Bells of Steel Black Mighty Grip Olympic Weight Plates

The Mighty Grip Olympic weight plates feature a beautiful, ergonomic design with an ultra-durable black powder coat for superior toughness and resistance to chipping. The precision grip handles make loading plates onto the bar and re-racking plates a breeze, and they're large enough for even huge hands. The comfort grip also allows the plates themselves to be used for exercises like steering wheels and farmers' carries. These plates are excellent quality iron plates made in a factory with over 40 years of casting experience.

by Bells of Steel

Weight is weight, right? But what if I told you your sloppy, 45lb plates you got for your 16th birthday from the local big box store were lying to you? The process of casting molten hot iron into molds can be fickle. Machined iron plates are cast in a specialty casting factory with over 40 years of experience, then finished on a lathe that shaves off excessive weight from the back of the plate, followed by polishing and machining edges for an even smoother, more aesthetic plate. The machined plates have a guaranteed tolerance of +/- 1% for 45, 35, and 25 and +/- 3% for 15, 10, 5, and 2.5.

by Bells of Steel

So you think you shouldn’t lift heavier than you can hold? Pfffft . Get a GRIP. Sure, we’re all for improving your grip s trength and * ahem * getting your hands dirty, but let’s be real: your grip shouldn’t limit you from growing the LARGEST muscles in your body. The Figure 8 design provides an ultra-fast and easy setup, with durable quality made to last. Studies showed that using straps leads to greater perceived grip security and power — and there’s nothing we weightlifters more than a placebo effect. I’ll take my questionable supps shaken, not stirred, thanks.

by Bells of Steel

The B.o.S. Olympic Weightlifting Barbell 2.0 is dollar-for-dollar the best weightlifting barbell you can buy. Olympic weightlifting isn't just a sport, it's an art. This requires a bar to match your skill and strength - the B.o.S. Olympic Weightlifting Bar is that masterpiece. In fact, it won Garage Gym Reviews' Best Value Barbell for Weightlifting in 2023! Its 28mm shaft, needle bearings, and hard chrome finish deliver a smooth spin, a lively whip, and a secure grip. And while not IWF approved, you can still use it to practice for the big stage.

by Bells of Steel

Set a strong foundation for strength with Technique Bumper Plates. These weight plates are the same size as their heavier big brothers, so your barbell height stays consistent whether you're warming up or learning the snatch (good luck). Your form stays flawless, and you stay injury-free—unless you trip over your own feet, but we can't help with that. Technique plates are perfect for beginners who are learning the ropes—or the bars. No more trying to guestimate your starting position with an empty bar or tiny 5lb plates.

by Bells of Steel

Bells of Steel Loadable Dumbbells feature an aesthetic, rust-resistant finish. The 28mm handle gives you the feel you're used to when using Olympic bars and the brass bushings allow for a smooth rotation. Full dumbbell sets have their place, but they can be tough to fit into a home gym. Even with our Residential Dumbbell Rack or Commercial Dumbbell Rack , you'll be using up the most valuable resource in your gym - floor space. Au contraire, two Loadable Dumbbells can easily be stowed away in the corner without disturbing the natural flow of your gym.

by Bells of Steel

Get the bells that started it all. The B.o.S. premium powder-coated kettlebells give you everything that you're looking for in a non pro-grade kettlebell. They are perfect for any box, gym, or garage. The black powder coat offers rust resistance and a strong grip, while color-coded handles make it easy to identify the weights during fast-paced workouts. Gravity-cast in a single mold, these bells are built to outlast the competitors who attach the handles separately. Oh, and let's not forget to mention the weight accuracy within 300 grams and the lifetime warranty! *chef's…

by Bells of Steel

Raise the bar on your strength training with the last pull-up bar you'll ever need. Choose from a standard grip, neutral grip, or globe grip to keep things spicy. Target your back, biceps, forearms, and core, or just hang around to boost your grip strength and decompress your spine after heavy squats. The Globe Grip Pull Up Bar has an innovative design and rust-resistant black powder coat. With a 500lb weight capacity and sturdy steel construction, this bad boy was built to last. Choose the size that corresponds with your power rack.

by Bells of Steel

Whether you own a lavish home gym or an expansive training facility, fixed barbells are the pinnacle of convenience. These bad boys come in 10 preset weight increments, so you can quickly grab the perfect weight for your workout without doing any plate math to save yourself time and mental energy. They feature two shaft styles: an iconic straight shaft and a joint-friendly curved design. Both styles boast a light knurling that's perfect for those classic barbell exercises.

by Bells of Steel

Your strength training potential is in the palm of your hand. So you think you shouldn’t lift heavier than you can hold? Pfffft. Get a GRIP. Sure, we’re all for improving your grip strength and *ahem* getting your hands dirty, but let’s be real: your grip shouldn’t limit you from growing the LARGEST muscles in your body. Studies showed that using straps leads to greater perceived grip security and power — and there’s nothing we weightlifters more than a placebo effect. I’ll take my questionable supps shaken, not stirred, thanks. IMPORTANT: One size fits all.

by Bells of Steel

Train like an athlete with the Mighty Grip Medicine Balls! Multiple weight sizes match a variety of fitness levels, crafted with a texturized hard outer shell and filled with crumb rubber for superior grip and durability. Use these in your WDJ (workout du jour), for core work, or for muscle targeting. Build your power, coordination, and conditioning — and have a ball while doing it. IMPORTANT: The Mighty Grip Medicine Balls are not warrantied for slamming against the floor or on abrasive surfaces. For slams, use Slam Balls instead.

by Bells of Steel

These commercial-grade dumbbells are hex -ceptionally priced. Our hex dumbbells are made of 50% virgin and 50% recycled rubber — the perfect blend of environmentally-friendly and durable materials to reduce the noise and impact they make against your home gym flooring . Their chrome-plated handles are resistant to corrosion and rust and are ergonomically shaped for a comfortable grip. Plus, they feature fully-welded heads to maximize longevity. Prefer a consistently straight handle to hold? Straight Handle Dumbbells are also available.

by Bells of Steel

Made of recycled rubber powder, this ultra-smooth rubber roll is perfect for covering your whole home gym or commercial gym. With a home gym you get the joy of adding flooring around awkwardly shaped objects like furnaces, vents, and load-bearing walls. No reason to panic, though! A sharp utility knife and some careful trimming will save the day. Its easy-to-clean rubber surface simply needs a quick once-over with a mop, and you're good to go. And while mopping is a great warm-up, maybe wait until after you squat so you don't turn your PR into an ER.

by Bells of Steel

Building your booty has never been this easy! Well, the set-up, that is. The heavy lifting is still up to you. This hip thrust machine will make your reps count. Its angled footplate allows for a deep stretch in the bottom of the exercise, without needing gymnast-level ankle flexibility. And with the pivoting pad, your back is supported from rock bottom to full extension. The 31.75” x 18.75” footplate of this hip thrust machine is spacious enough to accommodate big feet and wider stances.

by Bells of Steel

With the Kettlebell Rack, you can display your kettlebells with the tender love and appreciation they deserve. Each rack boasts a 500lb capacity for a beefy 1,000lb total. You'll be hard-pressed (or snatched, or cleaned, or swung) to overload this baby. While designed to hold competition kettlebells , you can also use it for rubber hex dumbells or powder-coated kettlebells . Just be careful that round gear doesn't merrily roll away! Designed with space in mind, this compact rack will restore order to the lawless wasteland that is your home gym. There's a new sheriff in town. Ye-freaking-haw!

by Bells of Steel

If you want bragging rights for having the nicest plates on the block, then these Urethane Change Plates are a must-have. Due to their urethane construction, colors have more "pop" to them. This makes lettering and numbers appear crisper, adding a noticeable level of professionalism that'll make others go "DAAAAAMNN!" Urethane is also a much harder material than rubber, so these urethane change plates are a huge step above the durability of rubber bumpers — even our competition bumper plates can't match their toughness.

by Bells of Steel

Protect your floors and your gear from big lifts with easy-to-clean recycled rubber flooring. Sold in 4' x 6' sheets for maximum floor coverage (which is great, because these heavy-duty 33lb-37.5lb mats are a pain in the glutes to move). Choose between 6mm or 8mm thick to suit your space. IMPORTANT: We are unable to ship these by UPS, so if your total order is less than 500lbs, we will be unable to ship the mats to you. Sold in single sheets.

by Bells of Steel

A barbell and a rack? Everyone has that. A Viking press landmine attachment in the corner? That's a different gym... and a different kind of shoulder day. Dust off the beater bar. Drop it into a landmine , load plates, slide the attachment over the sleeve, lock the knob. You're doing the viking press exercise in under a minute, no Strongman meet required. FOUR GRIP POSITIONS. 2 neutral, 2 regular. Narrow or wide, palms in or palms forward: press the way your shoulders actually want to move.

by Bells of Steel

Overview The Bells of Steel Lat Pulldown / Low Row Machine is a heavy duty back-training beast built for lifters who want buttery-smooth cable work without sacrificing half their house of gains. With a smooth 310 lb selectorized stack or plate loaded option, adjustable thigh pads, built-in band pegs, and high/low pulley versatility, this machine delivers wide-grip lat work, heavy low rows, arm training, and cable accessory movements — big back energy without the space demands of a full functional trainer.

by Bells of Steel

Out-train back pain and upper body mobility limitations while building lower body strength. The Belt Squat Machine is space-efficient and versatile, unlocking endless exercises for your home gym at an unbeatable price. Built like a tank, this beast boasts an impressive 700lb capacity (step aside, Hip Thrust Machine ). Plus, its innovative design features commercial-grade Zerk bearings and band pegs for improving your lockout strength. Despite its beastly strength, this strength machine is a gentle giant in your gym space.

by Bells of Steel

Your college days might be over, but it's not too late to do another keg stand train like a varsity athlete. Its 1,000-pound capacity outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks. By matching the same tubing specs as many of our American competitors, you can mix and match attachments freely without needing to stick to one brand - hello, open ecosystem!

by Bells of Steel

Sick of bracing your feet on a skinny beam mid–lat pulldown? Enter the Footplate for Cable Towers & All In One Trainers: a simple, sturdy add-on that fixes one of the most annoying cable tower quirks. No bolts, no assembly, no fuss. Just pop it out of the box, set it in place, and once your feet are planted, it stays locked down tighter than your lifting belt on PR day. Small upgrade, BIG difference in comfort and stability. This grippy checkerboard steel plate slides right onto your Bells of Steel 2.3” x 2.3” (60mm) setup: Cable Tower , All-in-One Trainer , or Power Rack .

by Bells of Steel

Elevate your cardio workouts with the Blitz Magnetic Resistance Manual Treadmill! 6 magnetic resistance levels, so you can walk, jog, sprint, or sled push. Magnetic resistance offers an ultra-smooth and highly responsive experience with minimal maintenance. The steep 17° curve will light your posterior chain on fire. When you're ready to really feel the burn, crank up the resistance and brace against the padded front handles for a sled push - turning your monotonous cardio workouts into exciting calorie bonfires.

by Bells of Steel

Upgrade your non-flat-foot Manticore (or 3"x3" with 1" holes) power racks with our flat foot support system. Grab a pair of flat feet, some reinforcement plates, and an optional cross-member to hold everything together. The flat feet come in 54" and 63" lengths, with an optional 43" flat foot crossmember to connect them for added stability. The 54" length can be paired with the 24" and 30" crossmember depths, while the 63" length can be paired with the 24", 30" and 43" depths.

by Bells of Steel