bolt cutter 8" (200 mm) overall length Compound action plier Cutting capacity: 9/64" (3.5 mm) mild steel & 1/16" (2.0 mm) Heat treated drop forged alloy steel blades Product Description Specs These Japanese "Hit" 45° Offset Mini Bolt Cutters are compound action, end cutting pliers . The c utting capacity is 9/64" (3.5 mm) mild steel & 1/16" (2.0 mm). The j aws are made of drop forged high grade alloy tool steel with heat treated, blades. Maximum hardness of material to be cut: Brinell 370 / Rockwell C-40 . 45 Degree Offset Cutters. Made in Japan.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Channellock Model 804 4" size wrench Measurement scales are laser engraved (in. on front, mm. on reverse) & are handy for sizing nuts, pipe & tube diameters Precise 4-thread knurl improves adjustment accuracy Rugged Chrome Vanadium steel construction Chrome finish for ultimate rust prevention Product Description Specs This Channellock Wide Adjustable Wrench non-protruding jaws for greater access in tight spaces. The combination of a smart & comfortable tapered handle design, precise 4-thread knurl & minimal head width improves performance in everyday use.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho