Vaughan Dalluge 12" "Da Bar" Nail Puller ~ 4300

Made in Japan Drop-forged & tempered for strength 16" overall length Chrome finish 90° angle offset end Great for removing molding & trim work, prying applications Product Description Specs T his popular 16" "Da Bar" pry bar was created in Japan to Dalluge Tools' highest specifications & are ideal for removing molding & trim work, prying applications. The 4410 Nail Puller Bar measures 16" in length. Thinner & lighter than traditional Japanese bars, Da Bars feature flat claws that slip easily under nail heads to minimize damage to wood surfaces.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan Drop-forged & tempered for strength 24" overall length Chrome finish 90° angle offset end Great for removing molding & trim work, prying applications Product Description Specs T his popular 24" "Da Bar" pry bar was created in Japan to Dalluge Tools' highest specifications & are ideal for removing molding & trim work, prying applications. The 4420 Nail Puller Bar measures 24" in length. Thinner & lighter than traditional Japanese bars, Da Bars feature flat claws that slip easily under nail heads to minimize damage to wood surfaces.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan Drop-forged & tempered for strength 90° angle nail puller paw Special durable slim claw, great for tight spaces Rounded head on nail puller improves leverage Solid surface on head may be used as a hammer Product Description Specs This drop-forged & tempered Dogyu Japanese nail puller is an excellent & efficient tool for the removal of nails with it's special design. Nails can be pulled with either the 90° angled paw, or with the special durable slim claw end, which is great for tight spaces.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in the USA Model No. NP12G Made of high carbon steel, tempered & hardened for strength 12" overall length Designed for extracting deeply imbedded nails The size is excellent for your tool bag Cushion handle Rust-resistant powder coated finish Product Description Specs This high carbon steel hardened & tempered nail puller bar is a stout & handy tool with professionals in mind. This "Cats Paw" has a special head design, heftiness, & stout size that provides the necessary leverage & power for the easy removal of nails.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Model No. BC-8 Made of high carbon steel, tempered & hardened for strength 7-3/4" overall length Two beveled nail slots Rust-resistant powder coated finish Product Description Specs This high carbon steel hardened & tempered scraping bar is a small stout & handy tool with professionals in mind. Nails can be pulled with either the 90° angled paw, or with the special durable claw end, which is great for tight spaces. Rust-resistant powder coat finish. Made in USA.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in the USA Model No. NP12DE Made of high carbon steel, tempered & hardened for strength 11" overall length Designed for extracting deeply imbedded nails The size is excellent for your tool bag Rust-resistant powder coated finish Product Description Specs This high carbon steel hardened & tempered double nail puller bar is a stout & handy tool with professionals in mind. This double "Cats Paw" has a special head design, heftiness, & stout size that provides the necessary leverage & power for the easy removal of nails.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan Drop-forged & tempered for strength 90° angle nail puller paw Special stout flat pry-end 17-3/4" overall length Rounded head on nail puller improves leverage Solid surface on head may be used as a hammer Product Description Specs This drop-forged & tempered Dogyu Japanese nail puller pry bar is an excellent & efficient tool for the removal of nails with it's special 90° angled paw. The other great feature is the opposite pry-end with it's hefty & strong chisel-like end.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan Drop-forged & tempered for strength Nail puller, prying tool, hammer, & scraper all in one tool 90° angle nail puller paw Pry bar end is extra wide & flared with a special curve Rounded head on nail puller improves leverage The size is excellent for your tool bag Product Description Specs This drop-forged & tempered carpenter's Dogyu Japanese pry bar is designed with professionals in mind. Nails can be pulled with either the special wide V-shaped curved tail, or the 90° angled paw.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan Drop-forged & tempered for strength Nail puller, nail set, & mini hammer all in one tool 90° angle nail puller paw 6-3/8" overall length Nail set end tapers to 3/16" diameter Product Description Specs This drop-forged & tempered carpenter's Dogyu Japanese nail set & puller is designed with professionals in mind. Nails can be pulled with ease with the 90° angled paw, & the tapered end is for setting nails. If you need a mini hammer, the solid flat surface at the back of the paw can be used to pound small brad nails as well.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan Drop-forged & tempered for strength Nail puller, prying tool, hammer, & scraper all in one tool 90° angle nail puller paw Pry bar end is extra wide & flared with a special 45° angle Rounded head on nail puller improves leverage The size is excellent for your tool bag Product Description Specs This drop-forged & tempered carpenter's Dogyu Japanese pry bar is designed with professionals in mind. Nails can be pulled with either the special wide & 45° angle V-shaped tail, or the 90° angled paw.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Model No. BC/SB16 Made of high carbon steel, tempered & hardened for strength Nail pulling end has rocker head for maximum leverage 16" overall length Two beveled nail slots Rust-resistant powder coated finish Product Description Specs This high carbon steel hardened & tempered scraping bar is a stout & handy tool with professionals in mind. This " Bear Claw" bar has wide, thin, sharp blades for scraping & cutting. The heftiness & stout size that provides the necessary leverage & power for the easy removal of nails.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Model No. BC-SB10 Made of high carbon steel, tempered & hardened for strength Nail pulling end has rocker head for maximum leverage 10" overall length Two beveled nail slots Rust-resistant powder coated finish Product Description Specs This high carbon steel hardened & tempered scraping bar is a stout & handy tool with professionals in mind. This " Bear Claw" bar has wide, thin, sharp blades for scraping & cutting. The heftiness & stout size that provides the necessary leverage & power for the easy removal of nails.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Model No. 807 Great for reaching hard to get at screws 1/4" slotted & 3/8" slotted Blades are made of machined, ground & hardened tool steel Drive rotation can be reversed instantly 4" overall length Product Description Specs This Ratcheting Offset Screwdriver with slotted blades is ideal for use where screws are concealed or obstructed, leverage is required, or where turning space is limited. 1/4" slotted & 3/8" slotted.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan Made of Aogami No. 2 high carbon steel "Blue Carbon Steel" 6 piece set Wooden handles Includes tool roll Product Description Specs These Japanese carving knives are used for marking, trimming, carving & shaping woodworking & bamboo. 6 PC set. Includes a tool roll for storage. Made by Ikeuchi Hamono. Made in Japan. Hardwick & Sons is pleased to offer quality tools from Japan for the many people who desire special & well-crafted tools.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Model S-389-4 - Display floor model - Un-used - Last one For finding centers & truing layout lines Product Description Specs General Tools Wiggler & Center Finder Set. For finding centers & truing layout lines. For locating true vertical center lines of rounds. For holding dial indicators. For set-ups where locations are to be made ground or machine surfaces. Model S-389-4.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Number "5" house number Made of solid brass material - Lacquered finish 4" size 1/4" thickness Includes two flat head phillips screws Product Description Specs Number Five Solid Brass House Number in a 4" Size. M ade of solid brass material - 1/4" thickness . Lacquered brass finish . Includes two flat head phillips screws. #5 House Number. Hy-Ko Model No. BR-90/5.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Un-opened package - New Stock Norton - Model 87944 Made in USA 3 sharpening stones included in kit: Medium grit, Fine grit, Very Fine grit 6" x 2" x 5/16" size sharpening stones Includes sharpening base Product Description Specs Norton Angle-Rite Sharpener - 3 Stone Sharpening Kit with base. Made in USA. Product Norton Angle-Rite Sharpener - 3 Stone Sharpening…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA · C.S. Osborne ~ Since 1826 Model No. 265 Rawhide palm with riveted joints Iron thimble with heavy duty vinyl attached to rawhide Excellent for leather & canvas Available in both left hand & right hand Product Description Specs A quality USA-made sail palm made by C.S. Osborne. The palm is excellent for sewing leather, canvas, & similar materials. The iron thimble is bound to the rawhide palm. Available in both right & left hand. Made in the USA. From the Manufacturer: Since 1826, the Osborne family had dedicated itself to providing the very finest tools.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Thexton Part No. 356 Un-opened package Product Description Specs Thexton Cooling System Flush Tool. Thexton Manufacturing Company, Minneapolis MINN. Product Thexton Cooling System Flush…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

4 Mil, Powder Free Nitrile Made from materials that comply with FDA regulations Ambidextrous design fits right or left hand Acceptable for food handling Sold as 100 gloves in a box Product Description Specs These powder-free Nitrile gloves are good disposable gloves for a variety of uses including home improvement, shop use, food preparation, painting, cleaning, postal work, security, law enforcement, pet care, hobby work, arts & crafts, etc . Beaded cuff style. *Note Not intended for medical use.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Precision 7/16" size swivel pounce wheel Designed for perforating, dotting, imprinting, tracing, quilting, embossing, overstiching, etc. Body made of Aluminum Product Description Specs Excel 7/16" Swivel Pounce Wheel. Great for tracing, pattern making, marking, quilting, sewing, wooden working & other transferring applications. Made by Excel Blades. Made in USA.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in Japan Olfa Model No. KB4-F/5 Great for intricate cuts on delicate materials 5 blades in pack Japanese premium carbon tool steel 8 mm wide cutting edge Designed for Olfa AK-4 knife & AK-1 knife Product Description Specs These Olfa KB4-F/5 Precision Straight Art Blades are great for making precise, sharp cuts. It's perfect for trimming & deburring plastics, wood, films, narrow cuts & crosscuts. Made from high-quality carbon tool steel, this art blade is perfect for the OLFA Cushion Grip Precision Art Knife (AK-4) & the AK-1/5B Graphic Art Knife. Made in Japan.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

20 oz head weight Drop Forged Steel Head Head made in Japan - Handle made with American Hickory Mill Face - Rip Hammer 15-1/2" overall length Hickory hardwood handle Product Description Specs A Japanese 20 oz Mill Face Rip Hammer with Hickory Handle . Mill waffle face. 15-1/2" overall length. Head made in Japan. Handle made from American Hickory. Mill waffle face.

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho

Made in USA Model No. 520202 - Unused old stock - small amount of rust on shank 1/4" Core Box 2" Overall Length 1/4" shank Product Description Specs Irwin Carbide 1/4" Core Box Router Bit - Made in USA. Carbide - High Grade Steel construction Router Bit. 2" overall length. 1/4" shank. Irwin Blue Diamond Model No. 520202. Made in USA. Product Model # Irwin Carbide 1/4" Core Box Router Bit - Made in USA…

by Hardwick & Sons · Post Falls, ID

🚚 Ships from Idaho