Jorgensen Pony 3" Butt Hinge Gauge

Pony Model No. 9035 Hinge profile cutter speeds & simplifies door hanging For 3-1/2" hinge size Depth scriber on gauge marks correct depth for mortise Product Description Specs Pony 3-1/2" butt hinge size gauge, Model 9035 . Speeds & cuts sharp, clean profiles in doors & jambs for accurate hinge installation. Depth scriber on gauge marks correct depth for mortise.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Pony Model No. 9040 Hinge profile cutter speeds & simplifies door hanging For 4" hinge size Depth scriber on gauge marks correct depth for mortise Product Description Specs Pony 4" butt hinge size gauge, Model 9040 . Speeds & cuts sharp, clean profiles in doors & jambs for accurate hinge installation. Depth scriber on gauge marks correct depth for mortise.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Swanson Tool - Model No. S0105 3-1/2" size H igh-grade die cast aluminum alloy Product Description Specs Swanson’s Hinge Butt Markers have pre-set depth & chisel guides to aid in making accurate mortises. The handy screw-down design means the user can actually chisel with the guide firmly held in place. This virtually eliminates miss-hit andoverstrike marks . 3-1/2" butt gauge size. Product Model # Swanson 3-1/2" Hinge Butt Marker…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Satin brass finish on steel material Square corners 3" x 3" size hinge 50 lb. safe working load one hinge Removable pin Includes flat head screws Sold as one hinge in pack Product Description Specs 3 " Satin Brass Door Hinge with square corners & a removable pin. Satin Brass finish on steel material. Countersunk holes. Includes flat head screws. 3" x 3" door hinge size. Five knuckle, full mortise design. National Hardware Model No. N830-232. Product Overall Size of Hinge Safe Working Load Model # 3" Satin Brass Door Hinge 3" x 3" size hinges 50 lb.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Porter Cable Model 59370 Door Hinge Template Kit Accommodates doors of various thicknesses: 1-3/8", 1-3/4", 2", 2-1/4", 2-1/2" Accommodates 8 hinge sizes from 2-1/2" to 6" Product Description Specs Porter Cable Door Hinge Template Kit. Used to route both door and door frame hinges for a complete door hanging solution. Accommodates doors of various thicknesses: 1-3/8", 1-3/4", 2", 2-1/4", 2-1/2". Accommodates 8 hinge sizes from 2-1/2" to 6" inclusive, in 1/2" increments. Quick-adjust ratcheting router bit guides accommodate 1/4", 5/8" radius, and square cornered hinges.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Satin brass finish on steel material Square corners 3-1/2" x 3-1/2" size hinge 50 lb. safe working load one hinge Removable pin Includes flat head screws Sold as one hinge in pack Product Description Specs 3-1/2 " Satin Brass Door Hinge with square corners & a removable pin. Satin Brass finish on steel material. Countersunk holes. Includes flat head screws. 3-1/2" x 3-1/2" door hinge size. Five knuckle, full mortise design. National Hardware Model No. N830-230. Product Overall Size of Hinge Safe Working Load Model # 3-1/2" Satin Brass Door Hinge 3-1/2" x 3-1/2" size hinges 50 lb.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Black Finish Loose-Pin Door Hinge 3" x 3" size hinge Removable pin Includes flat head screws Sold as a single hinge Product Description Specs 3" x 3" square corner door hinge. Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. 5 knuckle full mortise design. Square corners. Screw holes are countersunk. Removable pin for easier installation or removal of doors. Includes flat head screws. National Hardware Model No. N830-424.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

The Porter-Cable 59381 offers a quick, simple and accurate solution when hanging multiple doors. Provides the capacity to hang both 3 and 4 hinge doors. All…

White painted finish on steel material 5/8" radius corners 3-1/2" x 3-1/2" size hinge Button tip Removable pin Includes flat head screws Sold as three hinges in pack Product Description Specs Three 3-1/2 " White Painted Door Hinges with 5/8" radius corners & a removable pin. White color finish on steel material. Countersunk holes. Includes flat head screws. 3-1/2" x 3-1/2" door hinge size. Five knuckle, full mortise design. Ultra Hardware No. 61746.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Key Features Fast, Repeatable Mortises The integrated router bit depth guide helps you dial in hinge depth once and keep it consistent from door to door. Fits…

by Tool Nut · Yorktown Heights, NY

🚚 Ships from New York

Satin Nickel on steel material Square corners 3-1/2" x 3-1/2" size hinge 50 lb. safe working load one hinge Removable pin Includes flat head screws Sold as three hinges in pack Product Description Specs 3-1/2 " Satin Nickel Door Hinge with square corners & a removable pin. Satin Nickel finish on steel material. Countersunk holes. Includes flat head screws. 3-1/2" x 3-1/2" door hinge size. Five knuckle, full mortise design. National Hardware Model No. N830-326.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Each Infinity Tools shaper cutter delivers the performance demanded by professionals. These 3-Pc. Cabinet Door Shaper Cutter Sets include all the cutters a…

by Infinity Tools · Oldsmar, FL

🚚 Ships from Florida

Wera Model 020110 | "6004 Joker 4 Set 1" Includes four sizes: XS, S, M, & L sizes The adjustable "Joker 6004" cover all metric & imperial dimensions in the respective field of application Automatic & continuous grip of hexagon screws & bolts Lever mechanism when gripping avoids slipping & damage Fast & consistent screwdriving without removing the wrench thanks to mechanical ratchet functionality Return angle of only 30° through placement in the corner-width rectangular prisms in the open end Product Description Specs Wera "6004 Joker" Self-Setting Spanner Wrench Set.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Stanley Tools Model STY-STHT60799 10-Piece Phillips & Slotted Screwdriver Set Heat-treated, alloy-steel blades Black-Phosphate tip for secure hold on fasteners Bi-material handle Product Description Specs This Stanley Screwdriver Set features Phillips screwdrivers & flathead screwdrivers to fulfill a wide range of fastening needs. The ergonomically-designed handle is shaped & sized to provide comfort & torque at the fastener head. The heat-treated, alloy-steel blades are built to withstand long-term use.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Channellock Model 806W 6" size wrench Wide jaws offer up to 25% extra capacity, supporting larger nuts & bolts Measurement scales are laser engraved (in. on front, mm. on reverse) & are handy for sizing nuts, pipe & tube diameters Precise 4-thread knurl improves adjustment accuracy Rugged Chrome Vanadium steel construction Chrome finish for ultimate rust prevention Product Description Specs This Channellock Wide Adjustable Wrench has a greater jaw capacity to support larger nuts & bolts with thinner, non-protruding jaws for greater access in tight spaces.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Channellock Model 440 12" size Straight Jaw Tongue & Groove Pliers provide a strong, versatile grip for use in both directions 2.25" Jaw Capacity Permalock fastener eliminates nut & bolt failure with increased joint strength 90° laser-hardened teeth for superior grip & longevity Forged high carbon U.S.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Channellock Model 526 6-1/2" size Two position adjustment accommodates various sizes Serrated jaw & pipe grip design for a firm grip Wire cutting shear Reliable "Permalock" fastener eliminates nut & bolt failure with increased joint strength Forged high carbon U.S. steel for strength & durability is specially coated for ultimate rust prevention Vinyl blue comfort grips Product Description Specs These 6-1/2" Channellock Slip Joint Pliers are versatile & easy to use. They feature a serrated jaw for a firm grip and an added wire cutting shear for soft wire.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Sheffield, England Crown Tools Model No. 1764 1/2" (12 mm) cutting edge H ot forged from the finest Carbon steel & hardened ready for use L eather shock absorbing washer Steel ferrule around handle-end for use with chisel mallets Varnished Beechwood handle Product Description Specs 1 /2" (12 mm) Mortise Chisel made by Crown Tools . This chisel has a stiff thick blade for clearing out wood waste & has wide side edges that help keep the chisel square when working in the mortise. The mortice chisel has a leather disc shock absorber to help absorb mallet blows.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan 3-piece set - SAE Drop-forged chrome vanadium Wrenches included: 3/8" x 7/16", 1/2" x 9/16", 5/8" x 11/16" Designed to grip all six sides of a nut Great for brake line nuts & fittings Product Description Specs This Japanese-made 3-piece SAE flare nut wrench set offers a size range from 3/8" to 11/16" . A regular wrench can only grip onto two sides of a nut, but flare nut wrenches are designed to grip all six sides of a nut. Great for use on hex nuts made of softer materials. Great for brake line nuts & fittings.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Klein Tools Model No. 602-3 Hex bolster reinforces shank for hard use & allows wrench assisted turning 7/32" (5.6 mm) tip size 3" Shank Precision-machined tip for exact fit Special heat-treated, chrome plated shaft for corrosion resistance Internal flanges inside handle provide solid, twist-resistant blade anchor Cushion-Grip handle for greater torque & comfort Product Description Specs Klein Tools 7/32" (5.6 mm) Slot Heavy-Duty Keystone Screwdriver with 3" shank is designed for the most demanding uses.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Channellock Model GL10 9-1/2" size Special design & ergonomic offset head accommodates many shapes with greater leverage Patented "Safe-T-Stop" feature prevents finger pinch 1.25" Jaw Capacity Permalock fastener eliminates nut & bolt failure with increased joint strength Forged high carbon U.S. steel for maximum strength and durability is specially coated for ultimate rust prevention Vinyl blue comfort grips Product Description Specs This Channellock 9-1/2" Tongue & Groove "GripLock" Plier has an ergonomically designed offset head that provides more leverage.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Model No. RH200S Heavy Duty Riveter Ideal for HVAC, sheet metal, gutters, storm doors, automotive 4 different size nose pieces & nose changing wrench Works with steel rivets in sizes: 3/32", 1/8", 5/32", & 3/16" Works with aluminum rivets in sizes: 3/32", 1/8" & 5/32" Spring loaded tool Lightweight design with a comfortable vinyl grip Includes a handle lock for storage Product Description Specs T he Arrow Heavy Duty Rivet Tool RH200S is a great all-purpose rivet tool for both professional & DIY rivet applications.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Wera Model 020104 | "6004 Joker XL" Extra Large Size - XL The adjustable "Joker 6004" cover all metric & imperial dimensions in the respective field of application Range: 3/4" to 15/16" (19 mm to 24 mm) Automatic & continuous grip of hexagon screws & bolts Lever mechanism when gripping avoids slipping & damage Fast & consistent screwdriving without removing the wrench thanks to mechanical ratchet functionality Return angle of only 30° through placement in the corner-width rectangular prisms in the open end Product Description Specs Wera "6004 Joker" Self-Setting…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Model STHT60126 No. 2 phillips & 1/4" slotted screwdriver Heat-treated, alloy-steel blades Black-Phosphate tip for secure hold on fasteners 4" long blade Bi-material handle Product Description Specs This Stanley Screwdriver Set features #2 Phillips screwdriver & a 1/4" flathead screwdriver to fulfill a wide range of fastening needs. The ergonomically-designed handle is shaped & sized to provide comfort & torque at the fastener head. The heat-treated, alloy-steel blades are built to withstand long-term use. 2 PC Screwdriver set.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho