Starrett Tap Wrench - 5/16" to 3/4" Capacity Size

Made in USA Starrett Model No. 91A T empered gripping surfaces firmly hold square or round shanks 1/16" to 1/4" Capacity Size Round shanks can be gripped, but care must be used. Excessive pressure may break the moveable V-jaw P lunger operated by knurled sleeve S pring inside sleeve causes plunger to back off when pressure is removed Product Description Specs This Starrett 91 Tap Wrench is strong and well proportioned. It is nicely finished and the gripping surface is properly tempered. It will firmly hold square or round shanks.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Starrett Model 93D P roperly heat treated to withstand ordinary shop use Holds 1/16" to 3/16" Tap Size F or holding taps, drills, reamers and small tools to be turned by hand J aws conform to the tool being held and are heat treated W renches have sliding handle which is frictionally held D esigned to hold square shanks Product Description Specs The Starrett 93 T-Handle Tap Wrench is for holding taps, drills, reamers and other small tools to be turned by hand. It is properly heat treated to withstand ordinary shop use.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Starrett #91D Tap Wrench (91D) Tap Wrench, 5/16-3/4" (8-19mm) Capacity Tap Size, 16" (400mm) Body Length, 13/64-7/16" (5.2-11mm) Square Shank The Starrett 91…

by Harry J. Epstein · Kansas City, MO

🚚 Ships from Missouri

Made in USA Starrett Model 93F P roperly heat treated to withstand ordinary shop use Holds 1/4" to 1/2" Tap Size F or holding taps, drills, reamers and small tools to be turned by hand J aws conform to the tool being held and are heat treated W renches have sliding handle which is frictionally held D esigned to hold square shanks Product Description Specs The Starrett 93 T-Handle Tap Wrench is for holding taps, drills, reamers and other small tools to be turned by hand. It is properly heat treated to withstand ordinary shop use.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Starrett Model 93C P roperly heat treated to withstand ordinary shop use Holds 1/4" to 1/2" Tap Size F or holding taps, drills, reamers and small tools to be turned by hand J aws conform to the tool being held and are heat treated W renches have sliding handle which is frictionally held D esigned to hold square shanks Product Description Specs The Starrett 9C T-Handle Tap Wrench is for holding taps, drills, reamers and other small tools to be turned by hand. It is properly heat treated to withstand ordinary shop use.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Starrett Model 93B P roperly heat treated to withstand ordinary shop use Holds 7/32 (#12) to 7/16" Tap Size F or holding taps, drills, reamers and small tools to be turned by hand J aws conform to the tool being held and are heat treated W renches have sliding handle which is frictionally held D esigned to hold square shanks Product Description Specs The Starrett 93 T-Handle Tap Wrench is for holding taps, drills, reamers and other small tools to be turned by hand. It is properly heat treated to withstand ordinary shop use.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Starrett Model 93E P roperly heat treated to withstand ordinary shop use Holds 7/32" to 7/16" Tap Size F or holding taps, drills, reamers and small tools to be turned by hand J aws conform to the tool being held and are heat treated W renches have sliding handle which is frictionally held D esigned to hold square shanks Product Description Specs The Starrett 93 T-Handle Tap Wrench is for holding taps, drills, reamers and other small tools to be turned by hand. It is properly heat treated to withstand ordinary shop use.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Starrett T-Handle Tap Wrench 1/16-3/16 (93A) T-Handle Tap Wrench, 1/16-3/16" (1.6-4.7mm) Capacity Tap Size, 2" (50mm) Body Length, 1/16-5/32" (1.6-4mm) Square…

by Harry J. Epstein · Kansas City, MO

🚚 Ships from Missouri

Model No. 161R For holding taps, drills, reamers, & other small tools to be turned by hand The ratchet can be set for right, or left-hand operation, or locked to use the tool without it Self-centering hardened steel jaws and knurled chuck sleeve provide a positive grip Sliding T-handle fits into tight spaces while providing excellent leverage Product Description Specs This General Tools Ratchet Tap Wrench 161R is for No.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Model No. 164 For holding taps, drills, reamers, & other small tools to be turned by hand Self-centering hardened steel jaws and knurled chuck sleeve provide a positive grip Sliding T-handle fits into tight spaces while providing excellent leverage Product Description Specs This General Tools Tap Wrench 161R is for No. 0 to 1/4" Taps and is designed to hold and turn tap, tools that cut threads on the inner surface of a hole or pipe, or other small tools, such as hand reamers & screw extractors.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Starrett #91B Tap Wrench (91B) ///brand_for_product_detail=Starrett,brand_google=Starrett,close_out=No,companydescription=Starrett - Made in the…

by Harry J. Epstein · Kansas City, MO

🚚 Ships from Missouri

Made in USA Model No. 12050 F or Taps 1/4" to 1/2" (6 mm to 12 mm) Designed for use with taps, reamers, screw extractors & other tools with a square shank End of TR-50 wrench has 3/8" square drive to accommodate socket wrench or extension when desired Spring tension sliding handle Product Description Specs Irwin Hanson T-Handle Tap Wrench for Sizes 1/4" to 1/2" is designed for use with taps, reamers, screw extractors & other tools with a square shank . End of TR-50 wrench has 3/8" square drive to accommodate socket wrench or extension when desired.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Model No. 16651 Vermont American #8 Hinge Bit Self-Centering Drill & Driver Accurately centers pilot holes & drives screws without re-chucking Product Description Specs Vermont American #8 Hinge Bit. Self-Centering Drill & Driver. Accurately centers pilot holes & drives screws without re-chucking. Made in USA.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA · C.S. Osborne ~ Since 1826 Model No. 265 Rawhide palm with riveted joints Iron thimble with heavy duty vinyl attached to rawhide Excellent for leather & canvas Available in both left hand & right hand Product Description Specs A quality USA-made sail palm made by C.S. Osborne. The palm is excellent for sewing leather, canvas, & similar materials. The iron thimble is bound to the rawhide palm. Available in both right & left hand. Made in the USA. From the Manufacturer: Since 1826, the Osborne family had dedicated itself to providing the very finest tools.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Stock #542002 Product Description Specs Bora Clamp Edge Wide Track Auxiliary Clamps . Stock #542002. Product Model # Bora Clamp Edge Wide Track Auxiliary Clamps 542002 For California Residents: WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Model No. 15-106A Excellent for cutting intricate patterns & irregular shapes High-grade carbon hardened & tempered blade provides clean, controlled cutting action 6-1/2" cutting depth - 360 º blade pivot at 45º increments Nickel-plated steel frame & cushion handle Cuts wood, plastic, light metal & wallboard Product Description Specs This FatMax Coping Saw has a high-grade carbon hardened & tempered blade & an ergonomically-designed cushion grip handle.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan 4" overall length Easy change reversible ratchet direction Flexible head 3/8" DR Chrome Vanadium Steel Product Description Specs This 4" Stubby Ratchet 3/8" Dr with Flex Head is made of C hrome Vanadium Steel. Easy change reversible ratchet direction. 4" overall length. 3/8" drive. Flexible head. Made in Japan. Hardwick & Sons is pleased to offer quality tools from Japan for the many people who desire special & well-crafted tools.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made of cast iron 3-1/2" reach 8" length Black enamel finish Product Description Specs A cast iron holdfast with an 11/16″ diameter post & a reach of 3-1/2″. Use a mallet & a vertical blow to lock material tight against the bench surface. Sideways blows will “unlock”. Designed for holding work in place on benchtops & made of cast iron with a black enamel finish.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

3M Model 3920-BR Brown color duct tape 20 yards x 1.88 inches Multi-purpose tape with strong adhesive to create a secure bond Great for bundling, taping cords, patching, reinforcing & more Water-resistant backing T ears vertically & horizontally for versatile application Product Description Specs W hether you want your quick fix to blend in or stand out, 3M Colored Duct Tape is the boldly hued solution to match your project’s color scheme. Equipped with strong adhesive & a water-resistant backing, this tape is perfect for your temporary repairs.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Milwaukee 1/2" Socket Adapter to 1/4" Hex 2" overall length Sold as one bit in pack Product Description Specs Milwaukee 1/2" Socket Adapter to 1/4" Ball Hex. Insert Bit - 2" Long. Shockwave Bit. Made by Milwaukee Tool. Product Title Overall Length Model # Milwaukee 1/2" Socket Adapter to 1/4" Hex 2"…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in England Henry Taylor Diamic Model No. F4 1" wide blade Forged, hardened & tempered blade Brass ferrule Lacquered Beech handle Product Description Specs A 1" Offset Paring Gouge made by Henry Taylor Tools in England . Offset bent blade. Henry Taylor - Diamic ~ Model No. F4. Made in UK . From the Manufacturer - About Henry Taylor: Established in 1834, Henry Taylor Tools have manufactured a wide range of quality hand-crafted tools through 3 centuries, from our forge based in Sheffield (UK).

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Model S-389-4 - Display floor model - Un-used - Last one For finding centers & truing layout lines Product Description Specs General Tools Wiggler & Center Finder Set. For finding centers & truing layout lines. For locating true vertical center lines of rounds. For holding dial indicators. For set-ups where locations are to be made ground or machine surfaces. Model S-389-4.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Adjustable Frame Accepts 10" & 12" Hacksaw Blades 16" overall length Two Cutting Positions & 3-1/2" Cutting Depth Product Description Specs An Adjustable Frame Hacksaw is ideal for cutting glass, ceramic tile, hardened steel or bone, & variety of other materials at home or on a job site. It has two cutting positions & 3-1/2" cutting depth. Accepts 10" & 12" hacksaw blades.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Curved Pruning Saw with Rubber Grip - Versatile coarse saw designed for green woods Crosscut Teeth: 6 TPI - Coarse Cut 20-1/2" overall length 13" Blade Length Plastic & rubberized handle Includes hard plastic sheath Product Description Specs This Large Curved Pruning Saw with Rubber Grip cuts medium to large branches with an ergonomically designed, rubberized, non-slip grip handle. The teeth on the saw have 6 TPI which allows for very fast aggressive cutting. Versatile large coarse garden outdoor saw designed for green woods. Includes hard plastic sheath for storage.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho