Starrett 245 English Thickness Gage

Made in USA Starrett Model 270 U seful tool for bearing work & for gaging slots M ade of quality tool steel and accurately tapered throughout entire length for quick and convenient measuring 1 1mm (7/16") wide by 160mm (6-1/4") long C an be used as a precision shim O ne side graduated from .010" to .150" in thousandths of an inch; the reverse side from 0.3mm to 4mm in one-twentieth of a mm (0.05mm) Product Description Specs The Starrett 270 Taper Gauge measures hole and slot sizes. It is quick to use, very accurate, & is a convenient size.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Starrett Model 187 R igidly tested after hardening B lack matte finish with gage information steel stamped on one side and white marked on reverse for quick, clear reading Product Description Specs The Jobbers' Drill Gage provides quick sizing of any twist drill from 1/16 to 1/2" by 64ths. This product includes 29 holes that are marked with drill size in inches and decimal equivalents. Approximately 5/64" thick by 2-5/16" wide by 6-1/4" long. Starrett 187 Fractional Drill Bit Sizing Gauge. Made in USA.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Starrett Model 185 Leaves the right amount of stock for approximately 65% full thread S hows correct drill body size 6 0 holes with number sizes and decimal equivalents B lack matte finish with information steel stamped on one side and white marked on the reverse side for quick, clear reading T horoughly tested for accuracy and hardening A pproximately 5/64" thick by 2-5/16" wide by 6-1/4" long Product Description Specs The Starrett 185 Time Saver and Drill Gage provides correct sizing of a tap drill for any commonly sized machine screw tap in NF National Fine or NC…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Starrett Model 198 H ardened with a satin finish Thoroughly tested for accuracy after hardening A pproximate 5/64" thick by 2-5/16" wide and 6-1/4" long Product Description Specs 198 Standard Letter Size Drill Gage provides quick, convenient checking of letter size drills. Twenty-six holes are provided, giving corresponding drill sizes from A through Z - with decimal equivalents from .234" diameter through .413" diameter . Made in USA.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Starrett Model 579B Range: 1/2" to 3/4" (13-19mm) Two telescoping contacts P recision Ground Radius on each gage provides two-point contact for maximum accuracy C onstant spring tension gives uniform contact pressure B oth plungers are easily locked at any desired setting Product Description Specs The Starrett 579 Telescoping Gage is used for determining the true size of holes, slots, and recesses. The ends of both contacts are hardened and ground to a radius to allow proper clearance on the smallest hole the gage will enter.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Starrett Model 579A Range: 5/16" to 1/2" (8-13mm) Two telescoping contacts P recision Ground Radius on each gage provides two-point contact for maximum accuracy C onstant spring tension gives uniform contact pressure B oth plungers are easily locked at any desired setting Product Description Specs The Starrett 579 Telescoping Gage is used for determining the true size of holes, slots, and recesses. The ends of both contacts are hardened and ground to a radius to allow proper clearance on the smallest hole the gage will enter.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Starrett Model 579D Range: 1-1/4" to 2-1/8" (32-54mm) Two telescoping contacts P recision Ground Radius on each gage provides two-point contact for maximum accuracy C onstant spring tension gives uniform contact pressure B oth plungers are easily locked at any desired setting Product Description Specs The Starrett 579 Telescoping Gage is used for determining the true size of holes, slots, and recesses. The ends of both contacts are hardened and ground to a radius to allow proper clearance on the smallest hole the gage will enter.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Starrett Model 156M I ncludes 28 leaves L ocking device 0 .25-2.50mm Range Leave Sizes: 0.25, 0.30, 0.35, 0.40, 0.45, 0.50, 0.55, 0.60, 0.65, 0.70, 0.75, 0.80, 0.85, 0.90 Leave Sizes: 1, 1.10, 1.20, 1.25, 1.30, 1.40, 1.50, 1.60, 1.70, 1.75, 1.80, 1.90, 2, 2.50 Product Description Specs The Starrett 156M Metric Screw Pitch Gage includes locking device, 28 leaves, and 0.25-2.50mm range. 60 Deg Threads. Made in USA.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Starrett Model 579C Range: 3/4" to 1-1/4" (19-32mm) Two telescoping contacts P recision Ground Radius on each gage provides two-point contact for maximum accuracy C onstant spring tension gives uniform contact pressure B oth plungers are easily locked at any desired setting Product Description Specs The Starrett 579 Telescoping Gage is used for determining the true size of holes, slots, and recesses. The ends of both contacts are hardened and ground to a radius to allow proper clearance on the smallest hole the gage will enter.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Starrett Model C398M Very handy for use in grinding and setting screw cutting tools Metric 60 Deg standards V ery useful for finding number of threads per mm and 1/2mm M ade of spring-tempered steel with satin chrome finish G round gaging surfaces Product Description Specs The Starrett Satin Chrome Center Gage is very handy for use in grinding & setting screw cutting tools. Graduations on C398M are in mm and 1/2mm Metric Standard, 60 Deg 1/2mm. Starrett Center gauge. Made in USA.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Starrett Model No. 269A F eatures .001" graduation, .100-500" range Q uick, accurate measurement of hole & slot sizes M ade of tempered steel with a locking device for fixing any leaf in position for use 2-1/2" in Length with 8 leaves Product Description Specs The Starrett 269 Taper Gage features .001" graduation, .100-500" range, is 2-1/2" in Length with 8 leaves. Q uick, accurate measurement of hole & slot sizes . Gauge m ade of tempered steel with a locking device for fixing any leaf in position for use. Made in USA.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Starrett Model 579E Range: 2-1/8" to 3-1/2" (54-89mm) Two telescoping contacts P recision Ground Radius on each gage provides two-point contact for maximum accuracy C onstant spring tension gives uniform contact pressure B oth plungers are easily locked at any desired setting Product Description Specs The Starrett 579 Telescoping Gage is used for determining the true size of holes, slots, and recesses. The ends of both contacts are hardened and ground to a radius to allow proper clearance on the smallest hole the gage will enter.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan Japanese Tile Nipper 8" long size Product Description Specs Japanese Tile Nipper. Made in Japan. Product Overall Length Japanese Tile Nipper 8" For California Residents: WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

When heat needs to surround - bending, soldering pipe, shrinking tubing Use with any Milwaukee Heat Gun Product Description Specs The 49-80-0292 Hook Nozzle can be used with all Milwaukee Heat Guns for bending, soldering pipe, shrinking tubing or any application where the heat needs to surround the work piece. Includes nozzle only .

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Zinc-plated steel #6 size Available as singles, or in a bulk box Product Description Specs #6 washer in zinc-plated steel material. Available as singles, or in a bulk box of 100 pcs. Hardwick & Sons is pleased to offer vintage-style hardware for the many people who desire to fashion their homes with charm, quality, & style. The traditional-style hardware that we showcase are true & faithful reproductions of classic hardware pieces found in the many homes from across America throughout the past century.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Thexton Part No. 356 Un-opened package Product Description Specs Thexton Cooling System Flush Tool. Thexton Manufacturing Company, Minneapolis MINN. Product Thexton Cooling System Flush…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan 4" overall length Easy change reversible ratchet direction Flexible head 3/8" DR Chrome Vanadium Steel Product Description Specs This 4" Stubby Ratchet 3/8" Dr with Flex Head is made of C hrome Vanadium Steel. Easy change reversible ratchet direction. 4" overall length. 3/8" drive. Flexible head. Made in Japan. Hardwick & Sons is pleased to offer quality tools from Japan for the many people who desire special & well-crafted tools.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in England Henry Taylor Diamic Model No. F4 1" wide blade Forged, hardened & tempered blade Brass ferrule Lacquered Beech handle Product Description Specs A 1" Offset Paring Gouge made by Henry Taylor Tools in England . Offset bent blade. Henry Taylor - Diamic ~ Model No. F4. Made in UK . From the Manufacturer - About Henry Taylor: Established in 1834, Henry Taylor Tools have manufactured a wide range of quality hand-crafted tools through 3 centuries, from our forge based in Sheffield (UK).

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan Made of Aogami No. 2 high carbon steel "Blue Carbon Steel" 6 piece set Wooden handles Includes tool roll Product Description Specs These Japanese carving knives are used for marking, trimming, carving & shaping woodworking & bamboo. 6 PC set. Includes a tool roll for storage. Made by Ikeuchi Hamono. Made in Japan. Hardwick & Sons is pleased to offer quality tools from Japan for the many people who desire special & well-crafted tools.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Antique Nickel finish on steel material 5/8" radius corners 4" x 4" size hinge Button tip Removable pin Includes flat head screws Sold as two hinges in pack Product Description Specs A pair of 4 " Antique Nickel Door Hinges with 5/8" radius corners & a removable pin. Antique Nickel finish on steel material. Countersunk holes. Includes flat head screws. 4" x 4" door hinge size. Five knuckle, full mortise design. Ultra Hardware No. 35049.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Classic & popular design Purple color with white lettering 100% spun soft cotton Adult male fit Available in M, XL, & XXL Product Description Specs The classic & ever popular "I Found My Ryoba Nokogiri at Hardwick's" T-shirt. The shirt is made of heavyweight 100% spun soft cotton & the shirt color is purple color with white lettering print. Double needle sleeves & hem for durability. A customer favorite, & a great conversation starter!

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Milwaukee 1/2" Socket Adapter to 1/4" Hex 2" overall length Sold as one bit in pack Product Description Specs Milwaukee 1/2" Socket Adapter to 1/4" Ball Hex. Insert Bit - 2" Long. Shockwave Bit. Made by Milwaukee Tool. Product Title Overall Length Model # Milwaukee 1/2" Socket Adapter to 1/4" Hex 2"…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Model No. 15-106A Excellent for cutting intricate patterns & irregular shapes High-grade carbon hardened & tempered blade provides clean, controlled cutting action 6-1/2" cutting depth - 360 º blade pivot at 45º increments Nickel-plated steel frame & cushion handle Cuts wood, plastic, light metal & wallboard Product Description Specs This FatMax Coping Saw has a high-grade carbon hardened & tempered blade & an ergonomically-designed cushion grip handle.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Special design 100% spun soft cotton Adult male fit Available in S, M, L, XL, & XXL Product Description Specs The special & unique "Squareheads Rule at Hardwick's" T-shirt. The shirt is made of heavyweight 100% spun soft cotton & the shirt color is in an attractive rich red color with ash gray lettering print. Double needle sleeves & hem for durability. A great shirt & a great conversation starter!

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho